SCHROEDER used machine for sale

sheet width: 1530 mm plate thickness: 2,00 mm distance between columns: mm total power requirement: kW weight of the machine ca.: 0,840 t dimensions of the machine ca.: 1,90 x 1,30 x 1,20 m - manual back gauge 500mm - Hold-down device with hard rubber strip - Sheet metal holding device mechanically controlled to the rear including sheet metal slide - Rear area protection via light barrier The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1020 mm plate thickness: 3,00 mm distance between columns: mm stroke: 120 mm total power requirement: kW weight of the machine ca.: 1,010 t dimensions of the machine ca.: 1,97 x 1,20 x 1,20 m • Sharpening rail • Bending rails 10 mm, 25 mm • Goats foot splint H 50 mm, length 745 mm. segmented • Manual backgauge • POS 400 control • Operation manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General SKUR0090 LocationBarneveld MakeSchröder & Co (D) Typemanufacturer plate is missing No.30-392 Main Features MaterialStainless steel Volume2 Ltr. Motor2.2 KW Specified Features - Scraped surface heat exchanger Capacity2 Ltr. Inletdia. 25mm Outletdia. 25mm With motor2.2 kW 230 Volt With variable speed drivefrequency controller Scraped surface heatexchangers MaterialStainless steel Cylinder sizesdia. 95x350mm Inletdia.25mm Outletdia.25mm Motor2,2 kW 230 Volt With variable speed drivefrequency controller Information Mounted on wheelscheck With switchgearcheck Floorspace1,3x0,4 M Total height1,4 M Weight260 KgScraped surface heat exchangersSchröderHeat exchangers > Scraped surface heat exchangersBrand > Schröder What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destinatio ...

General SKU354T1373 LocationBarneveld MakeSchroder Kombinator TypeVEMK 01/108-350 No.11/4053-1-182757 Year of construction2002 Main Features MaterialStainless steel Volume1.8 Ltr. Motor3 KW Specified Features - Scraped surface heat exchanger MaterialStainless steel 1.4571 (316Ti) Scraped surface heatexchangers Mixercheck Capacity1,8Ltr. Information Total height1,7m Weight380kg CEcheck Floorspace1,7x0,65m Extra Specificationsthe interior is peg mill-based. this machine has been used for margerine / fat operating pressure: 25bar maximum temperature: 90°C capacity: 50-150kg/h used for post-treatment of grease. emulsifier / homogeniser Scraped surface heat exchangersSchröderHeat exchangers > Scraped surface heat exchangersBrand > Schröder What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to  ...

General SKUR0087 LocationBarneveld MakeSchröder & Co Maschinenfabrik (D) TypeVWK 01/60-400 No.110705 Year of construction1989 Main Features MaterialStainless steel Motor2.2 KW Surface0.07 m2 Specified Features - Scraped surface heat exchanger MaterialStainless steel Number of stages:1 Heating surface0.07 M2 Cylinder sizesdia.60x380mm With jacketcheck Inletdia. 25mm Outletdia. 25mm Motor2,2 kW 230 Volt With variable speed drivefrequency controller Information Mounted on wheelscheck With switchgearcheck Total height1,4 M Weight230 Kg Floorspace1,4x0,4 MScraped surface heat exchangersSchröderHeat exchangers > Scraped surface heat exchangersBrand > Schröder What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneve ...

General SKU311P700 LocationBarneveld MakeSchröder&Co Maschinenfabrik (DE) No.23-232 Year of construction1984 Main Features MaterialStainless steel Motor2.2 KW Specified Features - Scraped surface heat exchanger MaterialStainless steel Scraped surface heat exchangerCooler Number of stages:1 Cylinder sizes+/- dia.80mm x350mm Max. temperature-20 degr.C. Inletdia.25mm (product), dia.25mm (Glycol) Outletmissing Motor2,2 KW, 220/380 Volt With variable speed drivecheck With variable speed drivecheck Information Mounted on framecheck Mounted on wheelscheck With switchgearcheck Floorspace1,4x0,7 M Total height1,3 M Weight150 KG Technical specs Extra informationcylinder size: dia. 80 mm x 350 mmScraped surface heat exchangersSchröderHeat exchangers > Scraped surface heat exchangersBrand > Schröder What you can expect from Foeth: -- Machine is in working condition -- ...

