GILDEMEISTER used machine for sale

Control Siemens 840D - Powerline Rotary diameter. [mm] 640 Turning length [mm] 1500 Main spindle: Motor spindle technology Speed 4,000 rpm Power 45 kW Torque 750 Nm Bar passage 90 mm C-axis 0.001° Workpiece clamping 3-jaw chuck, Röhm KFD-HS 315/3 Sub-spindle: Motor spindle technology Speed 4,000 rpm Power 45 kW Torque 750 Nm C-axis 0.001° Bar passage 90 mm Workpiece clamping 3-jaw chuck, Röhm KFD-HS 315/3 Travel in Z 1,500 mm Tool carrier I (X/Y/Z/B): Technology Milling spindle on cross slide Speed 12,000 rpm Power 22 kW Torque 100 Nm Tool holder HSK-A63 B-axis 0.001° Swivel range +/- 120° Travel in X/Y/Z 550/220/1,585 mm Tool carrier II (X/Z): Technology Turret with 12 stations Tool holder VDI40 Tool drive 4,000 rpm, 10.7 kW, 32 Nm Travel in X/Z 225/1,400 mm General: Tool Magazine Shelf Magazine, 120-fold

GILDEMEISTER CTX 320 linear V6 Turning-milling centre with complete equipment Year of construction: 12/2002 Control: SIEMENS 840D POWERLINE Machine number: 937060 Spindle hours: only approx. 18,245 (as of 06.05.24) Equipment: Main and counter spindle Y-axis C-axis Turret with 12 driven tool stations approx. 10 pieces of driven tools approx. 25 VDI recordings 2 pieces of collet chuck approx. 30 collets Parts Conveyor Belt Parts collector Probe Main Spindle Probe counter spindle bar feeder LNS QUICK LOAD SERVO III 2 Foot Switches Operating Instructions/Documentation All other accessories shown in the photos and video are not included in the scope of delivery, therefore not part of this sale. The scope of delivery only includes the accessories that are expressly listed here, in the order confirmation and invoice. More photos on request. Equipment, technical ...

CNC lathe GILDEMEISTER CTX 210 With control Siemens 840 D Shop Turn Year of construction: 2007 Circulation diameter over bed track cover 380 mm Travel in X: 160 mm Travel in Z: 305 mm Spindle bore: 56 mm Speed range: 20 – 6000 rpm With the following accessories: Slide protection with interior lighting 12-speed turret with 12 driven tool stations 2 driven tools VDI 30 12 tool holders VDI 30 Tool measuring device Tailstock with quill 3 jaw chuck hydraulic SMW Autoblok 0 140 mm with foot switch Coolant system Chip Sweeping Gun Operating instructions THE MACHINE IS IN MINT CONDITION THE MACHINE COMES FROM A VOCATIONAL SCHOOL DUTY HOURS: 258 HOURS PROGRAM RUN: 39 HOURS

Key data: 210 mm, 580 mm, 5000 1/min

Condition of the machine: The machine is currently still in production and powered by the original owner. The CTX 310 is in very good mechanical condition, running in small parts production with light machining (11834 spindle hours). The machine can be viewed under power in our warehouse, probably from the end of May/beginning of June. 07 Machine Accessories: - Control Heidenhain IT-Plus -Conveyor - Driven tools and tool holders (used) - 1 piece of jaw lining with used jaws - Parts catcher - C-axis, X-axis and Z-axis - Tailstock MK4 with hydr. Clamping (Footswitch) - 4 driven tools (2 brackets and 2 front holders) - Tool holder VDI30

Key data: 680 mm, 635 mm, 5000 1/min

Condition of the machine: The machine is currently still in production and powered by the original owner. The CTX 420 is in very good mechanical condition, running in prototype construction with light and small machining (9981 spindle hours). The machine can be viewed in our warehouse under power, probably from the end of May Accessories Machine: - Control SIEMENS 840D Powerline with SHOP TURN - Suction (see picture) -Conveyor - Driven tools and tool holders (used) - 1 cheek lining - 1 collet chuck - Parts catcher with outfeed conveyor - C-axis, X-axis, Z-axis and Y-axis - Tailstock MK4 with hydr. Clamping (Footswitch) - 10 swivel holders - 8 pcs. normal angle holders - 6 driven tools (3 brackets and 3 front holders)

Control Heidenhain Plus IT with Turn Plus Turning diameter max. circulation 520 mm Turning length 1175 mm Cross slide at the top with turning/milling spindle as motor spindle, mounting HSK 63A Main / Counter Spindle C-axis Y-axis ±90 mm B-axis ±120° 12-speed turret with driven tools Tool disc magazine 1 x 36-speed Tailstock Conveyor Weight 15 t

