WEILER used machine for sale

Type: E 30 Parameters: Manufacturer: Weiler Year of production / SO / GO: 2018 / - / - Description: Lathe in good technical condition, after agreement the possibility of testing. Maximum turning length (Z axis) 750 mm. Turning diameter above the bed (max) 330 mm. Maximum rotation speed of the main spindle 4500 1 / min. Total power consumption 15 kW. Lathe weight 1.7 t.

This WEILER DZ 42 lathe was made in 1998 in Germany and has 1009 hours. It is equipped with a Siemens 840D control unit. The machine has a spindle speed of 6000 - 8000 rpm.

turning diameter over bed: 380 mm turning diameter over slide rest: 0 mm turning length: 950 mm centre distance: 1000 mm centre height: 180 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 300 mm turning diameter over slide rest: 150 mm turning length: 800 mm spindle bore: 36 mm turning speed range: 42 - 2000 U/min feeds: 0,011 - 0,91 mm/U tailstock quill taper MT: 3 total power requirement: 2,2 kW weight of the machine ca.: 0,75 t dimensions of the machine ca.: 1,7 x 0,8 x 2,0 m Machine had been active in the school centre very little used! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

centre distance: 2000 mm : 555 mm control: S 3 Weiler : 2 chuck: . mm multifix: . weight of the machine ca.: 4 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Ref. -No.: 10367 Manufacturer: WEILER Year of construction: 1996 Type of control: CNC Control: Siemens Storage location: Halberstadt Country of origin: Germany Turning Speeds: 500 RPM Machine length: 7000 mm Machine width: 2300 mm Machine Height: 2600 mm Weight Of The Machine Ca.: 9,25 t Spindle Taper: 6 Mk Travel quill: 300 mm Bed width: 800 mm Turning Length: 3000 mm Turning Diameter Over Bed: 900 mm Swing Diameter Over Bed Slide: 530 mm Spindle Bore: 254 mm Spindle power: 45 kW Tailstock - Insertione Into The Sleeve: 140 Ø Max. Workpiece Weight: 5000 kg Further information: Machine can be inspected under power.

Control: Manufacture: WEILER turning dia. over bed: 330 mm centre height: 165 mm centre distance: 770 mm turning dia. over face-slide: 160 mm spindle bore: 42 mm spindle taper: 55027/5 spindle turning speed - stepless: 1-4500 U/min tailstock quill taper MT: 3 dia. of quill: 50 mm quill stroke: 110 mm feed - longitudinal/cross: 0.001-20 mm/min rapid traverse longitudinal: 10 m/min rapid traverse cross: 5 m/min spindle drive: 9/11 kW dimensions of the machine ca.: 1800x1200x1700 mmxmmxmm weight: 1300 kg 3-jaw-chuck diameter: 160 mm make: FORKKARDT quick change tool holder:: MULTIFIX type: B numbers of toolholders: 6 coolant: misc. accessories: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

control: WEILER turning diameter over bed: 410 mm centre height: 200 mm centre distance: 1000 mm turning dia. over face-slide: 200 mm spindle bore: 54 mm spindle taper ISO: 55027/6 spindle turning speed - stepless: 4-3000 U/min tailstock quill taper MT: 4 diameter of quill: 65 mm quill stroke: 120 mm feed - longitudinal/cross: 0-20 mm/min rapid traverse longitudinal and cross: 10/5 m/min spindle drive: 9/13 kW dimensions of machine: 2300x1200x1800 mm weight: 2.0 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning length: 1000 mm turning diameter over bed: 380 mm turning diameter over slide rest: 190 mm number of spindle speeds: 25 - 2000 U/min. turning speeds: 18 Stk. spindle bore: Ø 56,0 mm tailstock quill taper MT: DIN 228 / MK 4 quill stroke: 150 mm bed width: 310 mm spindle taper: DIN 55027 / 6 feeds - longitudinal: 0,022 - 0,8 mm/U feeds - cross: 0,011 - 0,4 mm/U thread: M 0,3 - 10,0 mm voltage: 380 V total power requirement: 7,5 kW weight of the machine ca.: 1600 kg range L-W-H: 2320 x 1400 x 1600 mm Machine from a workshop for the disabled Lathe with precision ground and induction hardened bed. Very suitable e.g. for use in workshops and training centres. Furnishing: - Robust main lathe and spindle lathe with VARIO gear - 2 axis HEIDENHAIN digital display, front left - FORKARDT 3-jaw chuck Ø 200 mm, with spare jaws & chuck key - foldable lathe chuck protection - MULTIFIX steel h ...

