ENGEL used machine for sale

- ENGEL ER-IS Interface. - Prepared for CC300 Control - Compatible with machine: VC from 28 to 220t EM from 30 to 160t EMC from 50-180t - 1 x vacuum circuit - 1 x compressed air circuit - Compatible machine: VC88-220, EM30-160, EMC50-180 t - Stroke (X): 400 mm - Stroke (Y): 800 mm - Stroke (Z): 1.400 mm - Payload: 5 Kg - Driving method: X, Y, Z: servo, C: pneumatic

Used machine in good condition. Available for immediate delivery. - Air Valves: n/a - Distance between tie-bars (h x v): 460 x 410 mm - Screw diameter: 25 mm - Shot weight max: 54 g - Injection rate: 108 cm?/s - Injection pressure: 2.400 bar - Injection volume: 59 cm? - Screw L/D ratio: 24,8 - Nozzle stroke / force max.: 225 / 28 mm / kN - Clamping force: 1.000 kN - Mould opening stroke max: 350 mm - Mould height max: 450 mm - Mould height min: 150 mm - Daylight between platens max: 800 mm - Platen size (h x v): 650 x 600 mm - Cascades / Sequential valve gates: n/a - Heating zones: 4 2 - Control: CC200 - Core pulls: n/a - Oil tank capacity: - l - Operating hours: 16.280 - Power: installed max: 22 kW - Weight: 4.500 kg - Dimensions (long x wide x high): 4.300 x 1.300 x 1.900 mm

Used machine in good condition. Available for immediate delivery. - Screw diameter: 45 mm - Shot weight max: 293 g - Injection rate: 230 cm?/s - Injection pressure: 2.360 bar - Injection volume: 318 cm? - Screw speed: 230 rpm - Nozzle stroke / force max.: 350/67 mm / kN - Ejector stroke / force max.: 200/83 mm / kN - Clamping force: 3.000 kN - Mould opening stroke max: 850 mm - Mould height min: 350 mm - Daylight between platens max: 1.200 mm - Platen size (h x v): 1050 x 650 mm - Mold opening force: 196 kN - Control: CC100 - Oil tank capacity: 810 l - Power: installed max: 55 kW - Dimensions (long x wide x high): 6.700 x 2.000 x 2.300 mm - Weight: 21.000 kg

Used machine in good condition. Available for immediate delivery. - Screw diameter: 25 mm - Clamping force: 1.200 kN - Shot weight max: 63 g - Injection rate: 104 cm?/s - Injection pressure: 2.400 bar - Injection volume: 69 cm? - Screw speed: 550 rpm - Screw L/D ratio: 24,8 - Nozzle stroke / force max.: 200 / 28 mm / kN - Ejector stroke / force max.: 130 / 40 mm / kN - Mould opening stroke max: 500 mm - Mould height min: 300 mm - Daylight between platens max: 800 mm - Platen size (h x v): 740 x 470 mm - Mold opening force: 38 kN - Control: CC200 - Oil tank capacity: 300 l - Power: installed max: 22 kW - Weight: 7.200 kg - Dimensions (long x wide x high): 4.400 x 1.500 x 2.000 mm

Used machine in good condition. Available for immediate delivery. - Screw diameter: 25 mm - Clamping force: 1.200 kN - Shot weight max: 63 g - Injection rate: 104 cm?/s - Injection pressure: 2.400 bar - Injection volume: 69 cm? - Screw speed: 550 rpm - Screw L/D ratio: 24,8 - Nozzle stroke / force max.: 200 / 28 mm / kN - Ejector stroke / force max.: 130 / 40 mm / kN - Mould opening stroke max: 500 mm - Mould height min: 300 mm - Daylight between platens max: 800 mm - Platen size (h x v): 740 x 470 mm - Mold opening force: 38 kN - Control: CC200 - Oil tank capacity: 300 l - Power: installed max: 22 kW - Weight: 7.200 kg - Dimensions (long x wide x high): 4.400 x 1.500 x 2.000 mm

Used machine in good condition. Available for immediate delivery. - Screw diameter: 90 mm - Injection pressure: 1.919 bar - Injection volume: 2.740 cm? - Screw L/D ratio: 20 - Ejector stroke / force max.: 300 / - mm / kN - Clamping force: 8000 kN - Mould opening stroke max: 1.350 mm - Mould height max: 2.000 mm - Mould height min: 650 mm - Platen size (h x v): 1.570 x 1.480 mm - Distance between tie-bars (h x v): 1.025 x 935 mm - Core pulls: 5 - Operating hours: 62.870 - Dimensions (long x wide x high): 10.085 x 5.300 x 2.120 mm - Weight: 38.000 kg

Used machine in good condition. Available for immediate delivery. - Screw diameter: 55 mm - Shot weight max: 460 g - Injection pressure: 1.650 / 2.050 bar - Injection volume: 510 cm? - Clamping force: 3.500 kN - Mould opening stroke max: 1.000 mm - Daylight between platens max: 1.650 mm - Platen size (h x v): 1.200 x 1.100 mm - Distance between tie-bars (h x v): n/a mm - Control: CC200 - Core pulls: 4 - Power: installed max: 45 kW - Dimensions (long x wide x high): 7.500 x 2.200 x 2.400 mm - Weight: 27.000 kg

