ALZMETALL used machine for sale

: 55 mm : M42 : M56 : MK 4 spindle turning speed - stepless: 70-2400 U/min spindle stroke: 140 mm throat: 300 mm column diameter: 145 mm : 615x430 mm distance spindle /table: min./max. 150/735 mm : 2 x 14 x 224 mm feed: 0,1 + 0,3 mm/U Machine height: 1850 mm weight: 380 kg engine output: 3 kW Standard equipment: - Main switch with motor protection switch lockable - Mushroom pushbutton (latching) for EMERGENCY STOP - Speed adjustment stepless - Speed display digital - Feed overload protection - Protection IP 54 - Spindle protection with electrical protection Pos. 20.1 Tapping device with foot switch, for thread cutting with Stop, max. 6 threads / min., (Tapping power dependent on spindle speed) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 40 mm threading in St 60: M24 threading in GG 20: M30 : MK 3 spindle stroke: 120 mm : 160 - 2250 U/min. throat: 293 mm column diameter: 115 mm : 514 x 360 mm : 2 x 14 x 224 mm distance spindle /table: min. 117 / max. 701 mm feed: 0,1 + 0,2 mm/U height of the machine: ca. 1840 mm weight of the machine ca.: ca. 260 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 18,0 mm throat: 190 mm bore stroke: 80 mm morse taper: 2 Kurzspindel MK turning speeds: 225 - 4.300 U/min voltage: 400 / 50 Hz Volt table:: 300 x 240 mm column diameter: 65 mm engine output: 0,37 / 0,55 kW weight: 110 kg Furnishing: - Large spindle speed range - stepless speed adjustment - machined base plate - Electrically secured spindle protection - Main switch lockable with motor protection switch - Reversing switch for clockwise and counterclockwise rotation - Operating instructions in German Special accessories for an extra charge: - Base cabinet 700 x 600 x 840 mm Item no .: 09. 434, - Euro The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 40 mm : M 24 : M 30 : MK 4 bore stroke: 120 mm throat: 293 mm column diameter: 115 mm : 514x360 mm : 2 x 14 x 224 mm : 117/701 mm feed: 0,10 + 0,20 mm/U spindle turning speed range: 160-2.250 UpM total power requirement: 1,45/1,9 kW height of the machine: 1840 mm weight of the machine ca.: 285 kg Standard equipment: - Mushroom pushbutton (latching) for EMERGENCY STOP - Reversing switch for right-left rotation - Motor protection switch - Speed adjustment stepless - Speed display digital - Feed overload protection - Protection IP 54 - Connector (fully assembled, cable length 2 m) - Spindle protection with electrical protection The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 14 mm : M 10 : MK 2 : 230-4.000 U/min. spindle stroke: 80 mm throat: 190 mm column diameter: 65 mm : 300x240 mm : 2 x 12 x 80 mm : 75/357 mm : 300x240 mm : 2 x 12 x 80 mm : 437/437 mm feed: von Hand : Handkurbel Machine height: 825 mm total power requirement: 0,7 kW weight: 93 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel St 60: 25 mm Drilling capacity in St 60: 30 mm threading in St 60: M 16 : M 20 Short spindle: MK 3 spindle stroke: 140 mm throat: 293 mm column diameter: 115 mm Machine table - usable table surface: 514x360 mm T-Slots Amount - Width - Distance: 2x14x224 mm distance spindle - column min./max.: 132/724 mm feed: von Hand 0: stufenlos Spindle Speed: 225-4300 U/min. engine: 1,0/1,6 kW voltage: 400 V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 34,0 mm throat: 300 mm bore stroke: 160 mm morse taper: 4 MK table:: 615 x 430 mm turning speeds: 100 - 1.800 U/min engine output: 1,4 / 2,2 kW column diameter: 145 mm thread: M24 ST60 thread: M30 GG20 feed: 0,1-0,2-0,3-0,4 mm/U weight: 470 kg Machine height: 1865 mm NEW ALZMETALL MODEL RANGE 7 TFT - LCD display with touch function: Spindle speed setpoint Actual speed display Integrated drilling depth display with touch zero point transfer Virtual drilling depth scale in the display Machine status displays and warnings in the display Service information Selectable user language: DE / EN / FR / ES / IT / NL / RU. Furnishing: - Thread cutting device for thread cutting with a stop max. 6 threads / min (thread cutting performance depends on the spindle speed) Thread depth adjustable via depth stop in the TFT - LCD display (3 tools). - Infinite ...

