WMW used machine for sale

Tool holder, milling holder, milling tool, long milling arbor -5x recordings: SK50 -3x diameter: Ø 40 x 1010 mm -1x diameter: Ø 32 x 1000 mm -1x diameter: Ø 27 x 830 mm -Sale: only complete -Weight: 109kg

diameter: 200 mm amount: 6 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Clamping drive, clamping force generator, electric WMW EDU I80 DR speed: 80 rpm torque ( adjustable in 8 steps ): 20 - 120 Nm engine: KMRB 71 K 4 E 0,55 kW 1380 rpm 220 / 380 V 3AC hollow shaft: Wedge hub profile 4 x 18 x 22 x 6 ( TGL 0-5471 ) bolt circle diameter: Ø 90 mm, 4x threaded hole M8 x 1.25 used, tested ! Dimensions: 280 x 130 x 170 mm

Shell end milling cutters, milling cutters, milling cutters, shell milling cutters -Manufacturer: WMW, shell milling cutter, shell end milling cutter type N 9960 -Size: 160x63x50mm -Receptacle: Ø 50 mm -Dimensions of box: 175/175/H100 mm -Weight: 5.9 kg

Milling head, drill head, angle head WMW Tool holder: SK40 with collet chuck size 25 360 ° rotatable in two planes shaft ( Drive , machine side ): SK50 shaft ( drive, milling head side ): Wedge hub profile 8 x 36 x 42 x 8 ( TGL 0-5472 ) flange: Ø 260 mm / 397 x 339 mm hole spacing: 365 / 175 mm 4x Bore: Ø 19 mm used, tested ! Dimensions: 400 x 390 x 600 mm

Machine vice WMW SX/1-160 TGL 34180 jaw width: 160 mm jaw height: 48 mm wingspan: 0...200 mm New ! dimensions ( machine vice ): 505 x 160 x 135 mm

Centering vice, machine vice WMW SZ 160 jaw width: 160 mm jaw height: 48 mm wingspan: 0...200 mm used, tested ! Dimensions ( machine vice ): 505 x 160 x 117 mm

Angle Milling Head, Angle Head, Milling Head, Drill Head WMW, WERKZEUGBAU DOBERSCHAU App. 252 Tool holder: MK2 1 spindle stroke: 35 mm drive plate: Ø 72 mm, 2x drive groove, width: 16 mm flange: Ø 146 / 100 mm bolt circle diameter: Ø 120 mm hole diameter: Ø 13.5 mm accessories for RUHLA milling machine used, tested ! Dimensions: 295 x 145 x 135 mm

3-jaw chuck, three-jaw chuck, lathe chuck WMW, NILES DH-W/5-160 x 3 TGL30 2332 outer Ø: 160 mm bore: Ø 42 mm speed: max. 3600 rpm centering Ø: 78,5 / 82.5 mm, depth: 17 mm ( conical ) bolt circle Ø (chuck) : 105 mm 4x threaded hole: M10 x 1.5, depth: 30 mm height with jaws: 106 mm including chuck wrench, second set of jaws and 4 mounting screws New, preserved ! dimensions ( lathe chuck ): 160 x 160 x 106 mm dimensions ( packaging ): 180 x 180 x 110 mm

4-jaw chuck, four-jaw chuck, lathe chuck WMW, NILES DH-W/5-160 x 4 TGL30 2332 outer Ø: 160 mm bore: Ø 42 mm speed: max. 2900 rpm centering Ø: 78,5 / 82.5 mm, depth: 17 mm ( conical ) bolt circle Ø (chuck) : 105 mm 4x threaded hole: M10 x 1.5, depth: 30 mm height with jaws: 106 mm including chuck wrench, second set of jaws and 4 mounting screws New, preserved ! dimensions ( lathe chuck ): 160 x 160 x 106 mm dimensions ( packaging ): 180 x 180 x 110 mm

