presses used for sale

sell a Strautmann PET BP 900 for PET bottles! Built in 2006, just a few hours of operation!

: gebraucht : 2005 : 7289 : prompt, Zwischenverkauf v : Italien : 13800 €: 1 : 20 to: 550 mm: 370 mm: 110 mm: 5 - 75 mm: 160 1/min: 187 x 143 mm: 35 mm: 38 mm: 185 mm: 225 mm: 225 mm: 1,5 kW: 1050 mm: 1250 mm: 2100 mm: 1150 kg2 V-guidesFront and side table shielding by safety doors2-hand control and foot pedalClamping plateThickness table and clamping plate 50/50 mmUser Manual in GermanCE Declaration of conformityThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used Baler Manufacturer: MAC Press Type: 108 Year of construction: 2018 Operating hours: approx. 20,000 specifications: Press force: 120 t Specific pressing force: 11.0 kg/cm² Duct format: 1,100 x 1,000 mm (H x W) Filling opening: 1,800 x 950 mm Drive power: 75 kW Idle times per minute: 4 Filling chamber volume: 2.0 m³ Binding: 5-fold horizontal Oil tank: 3,100 ltr. Machine weight: approx. 39.2 t

: neu : ca. 8 Wochen ab Auftragse : Italien : 70 to: 4 mm: 920 mm: 500 mm: 180 mm: 12 - 120 mm: 50 - 80 1/min: 8 : 80 mm: 260 mm: 560 mm: 7,5 kW: 1225 mm: 1865 mm: 3060 mm: 7000 kgouch screen controlsemi automatic stroke adjustmentdie space adjustment with mechanical display decimal resolutionadjustable motor speedoverload protectordouble bolster plateoil circular lubricationdynamic brakeAutomation and control of press parameters by PLC, alarms and informations displayed on human machine interface touch screen.Standard monitoring:- press speed view and adjustment- programmable piece counter and maintenance piece counter- die space adjustment with brake motor- semi automatic or automatic stroke adjustment- die safety controls- alarms view- overload protectorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Baler Paal Pacomat III-50 C, built in 2014, very good condition, available from the end of July / beginning of August Specifications: Manufacturer: Paal Type Pacomat III-50 C Year of construction 2014 Hours 1750 Press force 50 t Drive power 22 kW Total power 39 kW Filling opening 1200 x 950 mm Bale dimensions 750 x 1000 mm, length variable Setting 4-fold automatic Throughput 120 m³/h Throughput at 35 kg/m³ approx. 4.2 t/h 50 kg/m³ approx. 6 t/h Bale weight up to 500 kg Transport dimensions approx. 8000 x 2000 x 2500 mm (LxWxH) Machine weight approx. 12 t Materials: paper, cardboard, foil, PET, etc.

: gebraucht : 2015 : 7290 : prompt, Zwischenverkauf v : Türkei : 21400 €: 40 to: 630 mm: 450 mm: 150 mm: 5 - 75 mm: 153 1/min: 415 x 275 mm: 68 mm: 40 mm: 230 mm: 280 mm: 4 kW: 1300 mm: 1700 mm: 2150 mm: 2950 kg8-fold ram guideClamping plateLight barrier protection2-hand control panel and foot pedalManual central lubricationUser Manual in German with CE Declaration of ConformityThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

used cabinet press Manufacturer: Maschinenfabrik Bermatingen GmbH & Co. Type: DIXI 30 S Year of construction: 2009 Serial No.: 109139 specifications: Pressing force: 30 t Filling opening: 1,200 x 670 mm (W x H) Height from the ground: approx. 940 mm Split egg filling opening: 1,070 x 260 mm Height from the ground: 1,310 mm Bale size: 1,200 x 800 x 800 - 1,100 mm Bale weight: up to 270 - 360 kg Drive power: 7.5 kW Cycle time: approx. 29 sec. Pressing time: approx. 14 sec. Binding: 4-fold - vertical with poly strap Machine dimensions: 1,600 x 1,300 x 3,170 mm (W x D x H) Machine weight: 2,180 kg Transport height: 2,240 mm (Subject to errors in the technical data)

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 97700 €: 1983.31 €: 130 to: 1000 mm: 640 mm: 210 mm: 5 - 110 mm: 60 1/min: 630x400 mm: 90 mm: 330 mm: 11 kW: 2200 mm: 1372 mm: 3000 mm: 8200 kg8-fold ram guidefront protection by light guardmanual ram adjustmentmech. overload safety deviceautomatic lubricationuser manual in GERMAN and ENGLISHaccording to CE rulesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

used baler Manufacturer: PAAL Type: PACOMAT II-50 D Year of construction: 2020 Operating hours: approx. 12,000 specifications: Press force: 50 t Specific pressing force: 69 N/cm² Bale weights: up to approx. 450 kg depending on type and bale length Drive power: 45 kW Throughput: approx. 243 m/h Total connected load: 56 kW Duct format: 1,000 x 700 mm (H x W) Filling opening: 1,050 x 620 mm Lacing of the bales: 4 x horizontal Wire pass-through in the pressing direction seen on the right side Oil volume: approx. 750 liters including: Wire unwinding devices for approx. 40 kg wire rings Light barrier control Automatic-hydraulic infeed of the press channel The machine will be available at the end of March / beginning of April 2024.