bore capacity in steel (diameter): 40,0 mm throat: 293 mm bore stroke: 120 mm morse taper: 3 MK table:: 514 x 360 mm turning speeds: 80 - 1.125 U/min engine output: 1,0 / 1,6 kW column diameter: 115 mm thread: M24 ST60 thread: M30 GG20 feed: 0,10 + 0,20 mm/U weight: 270 kg Machine height: 1840 mm NEW ALZMETALL MODEL RANGE 7 TFT - LCD display with touch function: Spindle speed setpoint Actual speed display Integrated drilling depth display with touch zero point transfer Virtual drilling depth scale in the display Machine status displays and warnings in the display Service information Selectable user language: DE / EN / FR / ES / IT / NL / RU. Furnishing: - Thread cutting device for thread cutting with a stop max. 6 threads / min (thread cutting performance depends on the spindle speed) Thread depth adjustable via depth stop in the TFT - LCD display (3 tools). - Infinitely va ...

bore capacity in steel (diameter): 55,0 mm throat: 300 mm bore stroke: 140 mm morse taper: 4 MK table:: 615 x 430 mm turning speeds: 70 - 1.200 U/min engine output: 1,8 / 2,9 kW column diameter: 145 mm thread: M30 ST60 thread: M36 GG20 feed: 0,10 + 0,30 mm/U weight: 380 kg Machine height: 1850 mm NEW ALZMETALL MODEL RANGE 7 TFT - LCD display with touch function: Spindle speed setpoint Actual speed display Integrated drilling depth display with touch zero point transfer Virtual drilling depth scale in the display Machine status displays and warnings in the display Service information Selectable user language: DE / EN / FR / ES / IT / NL / RU. Furnishing: - Thread cutting device for thread cutting with a stop max. 6 threads / min (thread cutting performance depends on the spindle speed) Thread depth adjustable via depth stop in the TFT - LCD display (3 tools). - automatic spi ...