3-jaw chuck, three-jaw chuck, lathe chuck WMW, NILES DH-W/8-250 x 3 TGL30 2332 outer Ø: 250 bore: Ø 80 mm speed: max. 2400 rpm centering Ø: 135 / 139 mm, depth: 19 mm (conical) bolt circle Ø (chuck) : 170 mm 4x threaded hole: M16 x 2.0, depth: 32 mm height with jaws: 129 mm including chuck wrench, second set of jaws and 4 mounting screws New, preserved ! dimensions ( lathe chuck ): 250 x 250 x 129 mm dimensions ( packaging ): 260 x 260 x 140 mm

tool taper: MK4 diameter of tools max.: Ø 145 mm table-size: L: 800 x B: 700 mm surface area: Ø 300 mm table travel: 200 mm total power requirement: 7,5 kW weight of the machine ca.: 4,9 t dimensions of the machine ca.: 2,8 x 1,5 x 2,3 m Additional information: Application: Gear hobbing machine for gear cutting of spur and helical gears, worm gears and rollable profiles Cycle milling and single milling as well as up-cut and climb milling Specifications for machining spur and worm gears: -Outer Ø max. 250mm with counterholder -pitch max. 5mm -Tooth helix max. 45° -Tooth width max. axial milling 200mm and radial-axial milling 240mm -Milling width max. clamping table counterholder 655mm Milling slide: -swivelling 210° -travelling distance 350mm -feed, 2 directions, 16 steps in the range 0.2 - 6.3 mm/revolution Further features: -counter-point taper MK4, co-rotating -Centre distance of  ...

Pneumatic Grinder, Pneumatic Straight Grinder WMW Type 1804 17000 rpm Grinding wheel diameter: Ø 50 mm with approx. 1.6 m Connection hose used, tested ! Dimensions: 330 x 50 x 80 mm

Heavy-duty lathe, lathe, lathe, lead and tension spindle lathe, lead and tension spindle lathe, automatic lathe -Manufacturer: WMW, automatic lathe type DRT 50m -Turning length: 550 mm -Turning Ø over bed: 530 mm -Spindle bore: Ø 63 mm -Spindle speeds: 9 - 450 rpm -Three jaw chuck: Ø 200 mm -Turret: with accessories, see photos -Drive motor: 5.3 / 6.8 kW -Dimensions: 2420/1040 / H1460 mm -Weight: 2200 kg

Quick clamping device, hydraulic clamping device, electrohydraulic clamping device, clamping drive, motorized clamping device -Manufacturer: WMW, electric clamping drive -Type: EDU I 80 -Motor: VEM 0.55kW -Shaft: Ø22/18 x 101 mm, see photo -Dimensions: 300/137/H170 mm -Weight: 16 kg

Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping table: milling machine table -Table surface: 400 x 600 mm -T grooves: groove width 14 mm, groove spacing 50 mm -rotatable. by hand with 6x fastening screws -can be tilted and swivelled: via cranks -fits for Deckel Mikron WMW and other milling machines -Total dimensions: 700/600/H345 mm -Weight: 198 kg

Machine vice, vice, drill press vice -Jaw width: 155 mm -Back height: 80 mm Clamping depth: max. 200 mm -Dimensions: mm -Weight: 35 kg

Shell cutters, shell cutters, milling cutters, shell-type milling cutters -Manufacturer: WMW, shell mill -Inside: Ø 32/14 mm -Dimension: Ø 96 x 47 mm -Weight: 1.5 kg

Tool holder, milling holder, milling tool -Number: 7x SK40 mounts with tool carrier -Executions: different -Bore chucks, flat chucks, reducing sleeves, cutter heads, shell end mills -Sale: only complete -Dimensions: 590/120/H210 mm -Weight: 12 kg

Counter holder, counter bearing, bearing block, pillow block bearing, bearing for milling machine, horizontal milling machine -Manufacturer: WMW, counter bearing from milling machine FW 400 x 1600 -Dimensions: see the drawing in the photos -Transport dimensions: 1505/400/H345 mm -Weight: 370kg

live center, live center, live morse taper, live center, live lathe center, live center -Manufacturer: WMW, live center 2 pieces -Type: ZN 205 -Intake: MK5 -Price/delivery: complete -Total dimensions: 270/190/100 mm -Weight: 10kg

