We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Granulator with rotor width 1000 mm, motor 37 kW, with hopper attachment and hydraulic feed slide. Knives resharpened and whole machine repainted. Very good condition. Optionally with total separator and fan for the regrind.
used
Granulator with rotor width 500 mm, feed chute, 6 replacement screens with square holes. The upper part can be opened by means of a rack and pinion winch for easy knife change and cleaning. Machine is in very good condition and has been little used. Optionally, a fan and a total separator for the regrind are available.
used
Pallmann wood mill PZC 8-300, unused condition, without grinding wheel, external grinding cage and motor available. Weight approx. 3.5 to.
used
Used mill / granulator made by Pallmann, type PS4 - 7.5. New 1972. Speed: Rotor 640
used
ID2850 Pallmann year/Bauahr 2001 70 t Impact hammer mill, electric motor 500 KW 400V, output: up to 100 tons/hour, infeed width 2000 mm, rotor diameter 1600 mm, 6 upper feed rollers Impact hammer mill, electric motor 500 KW 400V, output: up to 100 tons/hour, infeed width 2000 mm, rotor diameter 1600 mm, 6 upper feed rollers
used
Drive : 110 KW Dimensions : L 2500 mm x W 1300 mm x H 1800 mm Weight : 2800 kg
used
Drive : 75 KW Dimensions : L 3800 mm x W 1600 mm x H 2200 mm Weight : 3900 kg.
used
Drum chipper Pallmann Type: PHT 140/500 Year of construction: 1980 Passage width max. 550 mm Passage height max. 160 mm Engine 37 kW
used
we sell a Pallmann granulator IPS 50x1000. Year of construction :2001. The machine is fully operational. The regrind discharge is equipped with an extraction chute. Optionally, we can also offer you other system components, e.g. Cyclone, etc. Control cabinet with input load switching is included.
used
Power supply: approx. 400 x 1250 mm Rotor width: approx. 1250 mm Rotor diameter: approx. 400 mm Stator knives: 3 Rotor blades: 9 Propulsion: 75 kW
used
Power supply: approx. 400 x 1250 mm Rotor width: approx. 1250 mm Rotor diameter: approx. 400 mm Stator knives: 3 Rotor blades: 9 Propulsion: 75 kW
used
Power supply: approx. 400 x 1250 mm Rotor width: approx. 1250 mm Rotor diameter: approx. 400 mm Stator knives: 3 Rotor blades: 9 Propulsion: 75 kW
used
For sheets, plates, etc. With horizontal feeder Working width 1050 mm, max. inlet height 50 mm Open rotor 600 mm diameter with 4 blades 2 stator knives Main engine 75 kW
used
GRANULATOR TYPE PALLMANN PS-H 1000 x 1400, 132 kW very good condition incl. 3 sets of rotor knives and stator knives incl. 2 sets of screens, 5 and 8 mm IMMEDIATELY AVAILABLE AND READY FOR USE
used
For rolls, plates, etc. With horizontal feed mechanism Working width 1050 mm, maximum inlet height 50 mm Open rotor 600 mm diameter with 4 blades 2 stator knives Main engine 75 kW
used
For rolls, plates, etc. With horizontal feed mechanism Working width 1050 mm, maximum inlet height 50 mm Open rotor 600 mm diameter with 4 blades 2 stator knives Main engine 75 kW
used
For sale two (2) maschines made by Pallmann, one 132 and second 200kw for processing chipwood till saw dust in wet condition (this maschine has rottary kniwes moving on left side and sieve moving opposite and make super results. Price: 132kw = 20.000 EUR Price: 200kw = 39,000 EUR
used
Drives: 45 KW + 15 KW Weight: 2100 kg Dimensions: L 3.50 m x W 1.36 m x H 1.52 m;
used
Stock# U2293-1 Used stainless steel contact parts horizontal hammer mill by Pallmann (Germany) type PHM 600-350. Mill has internal dimensions of milling chamber L 600 mm x W 350 mm. Top of milling chamber is manually rised. At the bottom mill has a discharge outlet through the screen. At the top of milling chamber there is installed static knife for grinding of product. Rotor has diameter 500 mm x width 345 mm. On the rotor there are 24 rows with hammers, each row consist of 4 hammers. Total number of hammers is 96. Rotor and hammers are designed in non-corrosive steel. Rotor is belt driven by el. motor 75 kW, 2975 rpm, 380/660 V, 50 hz. Mill has side feeding inlet with dimensions 350 mm x 265 mm. Product is moved into milling chamber through three screws. Screws are driven by el. motor 0.55 kW, 2800 rpm, 220/380V, 50 hz and varispeed gearbox with manual adjustment of outgoing rotatio ...
