MEP used machine for sale

Key data: 350 mm

From insolvency: Light Alloy Circular Saw Mep Cobra 352 MA Year of construction 2018 Saw blade diameter 350mm 2 pneumatic material clamps I2qszckei Coolant system Roller conveyor left 1800mm Stop right 600mm 2 sawing speeds 1700 / 3400 rpm Mitre cuts li + re 40/45° Shifter cuts up to 45° 380 volts 2.2KW + 1 pc newly ground saw blade Replacement stop jaws Capacity Cutting range ROUND 0°: 120 mm Cutting range AROUND 45° left: 120 mm Cutting range AROUND 45° right: 110 mm Cutting area SQUARE 0°: 105 mm Cutting area SQUARE 45° left: 100 mm Cutting area SQUARE 45° right: 95 mm Cutting area FLAT 0°: 180 x 70 mm Cutting area FLAT 45° left: 135 x 60 mm Cutting area FLAT 45° right: 135 x 60 mm Cutting range inclined ROUND 45°: 50 mm Cutting range SQUARE 45° inclined: 50 mm Cutting area FLAT 45° inclined: 160 x 35 mm / 180 x 20 mm

Article number: 19-03-027 Manufacturer: Mep Very good general condition Machine workshop-tested Shipping time: All rights reserved. Year of construction: ca.1991 L x W x H: ca.700x900x1100mm Weight: approx. 150kg Saw blade dimensions: approx. 400x3,6x40mm Saw blade speed: approx. 2800 rpm Accessories  Pneumatic clamping  Saw blade  Miter-adjustable back stop Other accessories on request Price and other technical data on request

Specifications: - Saw blade dimensions 275 x 2 x 40 mm - 2 saw blade spindle speeds 44 + 88 rpm - Cutting range at 90° around 90 mm - flat 110 x 60 mm - Mitre adjustable up to 45 ° - Material vice - Drive 400 V / 1.5 / 1.8 kW - Coolant device - Space requirement approx. W 600 x H 1400 x D 900 mm - Weight approx. 200 kg

Key data: 200 mm

Sawing Capacity: 160 mm round 160 mm square 160 x 200 mm Rectangular Sawing capacity 45 degrees: 130 mm Round 120 mm square 60 x 140 mm Rectangular Sawing capacity 60 degrees: 80 mm Round 60 mm square 60 x 80 mm Rectangular Sawing speed: 33/66 mtr./min. Saw band: 2375 x 20 x 0.9 mm 2375 x 19 x 0.8 mm Equipped with: - Coolant system - Emergency stop - Material stop 840 mm Country of origin: Italy Motor power: 1.9 Kw Machine weight: 310 kg Machine LxWxH: 1100 x 800 x 1500 mm

Inv. Num. : 7326 Type: FORMAT 16 3D HS Producer: MEP Created: 2012 Parameters: Bending steel: 6-16 mm Equipment: Unwinder

Key data: 350 mm, 115 mm

Speeds 15, 30, 45, 90 rpm Swivel -45 to +60 ° Cutting capacity - rectangle 180 x 95 mm Cutting capacity - Round 115 mm Cutting performance - square 95 mm Cutting range at 45 degrees: approx. 110 mm Total power requirement 3.1 kW Machine weight approx. 375 Kg Space requirement approx. 0.9 x 1.1 x 1.9 m

one used MEP Format S stirup bending machine • Single strand processing wire diameter cold drawn, hot rolled, smooth or ribbed wire from Ø 6 to Ø 12 mm from #2 to #4 fy = 600 N/mm² • Double strand processing wire diameter cold drawn, hot rolled, smooth or ribbed wire from Ø 6 to Ø 10 mm from #2 to #3 fy = 600 N/mm² – ft = 700 N/mm²

Bend Saw Automatic MEP SHARK SX DUTY used machine in good working condition . Price on request

Machine Details Stock-No. 1105-03834 Type of machine Cold Circular Saw Make MEP Type TIGER 350 Year of manufacture 1996 Type of control conventional Storage location HAGUENAU Country of origin Germany Delivery time immediately Freight base free truck Technical details saw blade diameter 350 mm Cutting diameter 250 mm stroke 170 mm Capacity 90 degrees: flat 235 X 70 mm capacity 45 degrees: flat 85 X 70 mm Cutting Speed 26/ 52 m/min total power requirement 3 kW weight of the machine approx. 700 KG Additional information VERY NICE

Semi-automatic metal band saw Cutting performance: 0° Round 300 mm, square 260 mm, width x height 330 x 260 mm // 45° left: round 260 mm, square 250 mm , width x height 270 x 200 mm, // 60° left: round 180 mm, square 170 mm , width x height 170 x 170 mm // 45° right: round 200 mm , square 180 mm , width x height 200 x 160 mm ,

