We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
Model
(Manufacturer: IMA)
used
Edge magazine IMA - 6x - 24x fold magazine - 550 or 800 mm coil diameter Several versions available from stock. Price on request.
used
PU preheater IMA 2,5 kg
used
Radius profile scraper IMA 08.263
used
Radius profile scraper IMA Type: 08.515
used
End trimming unit IMA Type: 08.41 - pneumatic swivable
used
Glue application with gearbox Make: IMA - glue application 04.088 - gearbox 04.156
used
Grooving unit IMA Type: 08.183 - controllable - swivable
used
Description: IMA ADVANTAGE 4612 Edgebander Motor data: 380 V - 50 Hz - 15 Kw - 37 A Suction nozzle: 120 mm Pre-wired for Pre-milling Unit Space Edge thickness: 0.4 - 12 mm Workpiece thickness: 10 - 45 mm Edge material height: 14 - 55 mm End trimming unit Rough Milling unit MFA Milling Unit (Fine Milling + Corner Rounding) Profile Scraper + Flat Scraper + Buffing unit Feed approx.: 12 m/min Compressed air approx.: 7 bar serial number: 02305, edge thickness: 0,4 - 12 mm, workpiece thickness: 50 mm, feed: 12 m/min, control: IMA 1101, Approx. Onsite Dimension. (l x w x h): 6,100 x 1,800 x 2,000 mm, weight approx.: 3,100 kg
used
Used IMA P10K Automatic Butter Roll – Round – Log – portion wrapping machine in aluminium foil / parchment paper., The machine is included with the following pack format sets:, - Logs (or) Rolls (or) Round (or) Cylinder – ± 43 mm x 110 mm = 125 gram (complete), - Logs (or) Rolls (or) Round (or) Cylinder – ± 48 mm x 160 mm = 250 gram (complete including extra mouldset of ± 45 mm to reach ± 230 gram)., - Rectangular Blocks (or) Portions – 100 mm x 75 mm x 35 mm = 250 gram (filling nozzle and 1x guide for the bricks when they are upside down are missing)., - Rectangular Blocks (or) Portions – 160 mm x 105 mm x 65 mm = 1.000 gram (Guiding plate upside down, side guides and support level missing)., Product is fed through the hopper which includes a butter screw feeder., Maximum Speed: up to 60 packs per minute (Varies depending on the portion size), Products that can be pack ...
used
Description: Serial number 18465, with gluing unit, 4 vacuum cups, mounted on steel plate, with swivel arm Approx. Onsite Dimension. (l x w x h): 3,500 x 1,200 x 3,500 mm, weight approx.: 500 kg
used
IMA milling unit - several milling motors immediately available from stock - price on request, depending on equipment and condition
used
Description: for roll and strip material , with SIMATIC 55 line control. Machine processes the workpieces in forward and return motion, therefore only one person is required to operate it Workpiece height (max.) 50 mm Edge thickness (max.) 12 mm Operating hours 1,464 h Machine number 00191 Total machine length: 4750 mm or 5600 mm with attachable extension Machine depth: 750 mm with extendable 2nd support from 0 to 1450 mm. Working height: 850 mm. Machine height: 1350 mm, cover hood open 1900 mm. Feed speed approx. 18 m/min (unchangeable). Connection for suction: 3x 100 mm connection diameter. Compressed air connection: min. 7 bar max. 10 bar. Connection: 3 / 8'. Operating voltage: 3 / N / PE / 380 V / 50 Hz. Nominal power: 7 kW. Rated current: 20 A. Supply cable cross-section: 4 mm². Fuse to be connected upstream: 25 A. Workpiece data: Workpiece projection: 37 mm (+ edge thickness) ...