bore capacity in steel (diameter): 32 mm throat: 295 mm bore stroke: 160 mm spindle turning speed - stepless: 110 - 2900 U/min column diameter: 115 mm table-size: 400 x 300 mm spindle taper MT: 3 bore capacity in cast iron: 40 mm total power requirement: 1,2 kW weight of the machine ca.: 330 kg dimensions of the machine ca.: 700 x 900 x 1850 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 40 mm threading in St 60: M24 threading in GG 20: M30 : MK 3 : 160 - 2250 U/min. spindle stroke: 120 mm throat: 293 mm column diameter: 115 mm : 514 x 360 mm : 2 x 14 x 224 mm distance spindle /table: min. 117 / max. 701 mm feed: 0,1 + 0,2 mm/U height of the machine: ca. 1840 mm weight of the machine ca.: ca. 260 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 23 mm threading in St 60: M14 threading in GG 20: M16 : MK 2 : 125-2400 U/min. spindle stroke: 100 mm throat: 250 mm column diameter: 90 mm : 370x300 mm : 2x14x160 mm distance spindle /table: min./max. 140/670 mm : Handkurbel feed: von Hand height of the machine: 1770 mm weight of the machine ca.: 180 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 35 mm throat: 330 mm bore stroke: 165 mm spindle taper: MK4 turning speed range - stepless: 130-480/480-1750 U/min table width: 742 mm table depth: 594 mm total power requirement: 2,2 kW weight of the machine ca.: 700 t Feed with electromagnetic feed clutch 0.1/0,2/0,3 right- and left rotation Cooling unit not available Table and Drilling Head height adjustable height adjustment of upper drilling unit: 200 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 14 mm : M 10 : MK 2 : 230-4.000 U/min. spindle stroke: 80 mm throat: 190 mm column diameter: 65 mm : 300x240 mm : 2 x 12 x 80 mm : 75/357 mm : 300x240 mm : 2 x 12 x 80 mm : 437/437 mm feed: von Hand : Handkurbel Machine height: 825 mm total power requirement: 0,7 kW weight: 83 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 16 mm : M 12 : MK 2 : 100-2.000 U/min. spindle stroke: 80 mm throat: 190 mm column diameter: 65 mm : 300x240 mm : 2 x 12 x 80 mm : 75/357 mm : 300x240 mm : 2 x 12 x 80 mm : 437/437 mm feed: von Hand : Handkurbel Machine height: 825 mm total power requirement: 0,7 kW weight: 83 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Column Drilling Machine make ALZMETALL type AB 35 SMachine -No: 963 Year 1970Drilling capacity in steel 32 mmDrilling capacity in cast 40 mmDrilling capacity in steel 45 mmMorse taper MK 4Discharge 300 mmColumn diameter 145 mmStepless spindle speeds 55 - 1450 rpm.Quill stroke 160 mm3 automatic feeds 0.1; 0.2; 0.3 mm / revTable size 375 x 500 mmDrive power 1.4 / 2.2 kWPower connection 380 V, 50 HzDimensions L x W x H approx . 600 x 800 x 2000 mmusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Column Drilling Machine make ALZMETALL type AB 50 HSTMachine -No: 340 Year 1982Drilling capacity in steel: 50 mmDrilling capacity in cast: 65 mmDrilling capacity in steel: 65 mmThread cutting in ST 60: M 60Thread cutting in cast: M 72Spindle mount: MK 5Projection: 400 mmTable size: 700 x 520 mmQuill stroke: 240 mm5 aut. Feed rates: 0.1-0.4 mm / rev.stepless speeds: 40-1600 rpm.Drive power: 3.0 / 5.0 kWTotal weight: 1400 kgWith- Box stand version- Thread cutting device- aut. feedsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Box column drilling machine make ALZMETALL type AB 3 HSTMachine -No: 1752 Year 1984Drilling capacity in steel St 60:28 mmDrilling capacity in steel St 60:40 mmDrilling capacity in casting GG 20:35 mmThread cutting steel St 60: M 22Thread cutting in cast GG 20: M 33Spindle mount: MK 3Spindle speeds stepless: 130 - 1750 rpm.Discharge: 330 mmSpindle stroke: 160 mmTable size: 600 x 460 mm3 aut. Feed rates: 0.1 / 0.2 / 0.3 mm / revDrive power: 1.0 / 1.6 kWWeight approx.: 700 kgWith- electromag. feed clutch- Semi-automatic workflow- semi-automatic thread cutting- by 200 mm extended stand- Flange quill- Return spring- Tapping device- Revolver drill head grass type ARBO 20 -No: 243xa0xa0 with 6 spindles- aut. pivoting device d. turret- hydr. feed cylinder- Depth drill with 4 depth stops- Drilling depth program switching- electr. Two-hand controlused, in very good conditionPrice on request.Delive ...

