We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
Model
(Manufacturer: HOMAG)
used
Single-sided edge banding machine Make: HOMAG Type: KAL 210 AMBITION 2264 Year of construction: 2014 One-sided edge banding machine for editing of straight workpiece edges and for gluing and post-processing in the longitudinal and transverse pass. Overview of aggregate equipment: - Separating agent spray unit - Joining milling unit - Gluing unit A20 with 2 rolls - end trimming unit HL84 - Pre-milling unit BF10 - Form milling unit FK11 manual - Profile scraper PN10 - Finishing unit Feed 18 - 25 m/min. Feed max. with FK11 20 m/min. Working height 950 mm Pneumatic connection 6 bar Total length 7845mm Workpiece thickness 8 - 60 mm Edge height max. = workpiece thickness + 4 mm Edge material roll 0.3 - 3 mm Edge material strips 0.4 - 20 mm Aggregate equipment: - Separating agent spray unit top/bottom - Joining milling unit 2 motors each 3 kW, 150 Hz ...
used
Sanding unit Make: HOMAG Type: PS10
used
Oscillating buffing unit HOMAG
used
Buffing unit - 1 motor
used
Description: - Workpiece length  , All units max. approx. 5200 mm  , Milling cutter 25 mm max. approx. 5375 mm - Workpiece width  , Rear stop for all units max. approx. 1400 mm  , Rear stop cutter 25 mm max. approx. 1550 mm  , Front stop for all units max. approx. 1150 mm  , Front stop milling cutter 25 mm max. approx. 1220 mm - Main spindle 18.5 KW with C-axis  , Speed 0 - 24000 rpm - 72-speed chain changer - Milling spindle 6 KW - LED console position indicator - Chip conveyor belt and articulated belt conveyor (Further tools and units for the tool changer are not included within delivery. Availability depends on the delivery of the new machine. A transport rack from HOMAG is required for transportation of the dismantled machine. This results in costs of EUR 6,500,-- (plus tax). After the transport rack has been returned to Helmut Meier (Germany Burgthann), ...
used
Description: Floor size: 6600 x 1290 mm No. 12-position tool changer. Main spindle with No. 9-tool drilling head. With auxiliary edging head equipped with No. 3 edge slots magazine of adjustable size, size range from: 10mm to 600mm by interchanging the slots. Present two SIEMENS vacuum pumps with NASH ELMO fans.  , Y-axis travel: 1750mm Z-axis travel: 250 mm X-axis travel: 6000 mm  , Control: OMATIC  , Approx. Onsite Dimension. (l x w x h): 8,000 x 4,000 x 2,450 mm, weight approx.: 5,000 kg
used
Description: ATTENTION: Location 97944 Boxberg- Windischbuch, Germany Very well maintained HOMAG Optimat BOF 311/60/K CNC processing center. Technical data: Workpiece length all aggregates - single loading max. 6.000 mm and pendulum loading max. 2.375 mm Workpiece length tool diameter with 25 mm - Single occupancy max. 6,175 mm and pendulum occupancy max. 2,550 mm Workpiece width all units - Front max. 1,450 mm and rear max. 1,700 mm Workpiece width tool diameter with 25 mm - Front max. 1,525 mm and rear max. 1,850 mm Workpiece thickness - Max. 300 mm incl. clamping device Clamping table Console with LED display in X and Y direction - Console length 1640 mm Main spindle 15 KW and speed 1.000 - 24.000 rpm - C-axis with interface for FLEX-5 (aggregate not included!) Drilling head MPU horizontal and vertikal S360° - MultiProcessingUnit with C-axis +/- 185° for drilling operations ...