turning diameter over bed: 330 mm turning diameter over slide rest: 170 mm turning length: 800 mm centre height: 155 mm centre distance: 800 mm spindle bore: 38 mm spindle turning speed range: 24 - 2800 U/min spindle head: DIN 55022 Gr. 5 feeds - longitudinal: 0,026 - 1,253 mm/U feeds - cross: 0,013 - 0,628 mm/U dia. of leadscrew: 24 mm lead of leadscrew: 6 mm tailstock taper MT: 3 tailstock quill stroke: 110 mm total power requirement: 3 kW weight of the machine ca.: 800 kg dimensions of machine L x W x H: 1,80 x 0,70 x 1,23 m Accessories: 3-jaw chuck RÖHM 160 mmø, changing tool post PARAT, solid steady, running center, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 280 mm turning diameter over slide rest: 158 mm turning length: 650 mm turning speed range: 96 - 2500 U/min feeds - longitudinal: 0,02 - 0,63 mm/U feeds - cross: 0,32 x Längsvorschub mm/U 3-jaw-chuck diameter: max.165 mm total power requirement: ca. 2 kW 88140984 380 V - 50 Hz colour: green accessories: set of collets (59 units), multifix tool holder Size A with 6 inlets, 1 punch point - revolving, 2 punch points - fix, 1 boring chuck, 1 turning heart, 1 chuck for three jaws, 1 chuck for four jaws, 5 set of jaws. The machine was equipped afterwards with a 3-axis digital monitoring from RSF in our workshop. #The machine is in a condition as new# The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Turning diameter: 570 mm Turning length: 1000 mm Turret positions: 1 CNC Brand: Siemens CNC Model: SIEMENS 810D Swing over bed Ø 570 mm Swing over cross slide Ø 340 mm DBC Turning Length 1000 mm Bed width 350 mm Tailstock spindle Ø 80 Ø Spindle taper 5 Mk Workpiece weight 1300 Speeds / ranges 2500 Rpm Feed rate X-Axis 10000 mm/min. Feed rate Z-Axis 5000 mm/min.

Turning diameter: 720 mm Turning length: 1000 mm Turret positions: 1 CNC Brand: Siemens CNC Model: SIEMENS 810D Schunk Rotojet 500 mm Parat tool holder Chip conveyor Coolant system Swing over bed Ø:        720mm Swing over cross slide Ø:430mm DBC Turning Length:      1000mm Spindle bore:            106mm Spindle power:           37kW Bed width:               480mm Tailstock spindle Ø:     115Ø Stroke pinole:           6mm Workpiece weight:        3400 Speeds / ranges:         1800Rpm Feed rate X-Axis:        5000mm/min. Feed rate Z-Axis:        10000mm/min. Length:          &nbs ...

centre height: 165 mm centre distance: 750 mm spindle bore: 40 mm tailstock taper MT: 3 weight of the machine ca.: 1150 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

centre height: 165 mm centre distance: 750 mm spindle bore: 40 mm tailstock taper MT: 3 weight of the machine ca.: 1150 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 300 mm turning diameter over slide rest: 150 mm turning length: 800 mm spindle bore: mm turning speed range: 42 - 2000 U/min feeds: 0,011 - 0,91 mm/U tailstock quill taper MT: 3 total power requirement: 2,2 kW weight of the machine ca.: 0,75 t dimensions of the machine ca.: 1,7 x 0,8 x 2,0 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 280 mm turning diameter over slide rest: 155 mm turning diameter in the gap: 350 mm turning length: 800 mm turning speeds: 26 - 2000 U/min spindle bore: 24 mm connected load: 1,6 kW weight of the machine ca.: 0,7 t dimensions: 1,55 x 0,8 x 1,3 m Center lathe with - digital display - 4-jaw chuck Röhm 250mm - Multifix steel holder - follow along. Bezel - steady rest max. 135mm - Chip protection wall - Chip tray - coolant system - machine light The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 330 mm turning diameter over slide rest: 170 mm turning length: 800 mm spindle bore: 38 mm tailstock quill taper MT: 3 spindle turning speed - stepless: 24 - 2800 U/min linear traverse of table: 0,026 - 1,253 mm feeds crossrail-slide horizontal: 0,013 - 0,628 mm/U quill stroke: 120 mm total power requirement: 2,4 / 3,0 kW weight of the machine ca.: 850 kg dimensions of the machine ca.: 1,85 x 0,8 x 1,7 m 3-jaw chuck: Qick Toolholders: Machine Lamp: chip protection wall: Lining protection hood: Coolant System: The machine comes from a training company and was maintained more than needed. The general condition is very good, all functions have been checked. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Turning diameter: 900 mm Turning length: 4500 mm Turret positions: 0 CNC Brand: Siemens CNC Model: Siemens Sinumrik Front and Rear chuck 885 mm Multi fix tool system Max. turning Ø:900mm X-Axis:        590mm Z-Axis:        4500mm Spindle bore:  355mm Speedrange:    500Rpm Spindle power: 45kW Pinole taper:  6Mk Stroke pinole: 300mm Quill Ø:       140mm Length:        6900mm Width:         2600mm Height:        2200mm Weight:        10500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitut ...

Mechanic lathe Fabr. WEILER Type MDU 260 pGFabr.Nr. 4420, built in 1957for chip removal with manual feed, easier for one-off productionTurned parts in the pliers, in the lining or between the tipsCenter height: 125 mmTip width: 500 mmTurning diameter over support: 140 mmSpindle bore: 28 mmMax. Zangendurchlaß: 22 mmMax. Pliers bore, not continuous: 25 mmFeed travel cross slide: 100 mmFeed path for cross slide: 95 mm16 speeds: 110 - 3600 rpm.2-speed motor pole reversible: 750/3000 rpm, 0.45 / 1.0 hpExternal dimensions: 1300 x 550 x 1200 mm highWith:- Collet chuck with 1 collet- Hand lever support for longitudinal pull- motorized suit- High-speed cutterhead- Drum stops- Thread turning deviceused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleas ...

