We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
Model
(Manufacturer: STANKO)
used
Max. diameter of initial blank: 30 mm Blank length: -Min.: 120 mm -Max.: 300 mm Max. diameter of upset flange: 60 mm Upset slide nominal force: 2500 kN Max. force on clamping slide with dies closed: 2500 kN Stroke: -Movable die: 100 mm -Upset slide (full): 220 mm -Die closing: 140 mm Slide strokes per minute: 45 Machine overall dimensions: -Length: 6050 mm -Width: 4600 mm -Height: 2260 mm Machine weight: 24680 kg
used
Max wheel diameter 800 mm Module + 10 Max. spindle speed 310 rpm Max. gear width 350 mm Motor power 7.5 kw Dimensions 2550 mm × 1510 mm × 2000 mm Weight 7,2 ton.
used
Single column - eccentric press, STANKO, K 1430 A - 100t BJ. 1985 Tech. Condition very good, - pressure: 100 t -Projection: 320 mm -Stroke: 10-130 mm -Mounting height: 400 mm -Table size: 850 x 560 mm x 100 mm -Tappet adjustment: 100 mm -Stroke: 50-53 / per min. -Machine weight: 8800 kg -Dimensions (W x D x H): 1.60 x 1.85 x 2.9 m Camshaft gear ROSS/Herion Herion valve Auxiliary brake DESCH Lutex ZB 200 Two hand release -transverse eccentric shaft and pneumatically actuated clutch / brake Komi nation -suitable for inlays in two-hand operation -secure setting -Single stroke, continuous stroke MOT testing in 04/2016
used
Cold stamping press Stanko P 0443 Capacity, tons: 2000 Nominal liquid pressure, kg/cm²: 320 Table size, mm: 1000 x 1000 Table stroke, mm: 500 Table speed, mm/s: 0,14 Rapid table speed, mm/s: 3,1 Distance between columns, mm: 1090 Shut height, mm: 800 Hydraulic drive motor, kW: 5,5 Voltage, V: 380 Frequency, Hz: 50 Press dimensions, mm: 2575 x 1500 x 3285 Press weight, kg: 27000 Price 21500 EUR
used
Max mass of drop parts 150 kgs. Price 3400 EUR
used
Table Type Boring Machine STANKO Model: 2A620 Technical Details: Spindle diameter: 90 mm Planning shield diameter: 630 mm Table working area: 1120 mm x 1250 mm Max table travel: Longitudinal: 1000 mm Transverse: 1250 mm Max headstock vertical travel: 1000 mm Spindle travel: 710 mm Spinle taper: 7: 24 Number of spindle speeds: 23 Main motor power: 10 kW Machine dimensions: Length: 6770 mm Width: 3900 mm Height: 3100 mm Net weight: 16000 T
used
rotary table dia.:400 mm weight of the machine ca.:130 kg dimensions of the machine ca.:500 x 600 x 160 mm
used
faceplate diameter:400 mm weight of the machine ca.:60 kg
used
x-travel:630 mm y-travel:200 mm z-travel:360 mm total power requirement:7,5 kW weight of the machine ca.:2,5 t dimensions of the machine ca.:1500 x 1800 x 1900 mm spindle taper:SK40 table-size:250 x 1100 mm
used
Size of clamping surface: 630 x 250 mm, Travel distance: 400 x 320 mm, Z 400 mm, Tool holder: SK 40, Feed: infinitely variable 10 to 1000 mm/min, Tool Clamping: Hydraulic, Digital display Heidenhain, Total power: 8 KW, Machine feet included
used
-Flood damage machine, -mechanically still used a year later, -Main motor defective, geometrically fine, -little used, electrics in order, -Stanko Carousel DM (Wolf, Solventum) Attention! This machine has already been dismantled and is in storage.
used
arm length: 1600 mm taper MK: 5 serial number: 14442 weight of the machine ca.: 4,5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
sheet width: 2050 mm plate thickness: 8 mm distance between columns: mm electrical: . weight of the machine ca.: 6,3 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Stanko 800 mm Surface Grinding Machine Machine is made in 1984 but it has been renewed in 2022. -There is a ball screw in both axes. It has a movement sensitivity of -0.001 micron. -Automatic transition program available. -The whole system is new. -All engines are new. -7018 bearings are used in the stone shaft, 4 at the front and 2 at the rear. -Magnetic mirror can move at -3 and +3 degrees. -It has magnetic pickup feature. -Everything is new except the die-cast body. -Stone diameter 500 mm. -Maximum work height 300 mm. -15 KW Spindle motor. -7.5 KW mirror motor. -2x1.5 KW servo motors. Machine is in excellent condition
used
The machine is in good technical condition. Circulating diameter above the bed:: 400 mm Max. turning length: 570 mm Max. turning diameter above the bed: 400 mm Max. rotating diameter above the support: 220 mm Spindle bore: 52 mm Minimum spindle rotation speed: 9 1/min Maximum spindle rotation speed: 1600 1/min Total power: 7.6 kW Dimensions LxWxH: 221 x 1020 x 1350mm Weight: 2800 kg Accessories see photo By prior arrangement, the possibility of a tour in progress.