Gildemeister CTX 410 Year of construction: 2004 Controls: Heidenhain CNC lathe Travel: x-travel 250 mm z-travel 635 mm Max. turning length: 600 mm Circulation diameter over bed: 505 mm Circulation diameter over face slide: 365 mm Spindle bore: 87 mm Max. chuck diameter: 250 mm Max. torque: 320 Nm Max. tailstock displacement by hand/self-acting: 580 mm Tailstock mount/stroke: MK4/580 mm Area requirement (LxWxH): 6.5 m x 4.0 m x 1.8 m Weight: 4500 kg

Gildemeister Sprint 65 Linear CNC lathe (with 2nd spindle, 3 turrets and Y-axis) Diameter of spindle bore 65 mm Spindle speed 5,000 rpm Spindle motor 25/20 kW Spindle speed counter spindle 5,000 rpm X-axis movement 165 / 165 / 165 Movement Y-axis 80 mm Z-axis travel 220 / 150 / 650 mm Movement of the W-axis (counter spindle to the main spindle) 690 mm C-axis indexing 0.0001° Number of towers 3 Number of tools on turret 12 (3x 12) Tool cone VDI 30 Bar Feeder LNS Quick Load Servo 65 If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other listings for a full overview of our stock.

Gildemeister Sprint 65 Linear CNC lathe (with 2nd spindle, 3 turrets and Y-axis) Diameter of spindle bore 65 mm Spindle speed 5,000 rpm Spindle motor 25/20 kW Spindle speed counter spindle 5,000 rpm X-axis movement 165 / 165 / 165 Movement Y-axis 80 mm Z-axis travel 220 / 150 / 650 mm Movement of the W-axis (counter spindle to the main spindle) 690 mm C-axis indexing 0.0001° Number of towers 3 Number of tools on turret 12 (3x 12) Tool cone VDI 30 Bar Feeder LNS Quick Load Servo 65 If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other listings for a full overview of our stock.

Control Siemens ... Sinumerik 840 D Turning diameter ... 365mm Rotation length ... 450mm Inclined bed Spindle bore ... 52mm Tool turret ... 12/6 Spindle speed ... 0-6000/min. Main engine power ... 12/16kW Axis C ... 360° Max. rod diameter ... 60mm L x W x H ... 4000 x 1640 x 1730mm Machine weight ... 3500kg The machine is in good condition, possible to test under electricity.

Refurbished 1992 Tapping Multi-edge hammering 1x threaded rods 2x threaded spindles Bar feeder Giovanni Cucchi DBMF 26 (YOC 2001) Lots of accessories

Control Siemens ... Sinumerik 840 D Turning diameter ... 400mm Rotation length ... 600mm Inclined bed Axis Y ... 64mmmm Counter spindle Spindle bore ... 51mm Driven Tools Bar feeder Machine weight... 3700kg Number of spindle deer ... 0-6000/min. Axis X ... 160mm The machine is in good condition, possible to test under electricity.

Key data: 324 mm, 600 mm

CNC lathe GILDEMEISTER CTX 420 linear V 3 With control Heidenhain ELTROPILOT 4290 Year of construction: 2003 Max. rotatable diameter: 324 mm Max. rotatable length: 600 mm Max. circulation diameter: 680 mm Spindle bore: 79 mm Max. spindle speed: 4500 rpm With the following accessories: Slide protection with interior lighting 12-speed turret with 12 driven stations 50 tool holders VDI 40 5 driven tools VDI 40 1 pc Hydraulic Lynette Tailstock with quill Conveyor Hydraulic jaw chuck Forkardt 0 250 mm Foot switch for jaw chuck + tailstock adjustment Coolant device 210 l ( 20 l/min ) 6 bar Operating instructions

Turning diameter 80 mm Bar diameter 20 mm Spindle speed 10000 rpm X1, Y1, Z1, X2,Z2 axes Controller Fanuc FANUC 160iB LNS barfeeder

Turning diameter 380 mm Turning lenght 330 mm Spindle bore 56 mm Spindle speed 6000 rpm Controller Fanuc 32i

- 6 spindles - Guide tubes Equipment according to pictures Available from week 20/2024

Cycle-controlled lathe GILDEMEISTER NEF 720 With control MANUAL PLUS 4110 Year of construction: 2001 Spindle bore: 92 mm Center width: 1500 mm Circulation O above bed : 710 mm Circulation O over face slide: 410 mm Center height: 350 mm Speed range: 36 – 1800 rpm infinitely variable With the following accessories: Slide protection with interior lighting Multifix Tool Holder Coolant system 3 jaw chuck Forkhardt 0 315 mm ICP Contour Programming Tailstock with extendable drill quill Chip pan Operating instructions