General SKUR0088 LocationBarneveld MakeSchröder & Co Machinenfabrik No.33-177 Year of constructionunknown Main Features MaterialStainless steel Motor2.2 KW Rotor90 mm Specified Features - Inline mixer Rotor sizesdia. 90mm Inletdia. 20mm Outletdia. 20mm Motor2,2 kW 230 Volt With frequency controllercheck MaterialStainless steel 1.4401 (316) Inline high shear mixers Inlet20 mm Outlet20 mm Information Mounted on framecheck Mounted on wheelscheck With switchgearcheck Floorspace1,1x0,5 M Total height1,6 M Weight220 KgInline high shear mixersSchröderMixers > Inline high shear mixersBrand > Schröder What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many mor ...

SCHROEDER Plate shears Product number 821741 Manufacturer SCHRODER Model / type unknown Year of manufacture 1998

sheet width: 4020 mm plate thickness: 1,50 mm distance between columns: mm stroke of upper beam: 250 mm cheek lowering: Oberwange 250 mm angle adjustable from - to: 0-180 Grad total power requirement: kW weight of the machine ca.: 4,86 t dimensions of the machine ca.: 5,185 x 1,220 x 1,425 m - Control POS 400 NC - Piece counter - foot switch - Rail quick clamping system - manual backgauge - 1x set split goat tool set - 1 pc. sharp rail - 2 pcs. bending splints - hydraulic upper tool clamping Optional - manual back gauge 750 mm without support table (new from SCHRÖDER) - if you are interested, please contact us The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic tester for hydraulic power pack, hydraulic pump, hydraulic pump, hydraulic test pump, Hydra Sleuth Hydraulic Tester -Manufacturer: Schroder, Hydra Sleuth Hydraulic Tester -Type: PHS-60-3 -Pressure max.: 3000 psi -Accessories: see photos, with wooden box -Dimensions: 775/305/H175 mm -Weight: 25 kg

hydraulic punch, hand punch, hydraulic press, hydraulic punch -Hydraulic punch: without hydraulic unit -Projection: 65 mm -Max. Stroke: 75mm -Piston rod: Ø 50 mm -Piston: approx. 65 mm -Pressure force at 100 bar: 3.3 tons -Pressure force at 160 bar: 5.3 tons -Pressure force at 200 bar: 6.6 tons -Punching tool: Ø 13 mm -Number: 1x devices available -Price per piece -Dimensions: 390/330/H595 mm -Weight: 130 kg

sheet width: 2030 mm plate thickness: 4,00 mm thickness at Niro-steel: 2,50 mm no. of strokes: 34 Hub/min cutting angle: 2,5 Grad table height: 820 mm distance between columns: 2340 mm Control: POS 100 back stop - adjustable: max. 750 mm engine output: 6,8 kW weight of the machine ca.: 2860 kg. range L-W-H: 2870 x 2070 x 1400 mm Machine from a maintenance workshop very well maintained condition - hardly used () Furnishing: - robust / motorized swing-cut guillotine shears - Shatterproof, torsion-free steel welded construction - compact and clear mechanical design - Electric back gauge, with SCHRÖDER POS 100 NC control Digital position display from the backgauge adjustable from the front right with target/actual value input Continuous adjustment over the entire travel range Protection of limit values with limit switches 9-fold programming possible - Duo-Cut drive with two dynamic, ...

sheet width: 3000 mm plate thickness: 2,5 mm distance between columns: 3200 mm Control: POS 800 total power requirement: 6 kW weight of the machine ca.: 4 t dimensions of the machine ca.: B3550x H1550x L2000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3020 mm plate thickness: 2,0 mm distance between columns: 3000 mm Control: POS 500 NC stroke: 250 mm : max. 135 ° adjustment: UW 80 mm back stop - adjustable: 1000 mm work height max.: 975 mm total power requirement: 6,0 kW weight of the machine ca.: 3,35 t dimensions of the machine ca.: 4185 x 1650 x 1425 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3220 mm plate thickness: 2,0 mm daylight opening: 160 mm adjustment: 80,0 mm bending angle max.: 120 ° total power requirement: 4,0 kW weight: 3.965 kg range L-W-H: 4575 x 2450 x 1550 mm Furnishing: - Motorized universal folding machine for single and series production - rotating upper beam / as an automatic tool changing system Reduces set-up and idle times - SCHRÖDER CNC control model POS 2000 with touch screen control panel Color display USB interface automatic cutting calculation Materials and tools library precise bending simulation - Servo converter controlled drives for bending/upper beam beam & electr. backgauge - CNC motorized lower beam adjustment - CNC electrically movable backgauge - with rear sheet metal support surface, including ball casters - Bending/upper tools : Station 1: 1x pointed rail Station 2: 1x split goat foot tool - Free-moving double  ...

sheet width: max. 1500 mm plate thickness: 2,5 mm serial number: 150393 weight: 1300 kg : The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.