Vertical drilling machine make ALZMETALL type Abomat 40Fabr. -No: 147 A built in 1968Drilling capacity in St / GG: 45/60 mmSpindle mount: MK 5Table size: 500 x 500 mm12 spindle speeds: 35 - 1400 rpm.7 automatic feeds: 0.04 - 0.3 mm / revSpindle head diameter: 62 mmDrilling carriage stroke: 400 mmDischarge: 330 mmMax. Distance table to spindle: 1165 mmMax. Distance base plate to spindle: 1550 mmDrive power: 4 hpDimensions L x W x H: 1350 x 600 x 2250 mmWeight approx. 1200 kgWith- semi-automatic workflow- electr. controlled jump feed- Two-hand releaseused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

CNC column drilling machine make ALZMETALL type AC 45Machine -No: 105 built in 1994Technical specifications:Drilling capacity in St: 45 mmDrilling capacity in St: 60 mmDrilling capacity in cast: 60 mmThread cutting capacity in St: M36Thread cutting capacity in cast: M42Tool holder: ISA 40Throat: 350 mmTable size: 750 x 550 mmColumn diameter: 200 mmstepless feed: 1 - 3000 mm / min.Infinitely variable spindle speeds: 35 - 3500 rpm.Drive power: 4.0 kWWeight about 1500 kgWith- Depth programming, rapid traverse, forward and reverse- Syncro tapping- Jump feed- deep hole drilling- Lowering / planning- Step drilling- Enter the drilling depth- Flow drillingused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always a ...

Column drilling machine make ALZMETALL type AB 3 ESMachine -No: 16653Technical specifications:Drilling capacity: 28 mmSpindle mount: MK 3Projection: 293 mmColumn diameter: 115 mmTable size: 400 x 300 mmInfinitely variable spindle speeds: 65 - 1750 rpm.Spindle stroke: 160 mmDrive power: 0.9 / 1.3 kWExternal dimensions approx.: 500 x 900 x 2200 mmWeight approx: 330 kgwith- stepless spindle speeds- R + L run- cooling deviceusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Column drilling machine make ALZMETALL type AB 3 EYear of manufacture 1979Technical specifications:Drilling capacity up to: 32 mmSpindle mount: MK 3Infinitely variable spindle speeds: 65 - 1150 rpm.3 automatic feeds: 0.1 / 0.2 / 0.3 mm / rev.Throat: 280 mmColumn diameter: 150 mmTable size: 350 x 350 mmSpindle stroke: 150 mmDrive power: 2.2 kWPower connection: 380 V / 50 Hzwith- swiveling table- drill chucksused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Column drilling machine make ALZMETALL type AB 25 SVMachine -No: 1717 built in 1976Technical specifications:Drilling capacity in ST 60: 28 mmDrilling capacity in GG 20: 30 mmDrilling capacity in ST 60: 35 mmSpindle mount: MK 3Projection: 293 mmColumn diameter: 115 mmTable size: 500 x 400 mmClamping surface: 400 x 300 mmInfinitely variable spindle speeds: 130 - 480/480 - 1750 rpm.Spindle stroke: 160 mmautomatic feed: 0.14 mm / rev.Drive power: 2.2 kWMachine height approx .: 1860 mmWeight approx: 320 kgwith- stepless spindle speeds- height adjustable table- cooling device- R. + L. runused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Column drilling machine make ALZMETALL type AB 3 ESMachine -No: 81978Technical specifications:Drilling capacity: 28 mmSpindle mount: MK 3Projection: 293 mmColumn diameter: 115 mmTable size: 400 x 300 mmInfinitely variable spindle speeds: 65 - 1750 rpm.Spindle stroke: 160 mmDrive power: 0.9 / 1.3 kWExternal dimensions approx.: 500 x 900 x 2200 mmWeight approx: 330 kgwith- stepless spindle speedsusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Pillar drilling machine make ALZMETALL type AB 60 HSTMachine -No: 203 built in 1985Technical specifications:Drilling capacity ST 60:65 mmDrilling capacity GG 20:75 mmSpindle mount: MK 5Projection: 400 mmTable size: 700 x 520 mmQuill stroke: 240 mmQuill diameter: 98 mm5 automatic feeds: 0.1 - 0.4 mmSpindle speeds infinitely variable: 40 - 1600 rpm.Drive power: 5 / 7.5 kWDimensions approx.: 2000 x 1000 x 2450 mmWeight approx.: 1500 kgWith- Thread cutting device- Table adjustment with hand crank- electric feed clutch- Cooling deviceused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