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 119800 €: 160 to: 1100 mm: 700 mm: 210 mm: 15 - 110 mm: 60 1/min: 630x400 mm: 95 mm: 325 mm: 2400 mm: 1430 mm: 3200 mm: 9950 kg8-fold ram guidelight guardmot. ram adjustmenthyd. overload safety deviceautomatic lubricationaccording to CE rulesuser manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cabinet press incl. tilting device Manufacturer: HSM Type: V-Press 860 TimeSave Year of construction: 2021 Specifications Press force: 594 kN Specific pressing force: 63.46 kN/cm² Drive power: 7.0 kW (4.0 + 3.0 kW) Voltage/Frequency: 400 V / 50 Hz Press capacity idle (theoret.): 26.25 m³/h Bale dimensions: 1,200 x 780 x 1,200 mm Bale weight: up to approx. 430 kg Type of feeding: autom. Lift-tilt device with lattice trolley Machine dimensions: 2,202 x 3,584 x 3,004 mm (W x D x H) Binding: manual with quick-link wire Suitable for: cardboard + mixed paper

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 79600 €: 1615.88 €: 110 to: 900 mm: 540 mm: 180 mm: 14 - 114 mm: 60 1/min: 490x325 mm: 90 mm: 280 mm: 7,5 kW: 1870 mm: 1320 mm: 2800 mm: 5600 kg8-fold ram guidefront protection by light guardmanual ram adjustmentmech. overload safety deviceautomatic lubricationuser manual in GERMAN and ENGLISHaccording to CE rulesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

fully automatic baler Manufacturer: BAUER Type: 500 Year of construction: 1993 specifications: Press force: 50 t Specific pressing force: 6.68 kg/cm² Channel format: 680 x 1,100 mm Bale weight: 450 - 550 kg, depending on material and bale length Filling opening: 1,600 x 1,020 mm Filling volume: 1.66 m³ Drive power: 2 x 22 kW Throughput: - Idle approx. 450 m³/h - under operating conditions approx. 200 m³/h Press services at: - 20 to 30 kg/m³ bulk density approx. 4 to 6 t/h - 35 to 50 kg/m³ bulk density approx. 7 to 10 t/h - 60 kg/m³ bulk density approx. 12 t/h - 100 kg/m³ bulk density approx. 18 t/h Machine weight: approx. 21 t Optionally with chain conveyor belt according to pictures. Subject to accuracy of technical data.

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 151600 €: 200 to: 1200 mm: 740 mm: 220 mm: 24 - 140 mm: 50 1/min: 950x600 mm: 100 mm: 390 mm: 15 kW: 2350 mm: 1700 mm: 3435 mm: 14900 kg8-fold ram guidelight guardmot. ram adjustmenthyd. overload safety deviceautomatic lubricationaccording to CE rulesuser manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

used baler Manufacturer: PAAL Type: CPH 6540 Machine number: 29600 Year of construction: 2008 Main parts of the press: 1 automatic channel press 1 automatic lacing 1 hydraulic system 1 electrical control Press force at approx. 300 bar: 650 kN Duct cross-section (h x w): 75 x 100 cm Filling opening (l x w): 160 x 92 cm Number of binding wires: 4 pieces Power: - Wire pull: 3 kW - Twisting: 3 kW - Main drive pump: 75 kW Hydraulic oil tank volume: 2200 l Machine weight: approx. 14 t, depending on equipment Operating voltage: 3 x 400 VAC / 50 Hz / N / PE Press complete for continuous operation including: Machine design consisting of: - Pressure plate with roller guide mounted on the inside at the bottom, - Press box floor made of highly wear-resistant special steel, - replaceable, screwed running dies for the lower pr ...

