welding machines used for sale

approx. 3000 x 1500 mm with 1 scissor lift table (Gruse)

weight max.: 60 tworkpiece diameter: 6000 mmgear diameter: 680 mmgear width: 230 mmDistance of shafts: 900-3500 mmaxis height: 550 mmtotal power requirement: kWweight of the machine ca.: 4,5 (9 ) tdimensions of the machine ca.: mLoad capacity per piece 30 t load-carrying along 60 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cloos MIG 350 Synergic - Welding machine - Metal invert gas welding (MIG) and metal active gas welding (MAG) of steel, aluminum and chromium-nickel - Incl. operating instructions - Built in 2007 Specification Entrance: - Nominal input voltage: 3/PE AC 400 V - Nominal frequency: 50 Hz - Maximum input current: 23 A - Mains fuse sluggish: 32 A - Mains connection cable: 4 x 4 mm² - Power plug: 32 A Exit: - Open circuit voltage Uo: 18 - 45 V - Welding range: 30 - 350 A - Duty cycle 100 %: 220 A - Duty cycle 60 %: 280 A - Duty cycle 40 %: 350 A General data: - Noise emission: < 70 dB(A) - Schutart: IP 23 - Cooling type: AF - Dimensions WxHxD: 430 x 930 x 980 mm - Weight: 160 kg

table length: . mmtable width: . mmtable height: . mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: melectrical, tiltable welding tableThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- Suitable for arc welding, cutting/deburring & grinding/polishing - Built in 1997

length: . mmheight: . mmtotal power requirement: . kWweight of the machine ca.: . tdimensions of the machine ca.: . mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 500 machines in stockMore than 8,500 m² of storage space, crane capacity 70 tMore than 10,000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 7540 Type: AWL 1100 T Cascade Producer: Cebora Created: 2018 Parameters: Max. welded length: 1100 mm Welding speed: 3 m/min Weight: 800 kg

floor-plate length: 4500 mmfloor-plate width: 1600 mmfloor-plate height: 370 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 7530 Type: TruLaser 2030 Producer: Trumpf Created: 2018 Parameters: Duty cycle: 7313 h Hours: 4727 h Laser power: 2 kW Work table length: 3000 mm Work table width: 1500 mm Maximum table load (uniform): 900 kg Source: TruDisk 2001 Machine height: 2300 mm Machine length: 8276 mm Machine width: 6764 mm Machine weight: 7750 kg

tool adaptor: . weight: . kgmaterial: . The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 1748 Type: KR5si5xx R850 Producer: KUKA Created: 2008

floor-plate length: 4500 mmfloor-plate width: 1600 mmfloor-plate height: 380 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 4060 Type: ARC Mate 120iB Producer: FANUC Created: 2007 Parameters: Control System: R30iA Hours: 985 h Axles: 6 Payload: 20 kg H-reach: 1667 mm Repeatability: ± 0.0800 mm Source: Kempi – KEMPARC SYN300 Mains voltage: +-10%: 3x400 Power: 320 A Weight: 220 kg Accessories: Robot with 2 separate workstations: Danubius positioner and clamping table Dust extraction: POC 20 Table Metal Fence

floor-plate length: 4600 mmfloor-plate width: 1620 mmfloor-plate height: 380 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 5559 Type: ARC Mate 100iB Producer: Fanuc Created: 2007 Parameters: Control system: FANUC SYSTEM R-30iA Duty cycle: 2000 h Maximum arm reach: 1373 mm Number of axles: 6 pieces Maximum load capacity: 6 kg Source: MIGATRONIC FLEX 4000 Nominal current: 7 A Accuracy: 0.08 mm Machine weight: 135 kg External Wire Feeder Cleaning station Base Control panel and control panel Simple table design

current capacity: 16 kVAthroat: . mmcontact pressure capacity: . kptotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 6619 Type: SONIX 0510i – H Producer: YUDO-STAR Created: 2012 Parameters: Axis X: 2500 mm Axis Y: 660 mm Z axis: 1000 mm Number of axles: 3 pieces Load capacity in the 3rd axis: 8 kg Equipment: 2x Vacuum Touch screen