used
CNC machining center, manufacturer: IMA, type: BIMA/G/X30/R/130/530, year of manufacture: 2013, serial no.: 33003, main spindle, cross head, saw head 0/90, drill bar, working dimensions: approx. 130x530 cm, vacuum clamping table with 2 vacuum pumps, 8-/16-fold tool changer, grid shut-off, milling cutter, mounts, tool, accessories, CNC control IMA, overhauled replacement spindle installed in 2023, operating hours read at the end of 2023: read operating hours (h): 4,123, read spindle hours (h): 600, currently Operating hours not readable, exact number of hours therefore unknown
used
IMA LIBRA SENSITIVE Labeller 1995 IMA LIBRA SENSITIVE AV. Format parts: 1,2,5 and 10 ml. ampoules;
used
IMA LIBRA SENSITIVE Labeller 1998 IMA LIBRA SENSITIVE AV. Format parts: 1,2,5 and 10 ml. ampoules;
used
Set up for ALU/PVC-PVDC-ACLAR, 1-lane Plate forming, roller sealing Output max. 350 blisters/min, max. 175 cartons/min Moulding area blister in running direction max. (W x L) 180 x 140 mm Blister width 30-90 mm Blister length 60-140 mm Drawing depth 3-12 mm Folding carton dimensions (W x L x H) 35-95 x 65-145 x 12-100 mm Hapa 230-T-1C-LR flexo printing unit, unused Directional feeder (Sombrero) for tablets / capsules Brush box feeder for coated tablets and film-coated tablets Sealing pressure control Print mark control cover film Blister embossing station Blister perforating station Integrated cooling device Product inspection with colour camera (1024-800 pixels) and code reading by IMA Antares-Vision system Code reading Pharma Code, Data Matrix, EAN, etc. for 2x leaflet, leaflet presence, folding carton Refill ...
used
size of incoming product: 32 x 122 x 164mm final product size: 130 x 170 x 208mm speed : 25cpm These machines are brand new and have been used for 8 months in two shifts of 5 days a week.
used
Manufacturer: IMA , Type: Fügefräsen, Motor with gear: 2 Motoren steuerbar und verstellbar, Spindle length mm: ca.60, Motor with gear: 2 Motoren steuerbar und verstellbar, Speed rpm: ca.2,2 kw/5860 , Overhauled on: inkl. Haube,
used
Manufacturer: IMA, Type: Radiusfräsen, Gear: 2 Motoren tastend oben und Seite, Power kW: 1, Volt/Hz: 133, pm: 11500, Gear: 2 Motoren tastend oben und Seite,
used
Manufacturer: IMA Kantenfräsen tastend von oben, V1: 133, Hz 1: 200, Power kW: 1,8, Speed rpm: 11575,
used
Manufacturer: 2 Stück Radienschleiffagregat, Spare part from machine: IMA, Profile sanding unit: 2, Total hight mm: 200, Installation width mm: ca.300 pro Aggregat, Pneumatically controlled: yes, Sanding belt hight: 30, Sanding belt width max mm: ca.30, Sanding belt length max mm: ca.2100, Main engine kW: 2 X 0,55 , Belt clamping pneumatically: yes, radius sanding device: yes,
used
Manufacturer: IMA, Spare part from machine: Kantenmaschine, Kantenschleifaggregat: Schuhschleifaggregat, Total hight mm: 400, Installation width mm: ca.350, Pneumatically controlled: yes, Axis-controlled: pneumatisch, pneumatisch gesteuert : yes, Sanding belt hight: ca.150, Sanding area (beam): ca .30, Sanding belt width max mm: 150, Sanding belt length max mm: 2100, Work piece hight min-max mm: 100,
used
Manufacturer: Igel Puffer 40 Pufferplätze, Working length mm: 3450, Working widht mm: Ablagefläche ca1000 mm/fachtiefe 60 mm, Frequency converter: möglich, Engine power kW: ca.2,5, FREE TEXT: Stangenlänge 440 mm,
used
Manufacturer: IMA, Type: BIMA G X60 R 160/730, Year: 2012, Control: IMA Woop, Software: ICOS CNC, Work piece width min-max mm: 1600-2000, Min.-max. workpiece length in mm: 7000 oder 2 X 2900, Min.-max. workpiece height in mm: ca. 250, Working range X: 7300, Working range Y-axis: 1600-2000, Working range Z: 500, C axis: yes, B-axis: yes, Pendulum processing: yes, Work piece width min-max mm: 1600-2000, Min.-max. workpiece length in mm: 7000 oder 2 X 2900, Number of milling spindles vertical: 1, Tool adaption system: HSK 63, Milling engine 1 hours power: 16, rpm 1): 0-24000, Number of tool changers: 2, Tellerwechseler: 18-fach und 2 fach, Vertical drills-X: 11, Drill vertical Y: 11, Horizontal drills-X: 2, Drill horizontal Y: 3, Traverse table: 8, 2 station allocation: yes, 4 station allocation: yes, Stops in the table front: yes, Stops in the table rear: yes, Vacuum pumps m³/h: 140, ...