Circular saw Manufacturer: MEP Type: Tiger 350

Sawing capacity: 280 mm round / 330 mm square Sawing capacity 45º: 250 mm round / 250 mm square Sawing speed: 40/80 mtr.min. Band saw blade: 3,320 x 27 x 0.9 mm Saw angle: 0 - 60º Equipped with: - Cooling system Country of origin: Italy Motor power: 1.8 kW Machine weight: 700 kg Machine LxWxH: 190 x 120 x 135 cm

Fully automatic circular saw with miter cut - up to 300 sawing programs - single stroke 1,000 mm, repeatable as desired - Saw blade: HSS 370 x 32 x 3 mm - Blade speed: 5 - 150 1/min - Vice opening 190 mm

MEP Multimatic SA8, year of construction 1995 Straightening and cutting system for reinforcing steel, fully automatic, complete functional system, immediately available Plant still in operation and can be demonstrated.

COBRA 352 SX evo, semi-automatic electropneumatic sawing machine to cut aluminium and light alloys using blade with electrowelded hardmetal plates (HM). The machine cuts from 45° right to 45° left and the head tilts from 0° to 45° left so as to make inclined cuts. Sawing machine with controlled single axis microprocessor with the latest generation of controllers for semi-automatic sawing machines designed by MEP. OPERATION: Starting the cycle by means of the relative push-button the following steps are carried out: – the vice closes and the motor starts – the head goes down to execute cut – motor stops – head returns to top position and vice opens. BEST PRICES IN EUROPE FOR MEP MACHINES! ASK FOR A QUOTE

SHARK 512 SXI evo, semi-automatic electro-hydraulic sawing machine with 4640x34x1,1 mm band, to cut pipes, profiles and beams up to 510×320 mm at 0°. Extremely versatile machine, for cuts between 60° left and 60° right. CUTTING CYCLE: after having positioned the bar, starting the cycle the following operations are performed: vice closing – motor start – head descent for cutting – motor stop – head return – vice opening. CYLCE DOWN UP: Operating in semiautomatic cycle , the new function DOWN makes the head and blade motor stop once the cut is finished with the vice closed, by pressing the UP button the head raises back to its starting point and the vice opens. ASK FOR EVERY MODEL OF MEP MACHINES, WE HAVE THE BEST PRICES IN EUROPE

SHARK 281, manual band sawing machine to cut from 0° to 60° left. A FEW FEATURES: Electric panel (wiring totally identifiable, stand-by, loose-key safety switch, main switch, pole change switch, emergency stop, motor magneto-thermal overload, minimum tension coil, protection against missing phase, low tension safety device (LTSD 24 V).- IP55 control handle. BEST PRICES FOR ALL MEP MACHINES IN EUROPE! ASK FOR A QUOTE

SHARK 281 CCS (Cut Control System) manual bandsawing machine to cut from 0° up to 60° left. Other than the manual cut mode, the sawing machine can make single cuts without operator, using the head weight control- led by a hydraulic brake: after the cut the band stops. The frame at this point is manually lifted to the position needed in order to reposition the bar to cut . In the version with pneumatic vice (MA) the vice is opened/clo- sed by a manually-controlled valve (optional with pedal control). BEST PRICE IN EUROPE

Technical data: -Saw blade size 300 x 3.4 x 32 mm -Blade rotation speed RPM -Section - at 90 ° round 90 mm or square 80 mm -Pneumatic chucks -Material supplies automatic position control -Easy lifting up to approx. 1000 mm -Multiple hub -Swing-arm control panel with CNC control MEP -MOT. Dust aspiration + mobile chip extraction -Drive 400 V / 1,1 kW - space requirement approx. B 2750 x H 1800 X 2000 mm -Weight approx. 600 kg

Description: Manual cold circular saw with: - Machine base - Support rail - Quick release device Saw blade diameter 315 mm Cutting range at 90 degrees: around 100 mm Cutting area at 90 degrees: square 90 mm Speed 35 / 70 rpm Saw blade dimensions 315 mm Machine weight approx. 350 kg Space requirement approx. 800 x 800 x 1400 mm weight approx.: 350 kg, Approx. Onsite Dimension. (l x w x h): 800 x 800 x 1,400 mm

Description: Semi-automatic - pneumatic. Stretcher - Footswitch Saw blade diameter 400 mm Cutting diameter 130 mm Speed range 2800 rpm Machine weight approx. 220 kg Dimensions L x W x H 700 x 600 x 1700mm Approx. Onsite Dimension. (l x w x h): 700 x 600 x 1,700 mm, weight approx.: 220 kg

