We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Westfalia Separator Type: SA14-06-076 Used
used
We are selling here a Menger from the manufacturer Stork u. Herrmann, type KM 90D in a very good used and functional condition. The machine runs on 400 volts, built in 2020, rollable, completely stainless steel, 90 litres, workshop tested, ready for immediate use, dimensions W/D/H 80/110/120 cm, others on request.
used
Transport tank Fa. Westfalia 2 pieces Jacket Cooling + Insulation + Agitator 20 HL capacity Pressure 1 bar Accessories Fittings Year of construction 2004 Further information and price on request
used
WESTFALIA MSB 60-01-076 MILK SEPARATOR CENTRIFUGE USED FOR MILK SKIMMING, WHEY SKIMMING, CREAM SEPARATION, FAT SEPARATION FEED CAPACITY: 7.000 LT/H MACHINE COMES WITH TOOLS KIT AND SOME SPARE PARTS INSTRUCTIONS BOOKS ARE AVAILABLE 2 PCS AVAILABLE IN STOCK !
used
Used Westfalia centrifuge, model SA 45. New 1993.
used
Cream separator Westfalia MSD 70.01 7000-10,000 L/H tools , base plate, controls, water system
used
- Separator WESTFALIA SAMP 150 36 - Year of construction: 1965 - Motor: 22 Kw 380/400V/50Hz - New fully automatic control: Year 2013 original Westfalia - Output: fruit juice/wine up to 10'000l/h - Max. Water output: 20000 l/h - With rotary brush sieve - Machines in very good condition, very few working hours - Overhauled machines - Separator WESTFALIA SAMP 150 36 - Year of construction: 1968 - Motor: 22 Kw 380/400V/50Hz - New fully automatic control: Year 2013 original Westfalia - Output: fruit juice/wine up to 10'000l/h - Max. Water output: 20000 l/h - With rotary brush sieve - Machines in very good condition, very few working hours! - Overhauled machines
used
WESTFALIA MSD 50-01-076 MILK & WHEY SEPARATOR APPLICATION: CREAM SEPARATION CAPACITY: 5.000 LT/H FOR MILK SKIMMING MACHINE COMES WITH TOOLS AND INSTRUCTIONS BOOK
used
Available in stock 1 x Used Westfalia Lub. Oil Separator, model OSA 20-96-066. The unit was installed in a HFO power plant that stopped operating. The equipment is used but in good working conditions. Note: We also have some original parts from GEA Westfalia to sell. If you are looking for something in particular, please contact us and we will see if we have anything in stock.
used
WESTFALIA SAMM 12006 CREAM SEPARATOR FOR MILK & WHEY CAPACITY: 12.000 LT/H COMES WITH A SPARE HYDROULIC CLUTCH
used
WESTFALIA KDA 16-02-177 QUARK & YOGHURT SEPARATOR CAPACITY: 1.000 KG/H PRODUCT SOME PARTS ARE MISSING PLEASE CONTATCT FOR MORE INFORMATION
used
PRODUCT DESCRIPTION MANUFACTURER: Westfalia TYPE: MSE 25-01-177 YEAR: 2011 CAPACITY: 2500 Lt/h MACHINE COMES WITH: Tools and instructions book.
used
MANUFACTURER: Westfalia TYPE: MSD 50-01-076 CAPACITY: 5.000 Lt/h for milk skimming & 7.000 Lt/h for whey skimming. MACHINE COMES WITH: Tools and instructions book
used
Operating room Milk heating / separation with two separators á 25,000L/h total output of the plant 50,000L/h The plant consists of two skimmed milk pasteurizers á 25,000L/h capacity and a common cream pasteurizer 1. Gea Ahlborn 25.000L PWT YOC 1992 (skimmed milk) 2. Gea Ahlborn 25.000L PWT YOC 1989 (skimmed milk) 3. AlfaLaval 4.700L PWT YOC 1989 ( Rahm ) 4. Westfalia 25.000L YOC 1979 ( Separator) MSA 5. Westfalia 25.000L YOC 1976 ( Separator) MSA 6. Fristam/ Hilge pumps different years of construction all maintained 7. Gea Tuchenhagen YOC 2007 (Vorlaufbebälter) 8. Control S7 (program possibly an excerpt since central control from the group) The system is serviced annually every second year a major maintenance every 4 years all seals replaced by the system Tools and description included, Spare parts available by arrangement.
used
Separator WESTFALIA Type SB60-06-076 for beer, fruit juices, wine, vegetable juices, tea, coffee, citrus and tropical fruits for Pectin Capacity: 300-13.000l per hour with 4.800 rotations/min Measurements and Weight: Height: 2500 mm Length: 2000 mm Width: 1800 mm Weight: 2350 kg Technical specifications: Manufacturer: Westfalia Type: SB60-06-076 Year of construction: 1973 Serial number: 1668 021 Ø dl. 568 mm Drum speed: 4800 rpm Permissible density of the material to be centrifuged: Heavy liquid: 1.0 kg / dm3 Solid: 1.45 kg / dm Test books, tools, drawings available!