Turret Lathe Fabr. WEILER Type RDU 260/38Machine -No: 1554Center height: 125 mmSpindle bore: 38 mm14 spindle speeds: 110 - 3600 rpm.Commute d. Revolver slide: 100 mmTurret: with 6 toolsDrive power: 0.5 / 1.2 hpExternal dimensions: 1400 x 600 x 1170 mmWith- integrated collet device andCollet set- Parting support- Revolver stick- 2 quick-change steel holders m. different.insertsused, from operating resolutionin good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Mechanic Lathe Fabr. WEILER Type MDU WMachine -No: 12401 Year 1971Center height: 125 mmMax. Circumference diameter over bed: 260 mmMax. Circumferential diameter over slide: 140 mmMax. Tip width: 500 mmSpindle bore: 28 mmSpindle speeds: 160-1800 rpm.Drive power: 1.1-1.2 kWWeight: 400 kgOutside dimensions: 1300 x 600 x 1200 mmWith- Cranksupport- Collet device with draw tube and colletsused, from operational resolutionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Turret lathe make WEILER type RDU 260/38Fabr. -No: 12304/442 Year 1971Center height 125 mmSpindle bore 38 mmTurning diameter over bed 260 mmmax. tip distance 500 mmBed length 1020 mm16 spindle speeds 125 - 2800 rpm.Drive power 0.5 / 1.2 hpDimensions L x W x H approx.: 1400 x 700 x 1400 mmWith- built-in electr. Collet chuck- collet set- Parting supportused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Prec. Revolving Lathe (Post-Lathe) make WEILER type RDU 38Masch. -No: 2371/1287 built in 1973Center height: 125 mmMax. Circumference diameter over bed: 260 mmMax. Circumferential diameter over cut-off carriage: 125 mmTop width: 380 mmSpindle passage: 38 mmSpindle mount: DIN 800 A12 spindle speeds: 125-2800 rpm.Drive power: 0.9 kWDimensions L x W x H: 1300 x 600 x 1200 mmWeight approx: 400 kgWith- Collet device- Parting support- 6-fold revolver tailstock- additionally flanged collet chuck Nannxa0xa0 with 16 collets up to 35 mm diameterused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Production lathe Fabr. WEILER type MF 220Top height: 100 mmTurning diameter over bed: 220 mmTurning diameter over cross slide: 120 mmTip width: 450 mmSpindle bore: 23 mm12 spindle speeds: 125 - 2800 rpmExternal dimensions length x width x height: 1080 x 450 x 1180 mmWeight approx: 225 kgWith- ColletsusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Mechanic lathe make WEILER type Primus MD / GMachine -No: 2728-1Technical specifications:Distance between centers: 430 mmCenter height: 120 mmTurning diameter over bed: 195 mmTurning diameter over cross slide: 135 mmCircumferential diameter over bed: 250 mmBed width: 155 mm18 spindle speeds: 60 - 3000 rpm.Spindle bore: 23 mmDrive power: 1.2 / 1.5 kWDimensions: 1200 x 650 x 1330 mmWeight: 340 kgwith- three-jaw chuck- Multifix steel holderused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Mechanic lathe make WEILER type Primus MD / GMachine -No: 2729-1Technical specifications:Distance between centers: 430 mmCenter height: 120 mmTurning diameter over bed: 195 mmTurning diameter over cross slide: 135 mmCircumferential diameter over bed: 250 mmBed width: 155 mm18 spindle speeds: 60 - 3000 rpm.Spindle bore: 23 mmDrive power: 1.2 / 1.5 kWDimensions: 1200 x 650 x 1330 mmWeight: 340 kgwith- three-jaw chuck- Multifix steel holderused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Metal Lathe Fabr. WEILER Type Condor VSMasch. -No: 9127 built in 1979 with preselectionCenter height: 155 mmTip width: 800 mmGr. circulation diameter over bed: 320 mmxa0xa0xa0 via support slide: 170 mmSpindle bore: 38 mmMounting taper of the tailstock quill: MK 317 spindle speeds: 12 - 2800 rpm.60 feeds along: 0,037 - 1,253 mmxa0xa0xa0 plan: 1/2 of the longitudinal feeds35 metric thread pitches: 0.35 - 12 mm40 inch thread: 45 - 2 Gg / 25 module thread: 0.2 - 4 module32 diametrical pitch threads: 5 - 90 DPDrive motor: 380 V, approx. 3 kWDimensions L x W x H: 700 x 1830 x 1260 mmWeight approx: 815 kgWith- compl. electrical device- Lighting- Coolant device- Quick change tool holder Multifix m. morexa0xa0 steel holders- Three - jaw chuck Forkhardt 200 mm Drm.- Tool cabinet with contentused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net a ...