Quick clamping device, hydraulic clamping device, electro-hydraulic clamping device, clamping drive, motor clamping device -Manufacturer: WMW, electrical clamping drive from milling machine FW 400 x 1600 -Type: EDU I 80 HDR EK IH -Motor: VEM 0.55 kW -Shaft: Ø 30 x 100 mm -Dimensions: 465/185 / H238 mm -Weight: 23 kg

Thread cutting head with chaser jaws, thread cutting stock, Tapping machine, pipe thread cutter -Inch thread: 1/2 - 3/4 inch -Weight: 6 kg

Cutter mandrels, tool holder, with tightening thread WMW, VWF 40 x 22 x 315 ( 40x22x315 ) SK40 tool holder: Ø 22 x 315 mm used ! Dimensions: 468 x 63 x 63 mm

Fan head, chamber ventilator, dorade ventilator, mushroom ventilator, ship ventilator, deck ventilator, ventilation, mushroom hood for ventilation, ventilation duct, ventilation flap, ventilation system, extraction system, ventilation ducts and fittings, multi-leaf damper, non-return damper, lamellar ventilator, mushroom hood -Manufacturer: WMW, fan head type MTK DN 150 GL 37081-86 HH -Bolt circle Ø 238 x 22 mm -Number: 1x hood available -Price per piece -Total dimensions: 310/200/H290 mm -Weight: 35 kg/pc.

Fan head, chamber ventilator, dorade ventilator, mushroom ventilator, ship ventilator, deck ventilator, ventilation, mushroom hood for ventilation, ventilation duct, ventilation flap, ventilation system, extraction system, ventilation ducts and fittings, multi-leaf damper, non-return damper, lamellar ventilator, mushroom hood -Manufacturer: WMW, fan head type MTK DN 80 GL 37081-86 HH -Flange: DIN 2576 ND10-NW80/88 -Bolt circle Ø 160 x 18 mm -Number: 5x hood available -Price per piece -Total dimensions: 310/200/H290 mm -Weight: 12.2 kg/pc.

Fan head, chamber ventilator, dorade ventilator, mushroom ventilator, ship ventilator, deck ventilator, ventilation, mushroom hood for ventilation, ventilation duct, ventilation flap, ventilation system, extraction system, ventilation ducts and fittings, multi-leaf damper, non-return damper, lamellar ventilator, mushroom hood -Manufacturer: WMW, fan head type MTK DN 65 GL 37081-86 HH -Flange: DIN 2576 ND10-NW65/76 -Bolt circle Ø 143 x 18 mm -Number: 2x hood available -Price per piece -Total dimensions: 280/185/H255 mm -Weight: 9 kg/pc.

Mushroom hood for ventilation, ventilation duct, ventilation flap, ventilation system, exhaust system, ventilation ducts and fittings, multi-leaf damper, non-return damper, lamellar fan, mushroom hood -Manufacturer: WMW, fan head type MTK DN 40 GL 37081-86 HH -Bolt circle Ø 110 x 18 mm -Number: 1x hood available -Price per piece -Total dimensions: 220/140/H220 mm -Weight: 5,4 kg/pc.

Fan head, chamber ventilator, dorade ventilator, mushroom ventilator, ship ventilator, deck ventilator, ventilation, mushroom hood for ventilation, ventilation duct, ventilation flap, ventilation system, extraction system, ventilation ducts and fittings, multi-leaf damper, non-return damper, lamellar ventilator, mushroom hood -Manufacturer: WMW, fan head type MTK DN 50 GL 37081-86 HH -Flange: DIN 2576 ND10-NW50/60 -Bolt circle Ø 126 x 18 mm -Number: 8x hood available -Price per piece -Total dimensions: 230/165/H225 mm -Weight: 6.5 kg/pc.

Tool holder, milling holder, milling tool -Quantity: 4x recording SK40 -1x Ø: 16 x 19 mm -1x Ø: 16 x 25 mm -1x Ø: 27 x 25 mm -1x: drill chuck - is only sold complete -Weight: 6kg