used
-System: Used Westfalia Separator as semi-mobile dewatering unit Manufacturer: Westfalia Model: full coat screw centrifuge Design: as a semi-mobile dewatering unit Type: CF 7000 / UCF 646-00-35 Power: 110 kW Year of construction: 2012 Screw drive: 30 kW, IP54, 50 Hz -Accessories: inlet pipe for the feeding of sludge -Decanter connectors: solids discharge chute 1.4301, Central chute, including sample tap 1.4301 -Sludge feeding: rotary piston pump Börger CL520 Flow rate: 50-120 m3/h Power: 11 kW -Mud meter: ABB, COPA XE, DN 100 -Solvents - and dosing station: fully automatically to the release of liquid products Designed for a dose of: 35 kg FHM/h Make: P + P -Eccentric screw pump: to promote the use solution over the subsequent dilution station to the decanter Make: Netzsch, 2-8 m3/h Power: 1.5 kW FU: included in the control -After dilution station: to the Hrabsetzun ...
used
System: Used Westfalia Separator as semi-mobile dewatering unit Manufacturer: Westfalia Model: full coat screw centrifuge Design: as a semi-mobile dewatering unit Type: UCF 646-00-35 Power: 110 kW Screw drive: 30 kW, IP54, 50 Hz -Accessories: inlet pipe for the feeding of sludge -Decanter connectors: solids discharge chute 1.4301, Central chute, including sample tap 1.4301 -Sludge feeding: rotary piston pump Börger CL520 Flow rate: 50-120 m3/h Power: 11 kW -Mud meter: ABB, COPA XE, DN 100 -Solvents - and dosing station: fully automatically to the release of liquid products Designed for a dose of: 35 kg FHM/h Make: P + P -Eccentric screw pump: to promote the use solution over the subsequent dilution station to the decanter Make: Netzsch, 2-8 m3/h Power: 1.5 kW FU: included in the control -After dilution station: to the Hrabsetzung of the root solution to power consump ...
used
Capacity: 10.000 l / h Engine: 37 KW Dimensions: 600 mm / 1200 mm / 1500 mm (L / B / H) Weight: 1.300 kg Country of origin: Germany
used
Used laboratory centrifuge made by Westfalia, model BKA25-86-576, new 1977
used
Capacity: 8000 l / h Dimensions: 500 mm / 1000 mm / 1200 mm (L / W / H) Weight: 800 kg Country of origin: Germany
used
Capacity: 5.000 l / h Dimensions: 500 mm / 1000 mm / 1200 mm (L / W / H) Weight: 800 kg Country of origin: Germany
used
Westfalia MSA 20-06-076 Milch/Molke Reiniger. Kapazität 10000 l/st, Selbstentleerend. Inklusive Grundrahmen, Steuerung, Werkzeuge und unterlagen. Vollig Uberholt und auf edelstahl Rahhmen zusammen gebaut. betriebsbereit.
used
Westfalia MSA 20-06-076 milk/whey clarifyer. capacity 10000 l/hr, selfcleaning. including baseplate, tools, controlls and manual. Fully overhauled, build on stainlesssteel SKID.
used
WESTFALIA MZA 10 dynamischer Inlinemixer, Kapazität abhängig vom Produkt.
used
WESTFALIA MZA 10 inline dynamic mixer, capacity depending on product.
used
Cat. no. 08-1535F in very good condition self-supporting complete with tools, electrical control for beer,wine,fruit juice Gearbox horizontal Drum speed: 4800 rpm Swallowing capacity: 20,000 Ltr/h Dimensions and weight: Height: 190 cm Length: 170 cm Width/depth: 140 cm Weight approx. 2 ton For further information call: 09353 90905-0 or fax: 09353 90905-22 Mobile: 0171 651 82 48 All prices are ex works plus VAT, from stock. Intermediate sale reserved. Sightseeing is also possible in the evening or on weekends by appointment.
used
Output: 20-25,000l/h, motor power: 45kW, including documentation, tools and spare parts, was maintained regularly.
used
Output: 25,000/ 30,000l/h, drum rotational speed: 5900/min, capacity: 25l, weight: 1.84t, including spare parts and documentation, without control cabinet.
used
There are two machines available (1) Pasteuriser Bertsch, output: 8500l/h, controls: Siemens S7 (2) Centrifuge Westfalia, output: 8500l/h, with sieve, the documentation is available.
used
Description: - hand lift cylinder with different inserts - one hydraulic cylinder pressing force: 10 to - one hydraulic cylinder pressing force: 0.5 to - with extensions Approx. Onsite Dimension. (l x w x h): 660 x 350 x 160 mm, weight approx.: 20 kg