used
Hmotnost stroje: 32750 kg Celkový příkon stroje:: 42 kW Max. průměr broušení: 700 mm Vzdálenost hrotů: 4000 mm Max. hmotnost obrobku: 3000 kg
used
Rotary table STANKO 720440023 Ø 400 mm table height: 160 mm used, tested ! Dimensions: 500 x 600 x 160 mm
used
Clamping bracket STANKO clamping surface: 400 x 400 x 64 mm bridge width: 30 / 88 / 90 / 87 / 33 mm Groove width: 18 / 32 mm Groove depth: 35 mm Mounting surface: 400 x 270 x 35 mm 2x slotted hole: Ø 20, Length: 120 mm used, tested ! 85 KG (heavy duty) Dimensions: 400 x 400 x 270 mm
used
grinding diameter: 630 mm grinding length: 4000 mm centre height: / mm weight of the machine ca.: 32000 kg Discover precision machining with the STANKO 3M194, equipped with a spacious grinding area of 630 x 4000 mm. Weighing at 32,000 KG, this robust machine ensures stability and reliability in your machining processes. Classified under HS-Code 84602910, it meets international standards for quality and performance. Grinding Dimensions: 630 x 4000 mm Weight: 32,000 KG HS-Code: 84602910 Discover precision machining with the STANKO 3M194, equipped with a spacious grinding area of 630 x 4000 mm. Weighing at 32,000 KG, this robust machine ensures stability and reliability in your machining processes. Classified under HS-Code 84602910, it meets international standards for quality and performance. The 3M194 not only offers impressive dimensions but also incorporates innovative technology, en ...
used
grinding length: 400 mm grinding width: 250 mm workpiece height: 200 mm total power requirement: 9 kW weight of the machine ca.: 3 t dimensions of the machine ca.: 1 x 1 x 1 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Spherical roller bearings -Bearing type: spherical roller bearing -Bore: Ø 110 mm -Outer diameter: 200 mm -Width: 53 mm -Weight: 7.5 kg
used
Spherical roller bearings -Bearing type: spherical roller bearing -Bore: Ø 80 mm -Outer diameter: 140 mm -Width: 33 mm -Weight: 2.2 kg
Stanko 16K25 Distance between centers: 2000 mm Swing over bed: 500 mm Swing over cross-slide: 290 mm Diametre of main spindle bore: 52 mm Number of speeds: 12,5 - 1600 rpm Digital screen: Yes Length: 2795 mm Width : 1240 mm Height: 1500 mm Weight: 3095 kg Max weight between centers: 1800 kg
used
Round Dividing Table, Rotary Table, Circular Dividing Table STANKO 7204-4022 Table diameter: Ø 400 mm Table height: 140 mm Nu Diameter: 14 / 24 mm Groove depth: 19 mm Centering hole in table: Ø 40 mm, Depth: 10 mm Mounting holes in base plate: Ø 18 x 30 mm ( U-shape ) used, tested ! Dimensions: 730 x 610 x 160 mm
used
Face plate STANKO Outer Ø: 400 mm bolt circle: 135 mm height with jaws: 160 mm bore Ø: 100 mm total height: 160 mm 4 jaws New ! Dimensions: 400 x 400 x 160 mm
used
Machine vice STANKO jaw width: 250 mm wingspan: 220 mm jaw height: 70 mm good condition ! Dimensions: 650 x 300 x 180 mm
used
Machine vice STANKO / BZSP (Made in USSR) Model: 7200-0225 Jaw width: 250 mm jaw height: 80 mm wingspan: 10 - 350 mm on turntable with graduation 360° rotatable used, tested ! solid design ! Dimensions: 670 x 450 x 225 mm
used
Machine vice STANKO / BZSP (Made in USSR) Model: 7200-0225 Jaw width: 250 mm Jaw height: 80 mm Wingspan: 0 - 350 mm on turntable with graduation 360° rotatable can be clamped on both sides ! a slotted hole for fastening is damaged !; used, checked! solid design ! Dimensions: 700 x 355 x 235 mm
used
Machine vice STANKO / BZSP (Made in USSR) Model: 7200-0225 Jaw width: 250 mm Jaw height: 80 mm Wingspan: 0 - 350 mm on turntable with graduation 360° rotatable New ! solid design ! Dimensions: 670 x 345 x 215 mm
used
Water separator, steam trap STANKO 22-12x403 1.0 MPa ( 10 bar ) Connections: 3/8 ( inch ) installation length: 90 mm New ! Dimensions: 185 x 90 x 88 mm