Key data: 320 mm, 750 mm

Manufacturer: Gildemeister Model N.E.F. 320 K Year of construction 2004 Condition Used Siemens control system Specifications Circulation diameter 320 mm Turning length 750 mm Speed range - main spindle 3500 rpm Drive power - main spindle 9 kW Bar diameter 50 mm Tool holder Multifix size B Tailstock mount MK 5 Rapid traverse X / Z 8 / 10 m/min Machine weight approx. 2.5 t Space requirement approx. 2500 x 1800 x 1885 mm Accessories: 3 Jaw chuck Forkardt 200 Tool package Documentation

Key data: 520 mm, 625 mm, 5000 1/min

Manufacturer: Gildemeister Model CTX 420 V 3 Year of construction 2004 Condition Used Control Heidenhain iT Specifications Circulation diameter 565 mm Turning length 625 mm X-travel 260 mm Speed range - main spindle 25 - 5000 rpm Drive power - main spindle 25 kW Max. torque 270 Nm Spindle nose 170h5 Rod diameter 65 mm C-axis 0.001° Revolver Stations 12 pos. Tool holder VDI 40 Driven tool stations 12 pos. Speed driven tools 4500 rpm Drive power driven tools 12 kW Max. torque 27 Nm Tailstock mount MK 4 Rapid traverse X / Z 60 / 45 m/min Total power requirement 55 kVA Machine weight approx. 6.0 t Space requirement approx. (without bar feeder) 3495 x 2484 x 1885 mm Accessories/Equipment Bar feeder 3200 mm Iemca Master 880 MP-E Conveyor Parts catcher Conveyor belt C-axis Driven tools Collet Chuck Hainbuch 3 Röhm jaw chuck Too ...

Key data: 225 mm, 640 mm, 4000 1/min

1 pc used CNC lathe Make: Gildemeister Model : CT 40 Control: EPL 2 Built in 1987 Switch-on hours: 2250 hours Specifications Circulation over bed 400 mm Turning length 640 mm Turning diameter 225 mm Spindle size, flat flange 140h5 Spindle bore 72 mm Drive power 11 kW Speed range, infinitely variable 20-4000 min Z-rapid traverse/feed speed 10/5 m/min. X-rapid traverse/feed speed 10/5 m/min. Recording VDI 30 Number of tool positions 12 Length x Width x Height 3260x1720x1650 mm Machine weight 3400 kg Accessories: Hand chuck Documentation

CNC lathe GILDEMEISTER CTX ALPHA 300 with bar feeder and parts pick-up device Built in 2010 in good condition. Duty Cycle: 22930 Hours: 7326 Control Heidenhain CNC-Pilot 640 Circulation over bed: 380 mm Circulation via face slide: 290 mm Spindle bore: 73 mm Flat travel ( X ) : 190 mm Longitudinal travel ( Z ) : 335 mm Speed max. 6000 rpm C-axis 360° Number of driven tool stations 12 pos. Tool holder VDI 30 Accessories: 3 jaw chuck hydraulic 170 mm Conveyor Coolant system Hydraulic hollow clamping device Tool drive C-axis Parts pick-up device Bar Feeder Irco RBK10012 Tailstock

CNC lathe Gildemeister CTX 400-Series 2 - Control/Heidenhain CNC Pilot - Max. circulation diameter / face carriage 470 mm - Max. circulation diameter / bed 570 mm - Max. turning length 600 mm - Infinitely variable speed 25-5000 rpm - Rapid traverse 20/24 m/min - Spindle bore approx. 79mm - Chuck diameter max. 250mm - Disc turret - Cross-section max. 20/20mm - Morse taper tailstock MK4 -Conveyor 9oxqtvdvxq Dimensions approx. LxWxH 5.5x2.5x1.7 meters Weight approx. 5700 kg

Controller FANUC 16i-TB Main and counter spindle: max. rod diameter 12 mm max. speed 12,000 1/min Travel: X1 (linear)= 30, Y1= 195, Z1= 120 mm Y2= 180, Z2= 180 mm Tool holder 1: 5 tools, 4 of which are driven Tool holder 2: 8 Tools Bar feeder FMB minimag 3200

Year of construction 2007 Control Siemens 840D Rotational diameter. [mm] 640 Turning length [mm] 1500 Main Spindle: Motor Spindle Technology Speed 5,000 rpm Power 35 kW Torque 370 Nm C-axis 0.001° Bar passage 65 mm Workpiece clamping 3-jaw chuck, Schunk ROTA NCF plus 315-104 Counter spindle: Motor Spindle Technology Speed 5,000 rpm Power 35 kW Torque 370 Nm C-axis 0.001° Bar passage 65 mm Workpiece clamping 3-jaw chuck, Schunk ROTA NCF plus 315-104 Travel in Z 1,500 mm Tool carrier I (X/Y/Z/B): Technology Milling spindle on cross slide Speed 12,000 rpm Power 22 kW Torque 100 Nm Tool holder HSK-A63 Travel X/Y/Z 550/220/1,585 mm Rapid traverse in X/Y/Z 40/24/70 m/min B-axis 240° Tool carrier II (X/Z): Technology Star turret with 12 stations Tool holders VDI40 Tool drive 4,000 rpm, 10.7 kW, 32 Nm Travel in X/Z 225/1,400 mm Rapid traverse in X/R  ...

Key data: 205 mm, 650 mm

For sale: Gildemeister CNC lathe type Sprint 65 Linear equipped with a Fanuc 310I control. This CNC lathe is equipped with 2 equal spindles with a bar passage of 65 mm. The machine also has three turrets with 12 positions where you can place driven holders in any position! The upper turret is equipped with a Y-axis with a displacement of 80 mm ( (+50, - 30 mm). The turning diameter is 205 mm. The maximum turning length is 650 mm. The movement X1, X2, X3 is 165mm, the Z1 axis movement is 220mm, the Z2 axis movement is 150mm, and the Z3 axis movement is 768mm. The W2 axis movement is 690 mm and the maximum rapid traverses are 30 meters/min. The maximum speed of both spindles is a speed of 5,000 rpm and both spindles have a full C-axis. The tool holder holder on all turrets is VDI-30. The machine is also equipped with a hinged belt chip conveyor with right ejection and the machine has an Ir ...

- Control: FANUC 32i - max. rod Ø: 65 mm - Turret with 12 stations (not driven) - Speed 5,000 1/min -Tailstock -Conveyor - without air filter - Bar feeder TOP-Automazioni XF 475 - Max. bar length 4,200 mm

Universal lathe GILDEMEISTER NEF 320 K With Siemens SINUMERIK 810 DE CONTROLLER (SIMATIC PANEL TOUCH SCREEN) Year of construction: 2001 Spindle bore: 52 mm Center width: 750 mm Circulation O above bed : 320 mm Circulation O over face slide: 150 mm Flat travel : 185 mm Speed range: 14 – 3550 rpm infinitely variable With the following accessories: Slide protection with interior lighting Multifix Tool Holder Coolant system 3 jaw chuck 0 200 mm Tailstock with retractable quill Chip pan Operating instructions THE MACHINE WAS ONLY USED FOR APPRENTICESHIP TRAINING THE MACHINE IS IN VERY GOOD CONDITION

Key data: 700 mm

CNC lathe GILDEMEISTER CTX gamma 1250 With control control Siemens 840 D SL with Shop Turn Year of construction: 2009 Travel in X: 480 mm Travel in Z: 1300 mm Spindle bore: 102 mm Turning diameter max. 700 mm Speed range: max. 2500 rpm With the following accessories: Slide protection with interior lighting (automatic sliding hood operation) 12-speed turret with 12 driven tool stations 50 tool holders VDI 50 3 Driven Angle Heads, 2 Driven End Heads C Axis & Spindle Brake (Hydr.), Partial Hollow Clamping Device Tension Tube 104 mm 3 Jaw chuck SMW Autoblock hydraulic (0 500) Direct Displacement Measuring System (X Axis) Tailstock with quill Signal light 4 coloured DMG Netservice on board Coolant system 980 l 8/20 bar with belt filter system Conveyor Coolant spray gun Operating instructions

Cycle-controlled lathe GILDEMEISTER NEF 520 With control MANUAL PLUS 4110 Year of construction: 2005 Spindle bore: 70 mm Center width: 1000 mm Circulation O above bed : 500 mm Circulation O over face slide: 290 mm Center height: 250 mm Speed range: 10 – 3050 rpm infinitely variable With the following accessories: Slide protection with interior lighting 8-speed Sauter Revolver VDI 30 30 VDI 30 tool holders 2 driven tools VDI 30 1 collet chuck Coolant system 3 jaw chuck Röhm 0 250 mm 19 set of soft jaw inserts ICP Contour Programming Tailstock with extendable drill quill Chip pan Operating instructions

Matching bar feeder DMG S Loader, year of construction 2010 unused, lateral sliding device. ( original price at that time 18000,- EUR) Bought for a Guildmaster CTX 310 but never used it.