RÖHM used machine for sale

Hydraulic power unit, hydraulic pump, hydraulic pump, hydraulic test pump -Hydraulic unit for: power chucks -Hydraulic pump type: 500/510/H670 mm -Pump max. Pressure: 30 bar -Pump max. Liter output: l/min -1x drive: 0.75 kW 1380 rpm -Hydraulic filter -Hydraulic tank -Control valve -Dimensions: 500/510/H670 mm -Weight: 88 kg

Wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks, hydraulic chucks -clamping force: max. 1800 kp -with: interchangeable jaws -Chuck size: Ø 140 mm -short taper -Transport dimensions: 200/200/H150 mm -Weight: 12.1 kg

Hydraulic power unit, hydraulic pump, hydraulic pump, hydraulic test pump -Hydraulic unit for: power chucks -Hydraulic pump type: B1A8E -Pump max. Pressure: 80 bar -Pump max. Liter output: 12 l/min -1x drive: 1.1 kW 1400 rpm -Hydraulic filter -Hydraulic tank -Dimensions: 500/410/H670 mm -Weight: 100 kg

Hydraulic vice, machine vice, hydraulic vice, high pressure vice, hydraulic vice, NC power clamp, NC power vice -Jaw width: 200 mm -Back height: mm -Span width: max. mm -without: counter bearing -Dimensions: 470/200/H180 mm -Weight: 62 kg

Three-jaw chuck, three-jaw lathe chuck -1 set: hard outer jaws -1 set: soft jaws -Chuck size: Ø 160 mm -Weight: 8.5 kg

Hydraulic vice, machine vice, NC compact vice -transfer in current condition as seen -Vise has no spindle and is therefore sold as dismantled -4x clamping jaws: 200 x 60 mm -2x clamping jaws: 160 x 50 mm -Dimensions: 530/160/H165 mm -Weight: 104 kg

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck, three-jaw chuck with clamping plate -Manufacturer: Rohm, three-jaw chuck with clamping plate -Chuck size: Ø 250 mm -Passage: Ø 76 mm -Clamping plate: 500 x 310 mm -Dimensions: 500/310 / H300 mm -Weight: 72 kg

Machine vice with table RÖHM jaw width: 125 mm jaw height: 45 mm wingspan: 12 ... 210 mm pneumatic clamping booster ! with turntable, 360 ° rotatable used, tested ! Dimensions: 440 x 300 x 145 mm

Power chuck, 3-jaw chuck, three-jaw chuck, wedge hook chuck RÖHM KFD-200/3HS 143888 outer diameter: Ø 200 mm Height without jaws: 110 mm Passage: Ø 66 mm Speed: max. 6500 rpm Flange diameter: Ø 200 / 170 mm bolt circle diameter: Ø 134 mm 3x screw M12 x 1.75 jaws individually adjustable by toothing ! with accessories ! New ! Dimensions ( lathe chuck ): 200 x 200 x 110 mm Dimensions ( packaging ): 230 x 230 x 240 mm

Machine vice with quick adjustment and force amplification RÖHM 160 mm jaw width: 160 mm jaw height: 54 mm wingspan: 0...110 / 210 / 310 mm wingspan in 3 steps ! used, tested ! Dimensions: 550 x 250 x 135 mm

Clamping claw, single clamping claw, 2 pieces RÖHM 149124 Type: T-Slot 18 DIN 650 ( M16 ) Groove width: 18 mm Dimensions( single clamping clamp ): 75 x 45 x 30 mm New ! 2 pieces ! Dimensions( packaging ): 145 x 110 x 50 mm

2-jaw chuck, two-jaw chuck, power chuck, wedge hook chuck RÖHM KFD-160/2 outer Ø: 160 mm bolt circle Ø : 104.8 mm Flange Ø : 140 mm jaws individually adjustable by toothing used, checked ! Dimensions: 335 x 170 x 160 mm

2-jaw chuck, two-jaw chuck, power chuck, wedge hook chuck RÖHM KFD-160/2 outer Ø: 160 mm bolt circle Ø : 104.8 mm Flange Ø : 140 mm Jaws individually adjustable by toothing used, checked ! Dimensions: 220 x 165 x 160 mm

Hydraulic full tension cylinder RÖHM OVS 85 ( OVS85 ) p: 75 bar n: 8000 rpm piston stroke: 32 mm piston rod diameter: Ø 30 mm New ! Dimensions: 340 x 210 x 120 mm

2 pieces, reducing sleeves RH RÖHM 262 MK5 : MK3 DIN 2185 Dimensions: 170 x 40 x 90 mm

diameter: 250 mm diameter: 250 mm numer of jaw: 4 Stück numer of jaw: 4 Stück bore: Ø 75 mm bore: Ø 75 mm thickness of jaw: 23 mm thickness of jaw: 23 mm : 41 mm : 41 mm tool adaptor: KK6 DIN 55027 tool adaptor: KK6 DIN 55027 weight: 32 kg - Serial-No.: 01330 - Flat spiral chuck - Jaws centrically clamping and individually adjustable - with chuck key The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diameter: 315 mm hollow: 100 mm weight: 50 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diameter: 800 mm bore: 380 mm Thickness: 150 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diameter: 500 mm thickness of jaw: 40 mm total power requirement: . kW weight of the machine ca.: . t dimensions of the machine ca.: . m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine vice mechanical / hydraulic make RÖHM type RBFabr. -No: ID158413 / PTechnical specifications:Jaw width: 160 mmJaw height: 49.6 mmTotal length: 817 mmTotal height: 133 mmTotal width: 240 mmPunching force: 50 kNWeight approx: 60 kgWith- Clamping range 310 mm- mechanical drive with hand crank- hydraulic power transmission via hydraulic unitused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

diameter: 250 mm hollow: 105 mm weight: / kg - Four-jaw chuck RÖHM - Diameter Ø250mm - Passage: Ø105mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diameter: 250 mm hollow: 75 mm weight: 40 kg - Four-jaw chuck RÖHM - Diameter Ø250mm - Passage: Ø75mm - Weight: 40kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

3-jaw-chuck diameter: 240 mm weight of the machine ca.: t for table usage: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diameter: 315 mm hollow: 100 mm weight: / kg Ø 315 mm Ø passage 100 mm Height without jaws 85 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 260 mm numer of jaw: 4 Stück thickness of jaw: 35 mm hight of jaw: 60 mm height of plate: 80 mm tool adaptor: KK 5 DIN 55027 daylight: 68 mm Weight: 30 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thickness of jaw: 160 mm : 45 mm total power requirement: kW weight of the machine ca.: 40 kg dimensions of the machine ca.: m turn tilt plate: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thickness of jaw: 160 mm : 45 mm total power requirement: kW weight of the machine ca.: 40 kg dimensions of the machine ca.: m turn tilt plate: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thickness of jaw: 160 mm clamping capacity: 24 kN weight of the machine ca.: 31 kg mechanical centric vice, low construction With prism jaw and standard jaw SBO size 4 including turntable with graduation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bar: max. 75 bar piston stroke: 0 mm revolutions per minute: 0 U/min 2 pcs. available. Price is for 1 pc. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diameter: 250 mm hollow: 75 mm weight: 30 kg Ø: 250mm Passage: 75mm Weight: 30 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.