used
Description: X-axis working surface: 4400 mm Y-axis working surface: 2100 mm vacuum pump automatic tool change motor power: 12 kW , control system: POWER PC CONTROL PC 85 x-motion: 4,400 mm, y-motion: 2,100 mm, control: POWER PC CONTROL PC 85, Approx. Onsite Dimension. (l x w x h): 6,200 x 2,400 x 1,000 mm, weight approx.: 4,300 kg
used
Description: With Homag workpiece feeder TBL 100/25/12/F and Ligmatech workpiece return unit ZHR 30L/155/F  , edge thickness: 3 mm, workpiece thickness: 12 -60 mm, feed: 18 m/min, gluing unit: Ja, snipping unit: Ja, rough trimming unit: Ja, fine trimming unit: Ja, profile trimming unit: Ja, universal milling unit: Ja, edge sanding unit: Ja, flat scraping unit: Ja, profile scraping unit: Ja, edge buffing unit: Ja, control: powerControl NC 21, return system: Ja, total power approx: 40 kW, Approx. Onsite Dimension. (l x w x h): 10,000 x 6,000 x 1,700 mm, weight approx.: 4,000 kg
used
Description: HOMAG KL 76/A20 Edge Bander (incomplete) Approx. Onsite Dimension. (l x w x h): 8,400 x 1,060 x 2,100 mm, weight approx.: 4,500 kg
used
Description: Flexline HOMAG PROFI KAL 330/6/A3/S2 edge banding machine  , , , serial number: 0-200-24-9153 is equipped as follows:  , , , HOMAG PROFI TBL 100/35/12 feed table with fully automatic workpiece feeding system WZ10 for workpieces with different dimensions in longitudinal and transverse direction Technical data: - Workpiece length 250 - 2500 mm - Electro-pneumatically controlled cross weigher - Air cushion table ( is not included in the scope of delivery )  , , , 2 HOMAG PROFI KAL 330/6/A3/S2 edge banding machine Technical data: - Universal trimming unit UF11, electro-pneumatically controlled  ,Note: the feedback is not included in the scope of delivery  , serial number: 0-200-24-9153, workpiece thickness: max.60 mm, feed: 18-25 m/min, joint trimming unit: Ja/Yes, snipping unit: Ja/Yes, fine trimming unit: Ja/Yes, pro ...
used
Working width: 1250mm, working height: 100mm, with scoring and milling aggregate, with control cabinet, without documentation, manufacturer unknown, either Homag or Bäuerle.
used
Description: serial number edgebander: 0-200-96-0454 supply 400 Y/230 V, 3 phases, 50 Hz maximum operating full load current 40 A fuse 50 A control voltage 24 V serial number return system: 0-284-96-1370 , supply 400 Y/230 V, 3 phases, 50 Hz maximum operating full load current 3,3 A fuse 16 A control voltage 24 V ATTENTION: Part marked in red NOT included Please also have a look at the pdf files of this machine  , serial number: 0-200-96-0454, Approx. Onsite Dimension. (l x w x h): 8,365 x 2,000 x 1,820 mm, weight approx.: 5,000 kg
used
Edge banding machine Minimum working width: 55 mm with workpiece thickness 22 mm 100 mm with workpiece thickness 60 mm Workpiece thickness 12-60 mm Workpiece overhang 30 mm Edge material strips 0.4 – 20 mm Edge material roll 0.3 – 3 mm Roll diameter max. 830 mm Conveyor chain 80 mm wide with rubber pad Workpiece support Scissor version with roller bearing, max. 1000mm extendable Speed 18 – 24 m/min Workpiece return conveyor Homag Ligmatech ZHR 15/30/L1 Year 1999 Weight 980kg Control – Software: HOMAG HOMATIC NC 21
used
WW: a1 user Brand Homag Machine number MR005603 Serial Number 0-200-21-4058 Maximum thickness of edge banding 3 mm Maximum thickness strips 20 mm Maximum panel thickness 65 mm Throughput 24 /min Pre-milling unit available Year of construction2000
used
Equipped with pneumatic connection; 6 pieces of spare saw blades; digital control; excluding extraction; is dismantled
used
Description: Technical data: tape thickness: 0.3 - 3 mm material thickness: 8 - 60 mm conveyor speed: 18 - 25 m / min The edgebander consists of the following aggregates: • 2 pre-milling machines for material processing (3 kW each) • material heating lamp • glue heating vessel • container with roller for applying glue to the material • push rollers • 2 stripping units (each 0.8kw) • 2 units with radial cutters for processing the upper and lower edges (1.5 kw each) • 2 postforming aggregates • 2 cyclings • polishing brushes with liquid injectors The edging is fully automated, which means that the height of the beam, pre-milling machines, rollers and all the settings of the cutter depending on the thickness of the material and the strip are adjusted on the main monitor. serial number: 0-200-19-0792, edge thickness: 0.3 - 3 mm, workpiece thickness: 8 - ...