High performance horizontal boring mill make ALZMETALL type Abomat 30Machine -No: 346, built in 1981revolver drill headNumber of tool holders: 6-foldDrilling capacity: 35 mmDischarge: 330 mmSpindle mount: MK 4Longitudinal table: size 500Adjustment travel: 540 mmRotary tableOperation: manual-hydraulicDiameter: 600 mmfurther techn. Dates:Machining length min / max: 470/1170 mmInsert height of the workpiece: 1223 mmTop height: 235 mmMain motor: 3.2 kWHydraulic motor: 1.5 kWFeed rate: 1.1 kWExternal dimensions: 3000 x 1700 x 2100 mmSpace required incl. Hydraulic and control cabinet approx .: 4000 x 3000 mmWeight approx. 2.5 tonsWith- 6-fold turret GRAS type ARBO 308- Dividing head Fibrotact Y51 400 UN2RA graduation 2; 3; 4; 6; 8; 10; 12; 16; 20; 24; 240smallest partial angle 1.5 °- FIBRO rotary indexing table MY13 800NRA manual-hydraulic, smallest part angle 1 °- Feed FORKARDT F 400- slide ...

Vertical Boring Mill Fabr. ALZMETALL Type ABOMAT 35Machine No: 313 Year 198617155 operating hoursDrilling capacity in steel ST 60: 45 mmDrilling capacity in cast GG 20: 60 mmDrilling capacity steel ST 60: 60 mmThread cutting steel ST 60: M 42Thread cutting Cast GG 20: M 60Long spindle with cross wedge fracture: MK 4Discharge: 330 mmTable mounting surface: 560 x 450 mmBoring stroke: 700 mmRapid traction motor n = 150 min: 1.1 kWFeed motor: 0.25 kW n = 3000 minRapid traverse speed: 4.75 m / minFeed: 0.04 / 0.05 / 0.07 / 0.10 / 0.14Feed size optionally: 0.20 / 0.28 / 0.40 mm / revDrive power: 4.0 kWSpindle speed: 56-2500 rpm.Weight approx .: 1300 kgWith- 6-spindle head ARBO 30No. 139, built in 1989used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be ...

High performance vertical boring machine make ALZMETALL type Abomat 20Machine -No: 212, built in 1982Drilling capacity in St / GG: 25/30 mmOutreach: 280 mmSpindle mount: MK 38 speeds: 160 - 1800 rpm.6 feeds: 71 - 180 mm / min.Table mounting surface: 400 x 500 mmDrilling carriage stroke: 800 mmRapid traverse speed: 4.5 m / min.Weight approx: 530 kgDrive power: 1.45 / 1.9 kWWith- Multi-spindle head- semi-automatic work process- electrically controlled jump feed- Switch cabinet- swiveling operating part- Central lubrication- Cooling device type B with separate tank with pump- Semi-automatic tapping attachment with guide cartridge- Connection flange for mounting a multi-spindle head- Coolant inlet via distributor with inlet to eachxa0xa0 Spindle of the MSK with 1 cock each- Feed unit for drilling carriage movementused, in good conditionPrice on request.Delivery: ex warehouse or location free ...

High performance vertical boring machine make ALZMETALL type Abomat 20Machine -No: 312 Year 1986Drilling capacity in St / GG: 25/30 mmOutreach: 280 mmSpindle mount: MK 38 speeds: 160 - 1800 rpm.6 feeds: 71 - 180 mm / min.Table mounting surface: 400 x 500 mmDrilling carriage stroke: 800 mmRapid traverse speed: 4.5 m / min.Weight approx. 530 kgWith- semi-automatic work process- electrically controlled jump feed- Switch cabinet- swiveling operating part- Central lubrication- Coolant device- electr. controlled free-cutting device- semi-automatic threadingxa0xa0 by means of Leit cartridge deviceused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machin ...