We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
Manufacturer:
(Category: 842)
used
used
Size: A4
used
Register punch Masch-No.: 52757/6 with printer 2 FA-OR. Cutting length 315 mm, depth 4 mm, max. 40 mm. Cutting thickness max. 7 mm. Clamping thickness: 1-9 books, max. 50 mm. Spine length max. 400 mm. min. Book width: without printer min. 4 mm cutting depth, max. book thickness 10 - 88 mm (with printer up to 95 mm). Connection 220V, 50/60 Hz, compressed air 6 bar, max. Speed 120/ min. Various knife sets
used
Size: A4
used
electric (380Volt) register punch with manual block clamping and register punch, bolt-action device for the production of registered handles,
used
Size: 730 x 1040 mmEquipments:Thickness of material: 0,1 - 2 mmDie-cutting precision: ±0.1 mmMax. speed: 7.500 sheets / hourMax. feeding pile height: 1280 mmMax. pressure: 300 Tons
used
Stripping Device, Varioplan System, Mabeg Non-Stop Feeder with Pre-Loader, Non-Stop Delivery, Centerline, Elevated, Sidelays On Operator And Off-Side, Formats: Max. 750x1050mm, Min. 350x400mm, Max. Cardboard Thickness: 1,8mm, Max. Corrugated Cardboard Thickness: 3mm, Speed: 9000 Sheets/Hour
used
Size: 500 x 750 mmEquipments:Max. pressure: 200 TonsMax. speed: 10.000 sheets / hourThickness of corrugated paper: 80 g / m²Heating temperature: 0 - 199°CHeating zone: 10Max. feeding pile height: 1280 mmDie-cutting precision: ±0.1 mm
used
Mabeg Non-Stop Feeder, Stripping Device, 100-2000 g/m2, Max. 6500 Strokes Per Hour, 320 Tons Cutting Pressure, Format: Max. 800x1120mm, Min. 500x360mm, Standard Accessories
used
Max. label dimensions: 2x5.5 inch, max. printing speed: 152/min, weight: 150kg, operational hours counter: 573h.
used
Min size 10x10 mm Max size 260 x 280 mm Banding device In/line Busch BD30 Automatic banding device Min banding sizes 25 x 60 mm Max banding size 140 x 200 mm Speed 14 cycles per minute - 840.000 sheets per hour Banding width 20/30/40 mm Banding materials PE-foil Details operated by light curtain, once the operator pulls away their hands the machine will make a cycle, PLC diagnostics display readout for BD30 condition excellent Unit BD30 all pneumatic revised until leak free after order a few more things will be performed Available failry soon after order
used
There are two Domino A400 available, were not used for eight years, with ten printing heads.
used
Make Erba Model Titan 3 Year 1970 ? Max size 800 x 1200 mm Details 2 chases, threadle operated, complete with adjutment key
used
Speed: 3-90m/min, with documentation.
used
For punching out packing material (paper and cardboard) Various die-cutting stencils for chocolate bars and chocolates Produced at Hamburg. (cost approx. 300€) Good condition, still in use Y/O'A 1991 From Germany
used
There are 21 identical label printer available.
used
Heidelberg KSB, Year 1969 400x570 mm (15.7x22.5") used for die-cutting Standard Available: at short term
used
Bahmüller & Göpfert, • BGM Caseline 16/32, • year: 1988, • 2 colour flexo, • slotter with robot setting, • Rotary punch, • Folding machine with vacuum transport, • Tape adhesive from Neubronner (Tapen), • Stitching machine from Bahmüller (Stitchen), • Counting and alignment station, • Transfer station to the bundling machine, • Signode bundling machine (year 1994), • Automatic palletizing system from Bahmüller, • Material removal, • Max Size: 1675 x 3200mm, with SkipFeed: 2100 x 3200mm, • Palletizing height: 2, • Cliché height: 7.35mm, • year: 1988, • Max Size: 1675 x 3200mm, • Palletizing height: 2, • Cliché height: 7,35mm
used
Heidelberg KSB, Year 1964 400x570 mm (15.7x22.5") Standard used for die-cutting Available: at short term
used
max. plate width: 80 cmstamp width: 425 mmserial no.: 174 plate punch autoplateThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Bobst SP 142 ER Year 1981 Max.Size: 1420x1020mm Min.Size: 700500mm Max Speed: 6000sh/h Max. cutting force: 600T center line Without blanking – only separating possible.
<br><br><br>Still in operation: Yes<br>Verf Gbar: Immediately
used
Enko ES 1800 ST, Year: 2009, TECHNICAL SPECIFICATION, Suitable for the following materials, Solid board up to 300 g/m², Corrugated and laminated corrugated 0.5 - 12 mm, Cabability specifications, Sheet size …………………………………………………………… …………………… max. 1800 x 1300 mm, min. 800 x 700 mm, Cutting pressure max. (450 t) 4.5, Maximum number of strokes max. 3000 s/h, Dimensions and Weights, Length of machine approx. 6300 mm, Width of machine approx. 3200 mm, Height of machine approx. 2150 mm, Weight of machine aprox. 24 t, Pile height, Feeder max 1200 mm, Delivery max. 1160 mm, Technical Data, Gripper edge margin, adjustable from 10 - 18 mm, Cutting knife height 23.8 mm, Wood front edge 27 mm, Electrical connected load 48 KW, Electrical supply 3 Ph, 400 B.C, 50 Hz, Compressed air required 6 bar (kg/m²)
<br><br><br>Still in operation: Yes<br>Available: immediately
used
Heidelberger Dymatrix 105 CS, Baujahr: 2005, min. Format: 350 x 400 mm,, max. Format: 740 x 1050 mm,, max. Stanzfläche: 740 x 1050 mm,, max. Materialstärke: 2000 g/m2 (Wellpappe bis 4 mm),, Funktionen: Stanzen, Rillen, Perforieren, Prägen, Ausbrechen, Gesamtstunden: 4.765 Stunden, Gesamthübe: 15.890.209
refurp-up in 2007 Spare partsStill in operation: YesAvailable: immediately
used
Bobst SP 142 E year: 1978 Max speed: 6500 sh/h Max Size: 1020x1420mm Minimum Size: 500x700mm
overhauled in 2007 spare partsStill in operation: YesAvailable: sofort
used
ENKO Year: 2014 Model: EA 2200 STFT Technical Specification of Standard Machine Suitable for the following materials: Solid Board - up to 300gsm Automatic Top Feeder - up to 500 g/m² Corrugated and laminated Corrugated - 0.5 - 12mm Cabability specifications Sheet size: max. 2200 x 1700 mm min. 700s 500mm Cutting pressure: max. 440t Max. number of strokes: max. 2200 s/h Dimensions and Weights Length of machine: approx. 9400mm Width of machine without platform : approx. 3285mm Height of machine: approx. 2815mm Weight of machine: approx. 45t Pile height Delivery with 300mm elevation max.1600mm TechnicalData Gripper edge margin, adjustable from 10 - 18 mm Cutting knife height: 23.8 mm, Year: 2014, model: EA 2200 STFT, Cutting pressure: max. 440t