: gebraucht / neuwertiger Z : 2019 : 7191 : prompt, Zwischenverkauf v : Italien : 43200 €: 1 : 50 to: 800 mm: 450 mm: 11 - 110 mm: 60 - 100 1/min: 8 : 70 mm: 235 mm: 5,5 kW: 1330 mm: 1000 mm: 2650 mm: 5000 kgwith 8-fold ram guidefixed tablesemi-automatic stroke adjustmentmotorized ram adjustmentVariable speed motorhydraulic overload protectiondynamic brakingplatenautomatic circulation lubricationsafety light guard KeyenceAntivibrationspadsPEDALCOVER PLATE FOR HOLE IN THE TABLEuser manual in GERMAN or ENGLISHAutomation and control of press parameters by PLC, alarms and informations displayd on human machine interface touch screen.Standard monitoring:- press speed view and adjustment- programmable piece counter and maintenance piece counter- die space adjustment with brake motor- Semi automatic or automatic stroke adjustment- die safety control- alarms view- overload protectorThe data fo ...

used cabinet press Manafacture: HSM Type: V-Press 840 plus Year of construction: 2011 Machine No.: 6147.244. Serial No.: 340001635 Z specifications: Pressing force: 36 t / 356 kN Transport length approx. 1,780 m Transport width approx. 1,247 m Transport altitude approx. 2,985 m Insertion opening width approx. 1,195 m Insertion opening height approx. 0.65 m Drive power 4 kW Weight approx. 1.8 t Bale weight up to approx. 360 kg Binding: 4-fold vertical (Subject to errors in the technical data)

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 67700 €: 1374.31 €: 63 to: 750 mm: 500 mm: 170 mm: 4 - 102 mm: 54 1/min: 490x325 mm: 90 mm: 270 mm: 440 mm: 7,5 kW: 1800 mm: 1150 mm: 2750 mm: 4100 kg8-fold ram guidefront protection by light guardmanual stroke adjustmentram adjustment witch ratchetdrive over gearcombined clutch brake unit with pneumatic controlfix tablesingle and continuous strokefoot pedal and 2 hand controlmech. overload safety deviceautomatic central lubricationuser manual in GERMAN and ENGLISHaccording to CE rulesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

used cabinet press Manafacture: HSM Type: VL 155.2 Year of construction: 10 / 2004 Machine No.: 6114.134. S Serial No.: 250143017 specifications: Pressing force: 16 t Filling opening: 1,100 - 590 mm Filling space - 1100 - 700 x 1130 mm Bale size: 1,100 x 700 x 950 mm Bale weight: 110 - 200 kg Drive power: 4 kW Binding: 4-fold - vertical Output: 4 - 8 bales/hour Machine dimensions: 1,450 x 926 x 2,270 mm (W x D x H) Machine weight: 940 kg (Subject to errors in the technical data)

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 74200 €: 1506.26 €: 80 to: 900 mm: 540 mm: 180 mm: 4 - 102 mm: 54 1/min: 490x325 mm: 280 mm: 380 mm: 7,5 kW: 2010 mm: 1390 mm: 2750 mm: 5400 kg8-fold ram guidefront protection by light guardmanual stroke adjustmentram adjustment witch ratchetdrive over gearcombined clutch brake unit with pneumatic controlfix tablesingle and continuous strokefoot pedal and 2 hand controlmech. overload safety deviceautomatic central lubricationuser manual in GERMAN and ENGLISHaccording to CE rulesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

used cabinet press Manafacture: HSM Type: 155.1 VL Year of construction: 1998 Machine no.: 6118.114. 01217M Serial no.: 6118.01217 specifications: Pressing force: 18 t Filling opening: 1,100 - 590 mm Filling space - 1100 - 700 x 1130 mm Bale size: 1,100 x 700 x 950 mm Bale weight: 110 - 200 kg Drive power: 4 kW Binding: 4-fold - vertical Output: 4 - 8 bales/hour Machine dimensions: 1,450 x 926 x 2,270 mm (W x D x H) Machine weight: 940 kg (Subject to errors in the technical data)

: neu : ca. 10 Wochen ab Auftrags : Italien : 100 to: 5 mm: 1000 mm: 630 mm: 180 mm: 15 - 140 mm: 45 - 70 1/min: 8 : 90 mm: 320 mm: 570 mm: 11 kW: 1320 mm: 2200 mm: 3080 mm: 10000 kg8-fold ram guidefixed tablesemi-automatic stroke adjustmentmotorized ram adjustmentVariable speed motorhydraulic overload protectiondynamic brakingplatenautomatic circulation lubricationfront protection by photocellsuser manual in GERMAN or ENGLISHAutomation and control of press parameters by PLC, alarms and informations displayed on human machine interface touch screen.Standard monitoring:- Press speed view and adjustment- programmable piece counter and maintenance piece counter- die space adjustment with brake motor- semi automatic or automatic stroke adjustment- die safety control- alarms view- overload protectorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

used cabinet press Manafacture: HSM Type: VL 155.2 Year of construction: 02 / 2003 Machine No.: 6114.734. R Serial No.: 240035357 specifications: Pressing force: 16 t Filling opening: 1,100 - 590 mm Filling space - 1100 - 700 x 1130 mm Bale size: 1,100 x 700 x 950 mm Bale weight: 110 - 200 kg Drive power: 4 kW Binding: 4-fold - vertical Output: 4 - 8 bales/hour Machine dimensions: 1,450 x 926 x 2,270 mm (W x D x H) Machine weight: 940 kg (Subject to errors in the technical data)