used
Panel thickness: 12 - 60 mm Feed speed: 18 - 24 m/min Edge thickness: 0,4 - 3 mm for coil edges, 0,4 - 20 mm for strips / solid wood Equipment: Help carriage feeding the panels rectangular automatic fence at the infeed Squaring device: 2 x 3,0 KW Panel edge pre-heater Hot melt unit: QA34 / A20 edge magazine Lateral pressure rollers, thickness programmable, 1 driven, 6 non-driven rollers End trims HL83, programmable change straight/chamfer, 2 motors 0,5 kW Rough trimming: 2 x 1,5 KW Top/bottom fine trimming, tilting, 2 x 0,4 kW Contour trimming FK 13, 2 x 0,4 KW, with 8-fold toolchangers Universal milling motor 4kW Profile scrapers Flat scrapers Buffing unit with oscillation Controlls: HOMATIC NC16
used
This HOMAG BAZ20/50/16/K Wood working machine was manufactured in the year 1998. It is equipped with a PC 85 mit SPS control unit. The machine has a spindle speed of 17500 rpm.
used
Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor, electric motor -Power: 1.5 kW 12000 rpm at 200 Hz -Holding shaft: Ø 16 mm -Dimensions: 380/75/H160 mm -Weight: 8kg
used
Number of spindles: 6 St. Working width: 250 mm Working height: 160 mm Length of the planing table: 2500 mm Feed motor: 4 kW Feed speed: 6 bis 24 m/min. Dimensions (L/W/H): 4800x1900x2150 mm weight of the machine ca.: 5400 kg Control: powerControl HOMAG Moldteq M-300 (OPTIMAT LPP-306) -------------------------------------- Four-sided planer in window version with electronic axial and radial adjustment of the spindles. Advantages: -------------------------------------- - Flexibility thanks to variable feed and adjustable spindle speed - Intuitive machine operation via powerTouch2 - Quick setup using proLock spindle clamping - High precision thanks to solid cast iron stand - Ideal power transmission as each spindle has its own motor is driven Technical data short version -------------------------------------- Number of spindles: 6 Working width: 250 mm Working height: 160 mm Dressing table ...
used
Edge closure for edge banders, edge banding machines -Manufacturer: Homag -for: 2x different edges -Number: 1x edge closure available -Price: per piece -Dimensions: 670/360/H350 mm -Weight: 43 kg/piece
used
Control card, output card, control, edge banding machine, edge banding machine -Manufacturer: HOMAG HOMATIC -Type: 2-083-01-5406/07 -Type: 2083015406/07 -Number: 1x control cards available -Price: per piece -Dimensions: 20/190/H260 mm -Weight: 0.31 kg
used
Finishing unit, buffing unit, modular unit kit, format processing unit, double-end profiler, edge processing machine, after the scraper for edge processing machine -without: drive motors -HOMAG finishing unit: for cleaning agent application with buffing device for disposal of glue residue on PVC edges -with: oscillation -Swiveling -Number: 3x units available -Price: per piece -Dimensions: 400/160/H225 mm -Weight: 5.7 kg
used
Control card, input card, control, edge banding machine, edge banding machine -Manufacturer: HOMAG HOMATIC -Type: 2-083-01-5102/5103 -Type: 2083015102/5103 -Number: 1x control cards available -Price: per piece -Dimensions: 20/190/H260 mm -Weight: 0.275 kg
used
Control card, input card, control, edge banding machine, edge banding machine -Manufacturer: HOMAG HOMATIC -Type: 83.51 -Type: 83 51 -Number: 1x control cards available -Price: per piece -Dimensions: 20/190/H260 mm -Weight: 0.275 kg
used
PC-CPU, control card, output card, control, edge banding machine, edge banding machine -Manufacturer: HOMAG HOMATIC -Type: PC-CPU-2-083-01-5003 -Type: PC-CPU 2083015003 -Number: 1x control cards available -Price: per piece -Dimensions: 20/195/H265 mm -Weight: 0.31 kg
used
Control card, output card, control, edge banding machine, edge banding machine -Manufacturer: HOMAG HOMATIC -Type: 2-083-01-5905 -Type: 2083015905 -Number: 1x control cards available -Price: per piece -Dimensions: 130/365/H30 mm -Weight: 0.58 kg
used
Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG milling unit can be rebated, grooved and profiled -with keying: from 2 sides each -Milling unit: swiveling -2x engines Perske -Power: 0.3 kW -Voltage: volts -Frequency: Hz -Speed: 18000 rpm -Other engines with other services in stock for an additional charge -Dimensions: 520/470/H600 mm -Weight: 64 kg
used
Linear drive, linear gear, screw jack, spindle drive -comes from a Homag edge banding machine -difficult execution -Adjustment path: 100 mm -Number: 2 pieces available -Price: complete for 2 pieces -Dimensions: 250/230/H800 mm/piece -Weight: 66 kg/piece