We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
Model
(Manufacturer: ESAB)
used
used
Description: Electrode welding machine incl.: Electrode cable, ground cable and Shoulder strap Welding current 10 - 180 A Connection voltage 230 V Weight 10kg Dimensions LxWxH 400 x 200 x 300 mm weight approx.: 10 kg, Approx. Onsite Dimension. (l x w x h): 400 x 200 x 300 mm
used
Description: Electrode welding machine including: Electrode cables Ground cable 4m Shoulder strap Welding current 10 - 180 A. Connection voltage 230 V Weight 6.8 kg Dimensions LxWxH 400 x 150 x 270 mm weight approx.: 7 kg, Approx. Onsite Dimension. (l x w x h): 400 x 150 x 270 mm
used
current intensivity: 315 A, weight approx.: 200 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 1,700 mm
used
Suprarex 3500 (width 3500mm) with plasma M3 of the second generation (G2) and with WIC (water clearance for the possibility of cutting under water). The machine was bought mainly for cutting stainless steel. Of course, it can also cut carbon steel or aluminum (it can only be cut separately). Basic consumable parts for the burner are also included. The machine was practically never used and cut for a total of 1 hour (started up and tested).
used
This ESAB Suprarex SXE 5000 Plasma Cutting Machine was manufactured in the year 2012 in Germany. It is equipped with a ESAB control unit with english main language. This machine has a Kjellberg main drive. It can be included 2 Kjellberg HiFocus 280i Plasma Sources and 2 Kjellberg KWE 360 Hot Wire Units with the machine.
used
This ESAB SXE-P14500 SUPRAREX Plasma Cutting Machine was made in 2008. It is equipped with an ESAB Vision 52 control unit.
used
This ESAB Suprarex SXE-HD 3500 Plasma Cuttting Machine was manufactured in the year 2014 in Germany and has 10 production hours.
new
welding current: 5 - 160 A connected load frequency: 230 V weight: 7,9 kg Dimensions (LxWxH): 310 x 140 x 230 mm Scope of delivery: TIG welding machine Buddy TIG 160 Electrode and earth cable 3m TIG torch ET 17 4m Gas hose with union nut The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Stack electrode 5.0 x 450 -Type: OK 48.00 -Weight per package: 6.3 kg
used
Stick electrodes 4.0 x 450 -Type: OK 48.00 -Price: per package -Number: 2 packages available -Weight per package: 6.2 kg
used
Stack electrode 4.0 x 350 -Type: OK50.40 -Weight per package: 4.4 kg
used
Stick electrodes 3.2 x 350 -Type: Navalend 81 -Price: per package -Number: 2 packages available -Weight per package: 5 kg
used
Stick electrodes 3.2 x 350 -Type: Navalend 25 -Price: per package -Number: 2 packages available -Weight per package: 5.3 kg
used
Stick electrodes 3.2 x 350 -Type: OK 63.31 -Weight: package 3.1 kg/79 pieces -Package: not full
used
Stack electrode 4.0 x 450 -Type: OK Selectrode 83.28 -Weight per package: 5.8 kg
used
Stick electrodes 4.0 x 350 -Type: OK 63.30 -Price: per package -Number: 2 packages available -Weight per package: 4.6 kg
used
Stick electrodes 3.2 x 350 -Type: OK 63.31 -Price: per package -Number: 4 packages available -Weight per package: 1.8 kg
used
Plasma hose package, welding torch, MIG/MAG torch -ESAB type: PSF 410 Cw -Hose package: water-cooled -Spring contact -Length: 3.25 m -Price: per piece -Number: 2 pieces -Weight: 3.2 kg
used
Flame cutting machine, torch, oxy-fuel cutting machine -Shaft diameter: 30 mm -Shaft length: 220 mm (260 mm with sleeve) -Total length: 405 mm -for: 16 mm nozzle diameter -Weight: 1.3 kg
used
wire electrode, welding wire, welding wire -Net weight: 9 kg -Number: 1x packages available -Price: per package -Weight complete: 9.5 kg/package
used
Welding rectifier, electrode welding device, electrode welding machine, electrode welding rectifier -Manufacturer: ESAB, welding rectifier type Origo Arc 410c -Welding power: max. 400 A -Welding cable with electrode clamp -Ground cable -Quantity: 1x welding machine available -Price per piece -Dimension: 920/720 / H930 mm -Weight: 182 kg / pc.
used
TIG welding rod, welding wire Universally applicable TIG welding rod for root and joint welding on unalloyed and low-alloy steels, general structural steels, fine-grain structural steels and pressure vessel steels, Suitability tested down to -40 °C. -net weight: 5 kg -Number: 7x package available -Price: per package -Weight complete: 5.3 kg/package
used
wire electrode, welding wire, welding wire -Welding wire: Filarc PZ6125 -Diameter: 1.2mm -Dimensions: O 300 /100 mm -Weight roll: 16 kg
used
ESAB SXE-PI 3500 LH PT-24 plasma / oxy-fuel cutting system N.3 TORCHES AND N.1 PLASMA TORCH CUT FROM mm 1 TO mm 200 MAX SHEET 2500x3000
used
The machine is available for immediate delivery. The suction table is not included.
used
An annual (bought new in 2021) ESAB migomat for sale. We sell due to the liquidation of the production workshop. A great, almost new machine, used by us for welding aluminum and steel sheets and sections. The machine is designed for an intensive work cycle - for work that requires long operation. The device is complete (with a handle - 1 pc, coolant, mass cable, etc. - without gas cylinder), ready to work. Possibility to see / check.
used
Ref. -No.: 10195 Manufacturer: ESAB Storage location: Halberstadt Country of origin: Schweden serial number: 620-703-3544
used
E-welder ESAB type LTG 250 Rod electrode welder Masch. No. 736-820-387 Year of construction 1997 Power 250 Amp. = 35 % ED 190 Amp. = 60 % ED 150 Amp. = 100 % ED Power adjustment: infinitely variable - electrode holder with 6 meters connection cable - DC fan - air cooling - possibly also TIG welding possible, without hose package Mains connection 380 Volt, 50 Hz, 32 Amp. Plug Space requirement L x W x H 1200 x 750 x 1050 mm Weight 180 kg good condition Device was originally also designed for TIG welding. The hose package for TIG welding is not available and the function has not been tested. The water cooling was for the hose package for TIG welding. The device is therefore sold only as an electrode welding machine.; used
used
CNC flame cutting machine make ESAB type Numorex NXB 6500Machine -No: 89022, built in 1989Track width: 6500 mmTrack length: 12000 mmCutting table height: 700 mmNumber of burners: 6 oxy-fuelType of control: CNC 510With- Extraction systemused, from large company, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools