GEHRING used machine for sale

Inv. Num. : 6549 Type: KS 1800-10 Producer: Gehring Generated: Parameters: Honing diameter: 10 mm Machining length: 1800 mm

Max. spindle rotational speed: 1430/min, spindle power: 1.5kW, connected load: 14kW, including documentation.

Still to be viewed at the Neuss site under power - dismantling expected in May 2024, Make Gehring, type ZZ1500-2, Identnr. 720/703, PLC control, made by Siemens type Simatic HMI Touch, spindle stroke up to stand 500 mm, speed range 28 - 192 rpm, feed rate 0-20 m/min., conversion in 2022, Attention! This machine has already been dismantled and is in storage.

honing diameter:90 mm stroke:600 mm ConRod

honing diameter:63 - 180 mm stroke:15 - 600 mm throat:xxx mm stroke speed:0 - 24 m/min distance table - lower edge spindle:1545 - 2145 mm spindle speeds::24 - 128 1/min. spindle diameter:75 mm feed:EMZ-F/HAZ Do 80 dimensional control:Marposs GCU/AP11 Verticval Honingmachine - machined Cyliner Liner - out of OEM Line. NC Control GEHRING II, Siemens S7-300 SPS 2003 retrofit

honing diameter: 40-420 mm stroke: 15-6500 mm centre height: 520 mm workpiece length: 6500 mm workpiece dia.: 1000 mm steady: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

honing diameter: 160 mm stroke: 3025 mm centre height: 325 mm workpiece length: 3000 mm workpiece dia.: 600 mm steady: spindle drive: 32-250 U/min stroke speed: 0-20 m/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

honing diameter: 24-160 mm stroke: 500 mm throat: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Stroke length: 600 mm Honing diameter range: 3 - 90 mm Spindle drive: Servomotor RPM, max: 4500 1/min Torque: 60 Nm Stroke drive: Ball screw Stroke speed, max: 40 m/min Stroke acceleration, max: 25 m/s? Gehring precision honing spindle, 6 stations round table, Gehring digital honing control, incl. fault diagnosis, with free programmable controller Siemens S7-300. Spindle feed EMZ-F,

Honing diameter maximum: 0 mm Honing diameter minimum: 0 mm Stroke length: 0 mm Number of honing heads: 0   CNC Brand: 0 CNC Model: 0 Technical data Min. diameter: 25 mm Max. diameter: 90 mm Max. honing length: 250 mm Number of spindles: 1 Voltage 50 Hz 3x: 380 Volt Overall dimensions machine: Length: 1400 mm Width: 1200 mm Height: 2600 mm

honing diameter: 12 mm stroke: 40 mm throat: mm total power requirement: 15 kW weight of the machine ca.: 5 t dimensions of the machine ca.: m 3 spindle honing machine with in process measuring The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

honing diameter: 80 mm stroke: 280 mm throat: 300 mm total power requirement: 6 kW weight of the machine ca.: 2,6 t Honing Ø 10 - 100 mm Max. honing depth, approx. 250 mm Max. spindle stroke 260 mm Distance between spindle and column 300 mm Mounting height 1,000 mm Table size 350 x 500 mm Height of table above floor 500 mm Spindle speeds in 2 steps, infinitely variable, approx. 85 - 300 rpm 170 - 600 rpm Stroke speed, infinitely variable, hydraulic 0 - 23 m/min Spindle drive 2 kW Total electrical load 6 kW - 380 V - 50 Hz Weight 2,600 kg Accessories / Special Features Built-on 2-station tilting table which accommodates 2 workpieces. Mechanical workpiece clamping, using a manual lever. Hydraulic infeed of the tool. Switch-off via timer. Air measuring device (probably). Honing oil unit. Various splash shields, etc. Condition : Good. Machine can be in ...

honing diameter: 5-10 mm stroke: 40 mm throat: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m 2 station rotary table The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

honing diameter: 125 mm stroke: 350 mm throat: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Two step expansion for pre and finish honing Air gauge measuring Fixture for honing a 4 cylinder block Die Werkzeugmaschine entspricht zum derzeitigen Zeitpunkt nicht den grundlegenden Sicherheits- und Schutzanforderungen wie in der BetrSichV 2015 genannt. Eine Anhebung des erforderlichen Mindest-Schutzzieles ist mittels einer Gefährdungsbeurteilung nach BetrSichV zu ermitteln. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.