TOS used machine for sale

Hmotnost stroje: 3000 kg Celkový příkon stroje:: 4 kW Max. průměr broušení: 280 mm Vzdálenost hrotů: 630 mm Max. hmotnost obrobku: 60 kg

The machine is in good technical condition, after prior agreement the possibility of testing. Longitudinal table movement - axis x 1000 mm Transverse table movement - z axis 320 mm Vertical table movement - y axis 350 mm Grinding spindle speed 2280, 2600 rpm Max. workpiece weight 280 kg machine weight 3200 kg

Type: BUA 31/1000 Parameters: 310 mm, 1000 mm Manufacturer: Tos Description: Surface grinding machine. Max. workpiece diameter: 315mm Max. tip distance: 1000mm. Machine in good technical condition.

Hmotnost stroje: 3200 kg Celkový příkon stroje:: 6,2 kW Upínací plocha stolu: 320 x 1000 mm Otáčky brousícího vřetena: 2280 , 2600 ot/min Max. hmotnost obrobku: 280 kg

Table size: 630 x 200 mm. Table load capacity: 200 kg. The machine is in good technical condition, currently disconnected.

Name of the machine BRUSKA HROTOVÁ Manufacturer TOS Hostivař Machine type BUC 63 A / 4000 Year of manufacture Basic parameters 630 mm; 4000 mm

The machine is in good technical condition, it is possible to test it by agreement. Max. grinding diameter: 280 mm Max. grinding length: 630 mm Max. workpiece weight: 65 kg Longitudinal feed: 760 mm Power of the main electric motor: 4 kW Dimensions lxw: 2800x1600 mm Machine weight: 2250 kg. cooling, magnetic separator, dresser holder in tailpiece, 2 x flange with disc, balance mandrel, closed and open bezels are from another machine and must be adapted, internal grinding with fortune, mandrels for internal grinding, protective covers against cooling emulsion, replaced hydraulic oil, hydraulic circuit fully functional without oil leakage, mechanical condition very good, no play on the working headstock, the distributor is outside the machine.

Name of the machine BRUSKA HROTOVÁ Manufacturer TOS Hostivař Machine type BUB 32/1000 Year of production 1988 Basic parameters 320mm, 1000mm

The machine is in good technical condition, after prior agreement the possibility of testing. Max. grinding length 1,000 mm Max. height of ground object with new discs (from the table) 350 mm Longitudinal table movement 1,060 mm Transverse table movement 350 mm Vertical movement of the grinding headstock 400 mm Distance of the spindle axis from the table clamping surface min. 75 mm, max. 475 mm Vertical cutting feed - 1 scale division 0.001 mm Grinding wheel (ø x width x hole ø) 250 x 25 x 76 mm Grinding wheel speed ø 250 mm 2,522 min-1 Partially worn grinding wheel speed 3 319 min-1 Grinding headstock motor power 3 kW Machine dimensions Machine floor area approx. 4,100 x 2,000 mm Machine height 2,125 mm Machine weight 3,400 kg Electrical equipment Total machine power 9.3 kVA Accessories Magnetic clamping plate 300 x 1,000 mm , height 100 mm

Location: Czech Republic Description: Working spindle diameter 100 mm X-axis travel 1250 mm Travel of the Y axis 1100 mm Spindle speed 10 - 1200 /min. Central cooling does not Spindle extension (W) 630 mm Z axis travel 970 mm The toolbox does not Spindle clamping cone ISO 50. Power of the main electric motor 22 kW Table clamping surface 1000 x 1120 mm Max. workpiece weight 3000 kg Dimensions L x W x H 4746 x 3000 x 3340 mm Machine weight 13700 kg

The machine is in good technical condition. Working spindle diameter: 90mm Transverse table adjustment: 1120mm. After agreement, the possibility of testing. Accessories: digital measuring, angles.

Machine weight: 38000 kg Working spindle diameter: 130 mm Spindle taper: ISO 50 Spindle speed: 1800 rpm Table clamping surface: 1800 x 1600 mm Transverse table movement - x axis: 3500 mm Longitudinal table movement - z axis: 2000 mm Vertical table movement - y axis: 2500 mm

Clamping surface of the table: 2500x1800 mm Longitudinal movement of the table - x-axis: 3000 mm Transverse table movement - y axis: 1800 mm Vertical movement of the table - z axis: 1600 mm Spindle speed: 6000 rpm Chip conveyor:: Yes Internal cooling: : Yes Number of spindles:: 1

Double shaft multisaw TOS SVITAVY PWR 402 440/200 – year of manufacture 2005 – technical documentation – Czech production track width 440 mm cutting height 55 mm - 200 mm disc diameter 350 mm main engines 2 x 55 kW feed motor 3 kW feed speed adjustable on a gear motor five upper pressure rollers lower auxiliary roller five rows of pawls electric cutting height adjustment electric shaft height adjustment automatic central lubrication shaft diameter 60 mm wedge 18 mm sleeve diameter 80 mm wedge 13 mm sleeve length 43 cm spigot diameter 200 mm transport dimensions (length / width / height) 280 / 245 / 230 cm weight 4770 kg Multisaws are machines used in the wood industry mainly for cutting prisms, but not only. Machines of this type can cut boards into smaller elements and cut lamellas. The principle of their operation is very simple, the machine has a spindle ...

This TOS Optima Horizontal Machining center was manufactured in the year 2005 in Czech Republic and has 83171 production hours, of which 36511 are spindle hours. It is equipped with a HEIDENHAIN iTNC 530 control unit and has 4 axis. The machine has a spindle speed of 6000 rpm.