used
Stock number: U2293-2 Used carbon steel grinding/refining mill by Pallmann (Germany) model PR8. Mill has bolted rotor with diameter 795 mm and stator with diameter 800 mm. Belt driven by el. motor 100 kW, 1480 rpm, 380 V, 50 hz. Manual adjustment of gap between milling plates. Mill has mounted 5 nozzles for feeding gas or liquid inside the milling chamber. Front door bolted with central feeding inlet through feeding chute. Bottom discharge.
used
Drive: 55 KW / 1480 RPM / 500 V Speed rotor: 645
used
- Drum Shredder/Shredder Pallmann - with inlet funnel - Serial number 0806.2006.0017
used
Working width_ 600 mm Working height_ 300 mm N of knives_ 3 OTHERS AVAILABLE FROM STOCK
used
Material: steel Engine: 37 kW Weight: 900 kg Length x Width x Height: 1300 mm x 1000 mm x 900 mm Applicable for production of finest plastic-powder: - finest powder without use of nitrogen - best powder characteristic: best flow behaviour, high apparent density and narrow particle distribution - low grinding temperature, in terms of optimal ducting of the air - fully automatic continous operation - simple regluation of particle size. Throughput rate : 50 - 200 kg / h. Very good condition. Are you looking for something else? Write us below! WE PROJECT AND BUILD YOUR ENTIRE PLANT EXACTLY FOR YOUR NEEDS FROM USED AND NEW MACHINES.
used
General SKU272T609 LocationBarneveld MakePallmann TypeREF 6N No.0111.92.049 Main Features Motor30 KW Specified Features - Fine Impact Mill MaterialMild steel, Stainless steel Fine Impact Mills Grindercheck Toothed disc millcheck Rotor sizedia. 570x130 mm Grinding room sizedia. 600x160 mm With grinding platenscheck Inlet135x175 mm Motor30 kW 380 Volt Speed3700 rpm Information Year of construction1992 Mounted on framecheck Floor space1,7x1 m Total height1m Weight1100 kg Extra SpecificationsEasy cleanFine Impact MillsPallmannMills > Fine Impact MillsBrand > Pallmann What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
used
General SKU160P705 LocationBarneveld MakePallmann TypePP 4 No.0668145 Year of construction1968 Main Features Motor15 KW Inlet diameter400 mm Specified Features - Fine Impact Mill Turbo cone mill(1x) 2 Driven rotors(impeller & co-rotating baffle plate) Rotor sizeDia. 400mm Inlet155x100mm Motor15 KW + 7,5 KW, 380 Volt SpeedMax. 4100 Rpm, Grinding disc 1450 Rpm Fine Impact Mills MaterialMild steel Information With switchgearcheck Floorspace2,1x1,1 M Total height0,8 MFine Impact MillsPallmannMills > Fine Impact MillsBrand > Pallmann What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
used
Brand: PALLMANN, Model: IPS 500x1000, Year of construction: 2001, Electro: 75 KW, Spare parts: Cutting blades and others., Warranty: none, Terms of delivery: EXW Germany, Machine is ready for use and can be put into operation quickly at any time., fire: PALLMANN, model: IPS 500x1000, Year of construction: 2001, Electro: 75 KW, Warranty: none, Terms of delivery: EXW Germany
used
Pallmann crusher Is in working order. Characteristics are not known.
used
PALLMANN AGGLOMERATOR IPA400/40, for LDPE HDPE LLDPE PP, 250 kw drive on agglomerator, 18,5 kw drive on vent, GThe supply includes :, ZERMA GRANULATOR 700/1000, 55 kw drive on granulator, cyclone, fine separator, The line is now dismantled bu complete in all its parts, 400V 3 ph.50Hz, RECONDITONING on request