Description: Electro-hydraulic semi-automatic bandsaw Cutting diameter 250 mm Cutting area at 90 degrees: flat 280 x 220 mm Cutting area at 90 degrees: square 220 x 220 mm Vice 285 mm Speed range: 36/72 m/min Saw band dimensions 2950x27x0.9 mm Total power requirement 1.5 / 1.8 kW Machine weight approx. 485 kg Space requirement approx. 1700 x 1000 x 1800 mm weight approx.: 485 kg, Approx. Onsite Dimension. (l x w x h): 1,700 x 1,000 x 1,800 mm

Description: Saw blade 250mm Connection voltage 400 volts Power 0.8 KW Cutting diameter 70mm Miter right max. 45° weight approx.: 150 kg, Approx. Onsite Dimension. (l x w x h): 700 x 700 x 1,500 mm

Description: Equipments: - HM saw blade - Feed roller conveyor 7500mm - Roller conveyor with stop system 1500mm - Machine without workpiece clamp Saw blade diameter 350 mm Cutting diameter 120 mm Speed 1700/3400 rpm Saw blade dimensions 350 mm Cutting area at 45 degrees: flat 135 x 60 mm Cutting area at 45 degrees: around 120 mm Cutting area at 90 degrees: flat 180 x 70 mm Cutting area at 90 degrees: square 105 mm Machine weight approx. 0.6 t Dimensions L x W x H 1600 x 800 x 1700 m weight approx.: 600 kg, Approx. Onsite Dimension. (l x w x h): 1,600 x 800 x 1,700 mm

Description: Vice with quick adjustment and adjustable guide rails Hydraulic belt tensioning device with tensioning pressure indicator chip removal brush Adjusted precision stops for cuts of 0°, 45° and 60° left and 45° right Cutting diameter 250 mm Saw band length 2950x27x0.9 mm table height mm Belt speed 36/72 m/min Total power requirement 1.8 kW Machine weight approx. 440 kg weight approx.: 440 kg, Approx. Onsite Dimension. (l x w x h): 1,500 x 1,000 x 1,700 mm

Cutting range: 90° round: 210mm, 90° square: 200x200mm, 90° flat: 270x200mm,45° round: 180mm, 45° square: 180x180mm, 45° flat: 180x190mm.

Description: With roller conveyor left and right Roller conveyor left with stop Roller conveyor dimensions left: approx. 4000 mm Roller conveyor right with stop Roller conveyor length right: approx. 1500 mm Max. Material width: approx. 160 mm Saw blade diameter: 400 mm Incl. extraction system, dosing system and fine spray system Machine body dimensions: 710 x 900 x 1500 weight approx.: 1,000 kg, Approx. Onsite Dimension. (l x w x h): 7,000 x 1,000 x 1,500 mm

Description: CNC control MEP Automatic aluminum circular saw Saw blade dimensions 350 x 3.4 x 32 mm Miter adjustable left + right 45 ° Cutting diameter 120 mm Working height 930 mm Cutting area at 45 degrees around 120 mm Cutting area at 45 degrees square 180 x 70 mm Cutting area at 90 degrees flat 105 mm Cutting area at 90 degrees square 100 mm Total power requirement 1.5 / 2.2 kW Single stroke up to 650 mm Multiple stroke Mot. Vacuum cleaning + chip extraction Accesories 2x runway and documentaries weight approx.: 1,000 kg, Approx. Onsite Dimension. (l x w x h): 2,500 x 2,000 x 1,700 mm

cutting diameter: 330 mm saw band length: 4500 mm capacity 45 degrees: flat: 300 x 300 mm capacity 45 degrees: round: 320 mm capacity 45 degrees: square: 300 x 300 mm capacity 60 degrees: flat: 200 x 250 mm capacity 60 degrees: square: 200 x 200 mm capacity 60 degrees: round: 210 mm capacity 90 degrees: flat: 450 x 320 mm capacity 90 degrees: square: 320 x 320 mm turning speed range:: 20 - 100 m/min dimensions of saw-band: 4500 x 27 x 0.9 mm vice: 455 mm total power requirement: 1.5 kW weight: 1080 kg range L-W-H: 1700 x 1880 x 1650 mm Machine in well-maintained condition () Furnishing: - Miter cuts from - 60° left to + 60° right - Hydraulic unit for automatic saw bow lifting - stepless, adjustable saw bow lowering - mechanical reduction gear for belt speed. 20-100 m/min. - swiveling control panel - Saw band guide heads on linear guides - robust/stable vice with quick adjustment and l ...

Description: Motor power 1.8/2.5 kW Belt opening 190 mm Belt dimensions 350x32x2.5 Speed 15/30/45/90 1/min Cutting surface 0° 115 / 95 /180x95 Cutting surface 45° right 110 / 95 / 125x95 Cutting surface 45° left 110 / 95 / 125x95 Cutting surface 60° right 90 / 90 / 90x90 weight approx.: 380 kg, Approx. Onsite Dimension. (l x w x h): 2,050 x 1,050 x 1,120 mm