weight max.: 40 tworkpiece diameter: 7000 mmroll diameter - bore: 500 mmWheel width: 180 mmDistance of shafts: 100-3000 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 6133 Type: PW 75/5 Producer: PROFIWELD Created: 2015 Parameters: Connection voltage: 480 V Power: 75 kVA Pressure: 0.6 MPa Cooling water flow: 12 l/min Frequency: 50/60 Hz

table length: 1050 mmtable width: 1050 mmtable load: 3,6 ttable - tiltable: 0 - 135 °table rotation: 360 °table rotation speed: variabel einstellbar U/mintotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: 2,35 x 1,70 x 2,00 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 6854 Type: HTL 2500 Producer: EG Created: 2014 Parameters: Load capacity: 2500 kg Equipment: Connecting frame (column spacing 4200 mm)

cutting range for steel to: 76 mmcapacity at 100%: 51 mmcutting medium: 400 Ampregulated drive: 50-150 und 100 - 400 AmpSteuerSteuercontrol voltage: 24 Voltweight of the machine ca.: 750 kgdimensions of the machine ca.: 82 x 122 x 930 cmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 6855 Type: MA 1900 Producer: Motoman Created: 2012 Parameters: Operating hours: 2200 h The workstation consists of the following parts: Motoman MA 1900 Robot (DX 100 Controller) Source: Lorch Saprom Speed Pulse S8 Tbi Welding Torch GUDEL track - type TMF-1/4000 - with a carriage for a barrel with welding wire 2x fixed table with dimensions 2000x1500 mm and a load capacity of 650 kg Horizontal positioner WESTAX WXH-150 (load capacity 1500 kg) 3x internal automatic workstation doors 3x external telescopic doors 3x SICK safety scanners Automatic cooker hood 2x manually hinged hood Superior control system WESTAX RCU 50 TBI JetStream Automatic Welding Torch Cleaner Positioning frame in HOBES for the storage of fixtures Fencing of the robot workstation

volume capacity: 1.600 cbm/hvoltage: 230 Vtotal power requirement: 1,1 kWweight of the machine ca.: 80 kgdimensions of the machine ca.: 0,60 x 0,60 x 0,95 m- Factory No.: P20145310011018- operating hours: 11.050 h- incl. 3m suction armThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 7291 Type: Romat 410 Producer: Cloos Created: 2007 Parameters: Control system: Rotrol II Welding machine: MC3R 553 Workstation with one track: 10 m

table length: 1150 mmtable width: 1150 mmtable load: 2 ttotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mBrand: JWeldingType: HB-20Capacity: 2.000 kgPlateau dimensions: 1.150 mm øWorking height platform, horizontal: 1.180 mmWorking height platform, vertical: 1.000 mmRotation diameter vertical: 1.550 mm øT-slots: 8Electrically tiltableThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 7236 Type: AX 21 Producer: OTC Daihen Created: 2011 Parameters: Maximum load capacity: 6 kg Total power requirement: 2600 W Machine weight: 160 kg

: neu : 2022 : 2481 : prompt, Zwischenverkauf v : 2130 €: 1917 €: 1 : 2000 x 1000 mm: 850 mm: 450 kg: 28 mm- Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes- Hard chrome-plated table surface Cr75The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market.- Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers)- Grid lines 100 x 100 mm- 4 solid table feet with levelling option- Different foot variants available (standard, height-adjustable and wit ...

Inv. Num. : 7355 Type: Tetrix 352 AC/DC Producer: EMW Generated:- Parameters: Switch-on hours: 33 h Operating hours: 10 h Machine weight: 177 kg Height: 1250 mm Width: 375 mm Length: 780 mm

: neu : 2513 : Februar 2024, Zwischenver : 6998 €: 6298.2 €: 130.37 €: 3000 x 1500 mm: 850 mm: 8000 kg: 1544 kg: 200 mm: 28 mm- Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes- Hard chrome-plated table surface Cr75The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market.- Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers)- Grid lines 100 x 100 mm- 4 solid table feet withload capacity 2 ton/feet and levelling option- Different foot varian ...