Tos SUI-50 Ø 500 x 1500 mm Distance between centers: 1500 mm Swing over bed: 500 mm Swing over cross-slide: 320 mm Swing in gap: 560 mm Diametre of main spindle bore: 55 mm Power on main spindle: 7,5 kW Number of speeds: 14 > 2240 rpm Length: 2900 mm Width : 1280 mm Height: 1450 mm Weight: 3 ton Steady(s) (fixed): 1x

Three-jaw chuck, three-jaw lathe chuck, scroll chuck -Manufacturer: TOS, three-jaw chuck Chuck size Ø 80 mm -Passage: Ø 16 mm -Bolt circle: Ø 70 mm -Weight: 1.2 kg

x-travel: 600 mm y-travel: 400 mm z-travel: 400 mm spindle taper ISO: 40 quill stroke: 100 mm spindle turning speed range: 40 - 2000 U/min voltage: 380 V Table dimensions: 800 x 400 mm weight: 1,9 t total power requirement: 3,0 kW dimensions of the machine ca.: 1,90 x 1,80 x 1,90 m digital readout, 3-axis: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

BHB 40 CNC cylindrical grinding machine Control: Marposs Servo motors: Indramat Producer: Czech Republic TOS The machine is new, it has never been used. You need to upload a program to the grinder or use a new control. The machine was started 7 years ago and after uploading a simple program, everything starts. There is everything for the machine tool, starting from a complete set of covers, through control cabinets, hydraulic systems, and manuals. Machine stored, not connected. Technical specifications: - distance between centers: 1000 mm - grinding diameter: 400 mm - wheel dimensions: 750 mm x 100 mm x 305 mm - maximum workpiece weight: 500 kg - cone: MK 5 - weight: about 10 tons

x-travel: 600 mm y-travel: 400 mm z-travel: 400 mm table-size: 800x400 mm quill stroke: ca. 100 mm turning speed - milling spindle: 40-2000 U/min feed range: X, Y: 8-400 mm/min feed range: Z: 4-200 mm/min rapid travel - x-direction: 2000 mm/min rapid travel in y-direction: 2000 mm/min rapid traverse cross: 1000 mm/min vertical head swivelling: +/- 90 Grad weight of the machine ca.: 2 t dimensions of the machine ca.: 2,1x1,7x1,7 m Universal milling machine with DRO for 3 axis, sviweable vertical milling head and horizontal milling spindle. -incl. knee and milling 3 arbors for milling discs -incl. 9 tool holder ISO 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tos FA3AV X: 890 - Y: 275 - Z: 400mm Max longitudinal travel X-axe: 890 mm Max cross-travel Y-axe: 275 mm Max travel Z-axe: 400 mm Power on spindle: 4 kW Type of millinghead: ISO 40 Spindlespeeds: 45 - 2800 rpm Table size: 1375 x 300 mm Length: 1900 mm Depth : 1900 mm Height: 1950 mm Weight: 1950 kg ACCESSORIES & TOOLING: yes

spindle diameter: 130 mm x-travel: 3500 mm y-travel: 2500 mm z-travel: 1250 mm work spindle diameter: ISO50 mm spindle turning speed range: 10-2500 U/min Control: TNC 430 Heidenhain total power requirement: kW weight of the machine ca.: ca. 38 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 130 mm x-travel: 3500 mm y-travel: 2000 mm z-axis: 1250 mm w-axis: 800 mm b-axis: 360 ° output: 85 KVA table-size: 1800x1800 mm table load: 12 t spindle taper ISO: 50 table rotation: 360x0,0001 ° spindle motor: 37 kW spindle turning speed range: 1500 U/min feed range: 4-8000 mm/min electrics - voltage/frequency: 400 / 50 V/Hz weight of the machine ca.: 35 t dimensions of the machine ca.: 7x7x6 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Universal milling head, milling adapter, milling extension, angled milling head, universal milling angled head, milling angled head -Manufacturer: TOS, universal milling angle head from milling machine TOS FB25-V -Recording output: SK50 -Recording: input gear -Milling head: completely swiveling -Stroke: 55 mm -Rezes recording: mm -Pitch circle: mm -Transport dimensions: 780/490 / H430 mm -Weight: 224 kg

Tailstock, counter bearing for dividing head, dividing attachment -Tip height: 135 mm -Recording: MK2 -Drawing with the photos -Price: per piece -Number: 2 pieces -Dimensions: 200/75/H145 mm -Weight: 5 kg

Tailstock counter bearing for dividing head, dividing attachment -Tip height: 95-115 mm -Recording: MK2 -Dimensions: 180/100/H110 mm -Weight: 4 kg

Tailstock counter bearing for dividing head, dividing attachment -Tip height: 120 mm -Dimensions: 230/130/H150 mm -Weight: 10 kg

Moving steady rest, moving steady rest, steady rest, lynette -Max. Passage: Ø 200 mm -Plating: brass -Tip height: 230 mm -Drawings with the photos -Price: per piece -Number: 1x available -Dimensions: 530/200/H740 mm -Weight: 100 kg

Copy head, copy head, copy device, copy lathe -heavy copy head for: lathe -without: hydraulic unit -Guide rails: 2 -and additional equipment -Dimensions: 1100/170/H370 mm -Weight: 143 kg

Collet chuck sleeves, collet chuck, tool holder, tool holder, milling holder, milling tool, clamping sleeves -Number: 31 pieces adapter sleeves -for: TOS high-speed milling head -different sizes: 1-16 mm in 0.5 mm steps -Drawing with the pictures -Sale: only as a package -Weight: 5.3 kg