: neu : ca. 8 Wochen ab Auftragse : Italien : 250 to: 8 mm: 1400 mm: 800 mm: 250 mm: 23 - 220 mm: 25 - 50 1/min: 950x620 mm: 8 : 120 mm: 410 mm: 820 mm: 33 kW: 1600 mm: 2900 mm: 4250 mm: 25000 kgtouch screen controlsemi automatic stroke adjustmentdie space adjustment with mechanical display decimal resolutionadjustable motor speedoverload protectorautomatic cams resetdouble bolster plateoil circular lubricationdynamic brakeAutomation and control of press parameters by PLC, alarms and informations displayed on human machine interface touch screen.Standard monitoring:- press speed view and adjustment- programmable piece counter and maintenance piece counter- die space adjustment with brake motor- semi automatic or automatic stroke adjustment- die safety controls- alarms view-overload protectorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

used cabinet press Manafacture: HSM Type: VL 155.2 Year of construction: 08 / 2003 Machine No.: 6114.734. R Serial No.: 240141892 specifications: Pressing force: 16 t Filling opening: 1,100 - 590 mm Filling space - 1100 - 700 x 1130 mm Bale size: 1,100 x 700 x 950 mm Bale weight: 110 - 200 kg Drive power: 4 kW Binding: 4-fold - vertical Output: 4 - 8 bales/hour Machine dimensions: 1,450 x 926 x 2,270 mm (W x D x H) Machine weight: 940 kg (Subject to errors in the technical data)

: neu : 2024 : 7298 : prompt, Zwischenverkauf v : Türkei : 20100 €: 412.05 €: 1 : 10 to: 1.4 mm: 270 mm: 370 mm: 100 mm: 1 - 40 mm: 200 1/min: 4 : 35 mm: 25 mm: 160 mm: 180 mm: 0.75 kW: 1170 mm: 1180 mm: 1700 mm: 590 kgwelded steel construction body frame4-fold ram guidepneumatic clutch-brake combinationphotocell light barrierstwo hand and foot pedal controlmanual adjustable strokemanual central lubricationaccording to CE rulesOptions: vibrations pads € 132,- bolster plate € 220,-Photo shows the machine with optional bolster plateThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

used cabinet press Manafacture: HSM Type: VL 155.2 Year of construction: 08 / 2003 Machine No.: 6114.734. R Serial No.: 240141893 specifications: Pressing force: 16 t Filling opening: 1,100 - 590 mm Filling space - 1100 - 700 x 1130 mm Bale size: 1,100 x 700 x 950 mm Bale weight: 110 - 200 kg Drive power: 4 kW Binding: 4-fold - vertical Output: 4 - 8 bales/hour Machine dimensions: 1,450 x 926 x 2,270 mm (W x D x H) Machine weight: 940 kg (Subject to errors in the technical data)

: neu : 2024 : 7297 : prompt, Zwischenverkauf v : Türkei : 40200 €: 816.06 €: 1 : 40 to: 2.5 mm: 450 mm: 650 mm: 150 mm: 1 - 80 mm: 125 1/min: 4 : 75 mm: 40 mm: 225 mm: 300 mm: 4 kW: 1350 mm: 1370 mm: 2160 mm: 2100 kgwelded steel construction body frame4-fold ram guidepneumatic clutch-brake combinationphotocell light barriersmechanical overload protectiontwo hand and foot pedal controlmanual adjustable strokemanual central lubricationaccording to CE rulesOPTION:Vibration pads € 192,--Bolster plate € 830,--The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

used cabinet press Manafacture: HSM Type: VL 155.2 Year of construction: 10 / 2004 Machine No.: 6114.734. S Serial No.: 250143017 specifications: Pressing force: 16 t Filling opening: 1,100 - 590 mm Filling space - 1100 - 700 x 1130 mm Bale size: 1,100 x 700 x 950 mm Bale weight: 110 - 200 kg Drive power: 4 kW Binding: 4-fold - vertical Output: 4 - 8 bales/hour Machine dimensions: 1,450 x 926 x 2,270 mm (W x D x H) Machine weight: 940 kg (Subject to errors in the technical data)

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 25700 €: 521.71 €: 15 to: 1.4 mm: 320 mm: 490 mm: 130 mm: 1 - 40 mm: 200 1/min: 4 : 40 mm: 30 mm: 200 mm: 215 mm: 1.5 kW: 1160 mm: 1180 mm: 1730 mm: 922 kgwelded steel construction body frame4-fold ram guidepneumatic clutch-brake combinationphotocell light barrierstwo hand and foot pedal controlmanual adjustable strokemanual central lubricationaccording to CE rulesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.