used
Manufacturer: IMA, Type: Transportband, Control: no, Working widht mm: 1000, Total hight mm: 920, Belt width: 1000, Total power kW: ca.1,5, Feeding speed min-max m/min: ca.10-30 über Umrichter möglich,
used
Manufacturer: IMA Verleimteil, Spare part from machine: IMA AVM , Year: ca.1990, Gluing part left side: yes, Own drive: Ölbadatrieb, Min-max height of gluing part mm: 90 Walze, Plug connection: yes, Temperature regulation: yes, Year :ca.1990
used
Manufacturer: IMA Kantenschleifaggregat, Spare part from machine: IMA, Kantenschleifaggregat: yes, for left machine side: yes, Own drive: yes, Installation width mm: 330, Max. roller diameter: 40, Vertical: yes, Pneumatically controlled: yes, Sanding belt length max mm: entspannt 1990 mm gespannt 2050, Work piece hight min-max mm: 100, Main engine kW: 1,65, Belt clamping pneumatically: yes, Oscillation: yes, System dismantled: yes,
used
Manufacturer: IMA Radienschleifeinrichtung oben und unten, Spare part from machine: IMA, Profile sanding unit: yes, for left machine side: yes, Own drive: yes, Total hight mm: 600, Max. roller diameter: 40, Slewable horizontally: yes, Sanding belt hight: 20, Slewable sanding head: yes, Sanding belt length max mm: ca.2100, Main engine kW: 2 X 0,25, Belt clamping pneumatically: yes, Hight adjustment by hand wheel: yes, radius sanding device: yes, Oscillation: no,
used
Manufacturer: IMA mit Verleimung, Type: GX30/E/130/430, Year: 2014, Control: IMA, Software: IMA Woop 10, Barcode: möglich, Maschinensteuerung: IMA Woop 10, Programming station office: yes, Work piece width min-max mm: 1400, Min.-max. workpiece length in mm: 150-4300, Min.-max. workpiece height in mm: 10, C axis: yes, Pendulum processing: yes, Work piece width min-max mm: 1400, Min.-max. workpiece length in mm: 150-4300, Min.-max. workpiece height in mm: 10, Number of milling spindles: 1, Tool adaption system: HSK F-63, rpm 1): 1000-24000, Number of tool changers: 18, Tellerwechseler: 1, Pickup Wechlser: 1, Mitfahrender Werkzeugwechsler: yes, Working widht max mm: 1400, Number of tables: 2, Traverse table: yes, 2 station allocation: yes, Stops in the table front: yes, Vacuum pumps m³/h: 2 X 120, Saw unit: yes, Edgebanding unit: yes 2 Fach Rolle, Edgeband hight mm: 55, Magazine Qty: ...
used
Manufacturer: IMA, Type: BIMA 610 V, Year: 1998, Software: IMAWOP 5.0, Programming station office: IMAWINCAD , Work piece width min-max mm: 1.400, Min.-max. workpiece length in mm: 5.000, Min.-max. workpiece height in mm: 40/100, Pendulum processing: 2 x 1.750, Work piece width min-max mm: 1.400, Min.-max. workpiece length in mm: 5.000, Min.-max. workpiece height in mm: 40/100, Year :1998