- Euromap: E12 press, E67 robot, connected by E12 / E67 converter - Including Wittmann W733-0398 robot 2007, X900, Y1800, Z3000, C-pneu - Screw diameter: 55 mm - Injection volume: 617 cm? - Screw L/D ratio: 20 - Clamping force: 3.500 kN - Mould height max: 860 mm - Mould height min: 250 mm - Cascades / Sequential valve gates: 4 - Platen size (h x v): 1.080 x 1.080 mm - Distance between tie-bars (h x v): 735 x 735 mm - Ejector force: 3.500 kN - Control: CC100

clamping force: 250 kN injection volume: 49 cm³ screw diameter: 25 mm platen size: 300 x 300 mm Condition: used, specification: C-frame injection moulding machine - used clamping unit: - clamping force: 250 kN - heating platen size: 300 x 300 mm - clamping/opening stroke: 330 mm - Closing direction: from below - Lateral ejector: yes - Ejector stroke/force: 115 mm / 12 kN Injection unit: - Injection volume max.: 49 cm³ - Screw diameter: 25 mm - Screw length: 16 - Screw speed max.: 250 rpm - Injection: from above - Voltage: 3x 400 V, 50 Hz, N, PE - Connected load: 55 kW/92 A - Weight approx.: 3,500 kg Various accessories are also available: - Injection unit (25 screw) - 2 heating plates - Funnel and various small parts The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used machine in good condition. Available for immediate delivery. - Screw diameter: 30 mm - Shot weight max: 104 g - Injection rate: 111 cm?/s - Injection pressure: 2.400 bar - Injection volume: 113 cm? - Screw speed: 400 rpm - Screw L/D ratio: 23,6 - Nozzle stroke / force max.: 250 / 47 mm / kN - Nozzle stroke max: 160 mm - Clamping force: 1.600 kN - Mould opening stroke max: 600 mm - Mould height max: 300 mm - Mould height min: 300 mm - Daylight between platens max: 900 mm - Distance between tie-bars h: 550 mm - Distance between tie-bars v: 550 mm - Platen size h: 750 mm - Platen size v: 750 mm - Ejector force: 61 kN - Control: CC200 - Oil tank capacity: 460 l - Power: installed max: 30 kW - Operating hours: 28.140 - Dimensions (long x wide x high): 5.800 x 1.700 x 2.400 mm - Weight: 9.500 kg

Used machine in good condition. Available for immediate delivery. - Air Valves: 1 - Screw diameter: 50 mm - Shot weight max: 353 g - Injection rate: 217 cm?/s - Injection pressure: 1.430 bar - Injection volume: 343 cm? - Platen size (h x v): 820 x 750 mm - Ejector force: 1750 kN - Core pulls: 1 - Power: installed max: 15,3 + 30 kW - Operating hours: 0 - Dimensions (long x wide x high): 5.750 x 1.680 x 2.190 mm - Weight: 11.500 kg

- ENGEL ER-IS Interface. - Prepared for CC300 Control - Compatible with machine: VC from 28 to 220t EM from 30 to 160t EMC from 50-180t - 1 x vacuum circuit - 1 x compressed air circuit - Compatible machine: VC88-220, EM30-160, EMC50-180 t - Stroke (Z): 1.400 mm - Stroke (Y): 800 mm - Stroke (X): 400 mm - Payload: 5 Kg - Driving method: X, Y, Z: servo, C: pneumatic

clamping force: 450 kN injection volume: 99 cm³ screw diameter: 30 mm platen size: 860 x 320 mm closing stroke: 406 mm Condition: used, Specification: C-Frame Injection Moulding Machine - second-hand Serial No.: 45083 Clamping unit: - Clamping force: 450 kN - Opening travel: 406 mm - Heating plate size: 860 x 320 mm - Mould height min.: 264 mm - Max. plate spacing: 464 mm - Ejector stroke: 20 mm - Ejector force: 20 kN Injection unit: - Screw diameter: 30 mm - Screw length L/D: 16 - Dosing stroke: 140 mm - Stroke volume max.: 99 cm³ - Max. spray weight: 114 g - Screw speed: 20 - 300 rpm - Injection flow: 106 cm³/s - Injection flow increased: 71 cm³/s - Special injection pressure: 1451 bar - Spec. injection pressure increased: 2205 bar - Nozzle path: 530 mm - Operating hours: 54716 h - Pump drive  ...

clamping force: 450 kN injection volume: 135 cm³ screw diameter: 35 mm platen size: 600 x 400 mm Condition: used, Specification: C-frame injection moulding machine for TPE - used clamping unit: - clamping force: 450 kN - heating platen size: 600 x 400 mm - sliding table: yes - Clamping direction: from below - Ejector / lifter: Up + Lo Injection unit: - Injection volume max.: 135 cm³ - Screw diameter: 35 mm - Connected load: 3x 400 V, 50 Hz - Weight approx.: 5,500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

clamping force: 1.300 kN injection volume: 106 / 43 cm³ screw diameter: 30 / 25 mm platen size: 850 x 750 mm daylight between platens - max.: 900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

clamping force: 2000 kN injection volume: 251 cm³ screw diameter: 40 mm platen size: 1.050 x 900 mm daylight between platens - max.: 880 mm Condition: used, very good condition Specification: Vertical injection moulding machine, with rotary table injection unit: - screw diameter: 40 mm - injection volume: 251 cm³ - Injection flow: 244 cm³/sec - Spec. injection pressure: 1,300 bar - Spec. injection pressure increased: 2,020 bar - Nozzle stroke: 500 mm - Nozzle pressure: 51.9 kN Clamping unit: - Clamping force max.: 2,000 kN - Clamping platens hor. x vert. 820 x 459 mm - Max. platen distance: 880 mm - Opening stroke: 400 mm - Mould installation height: 480 mm - Ejector stroke: 105 mm Number of heating zones incl. nozzle: 4 - Heating power: 9.3 kW - Weight clamping unit: 11,000 kg - Weight injection unit: 3.500 kg - Wei ...

clamping force: 450 kN injection volume: 99 cm³ screw diameter: 30 mm platen size: 860 x 320 mm closing stroke: 406 mm Condition: used, Specification: C-Frame Injection Moulding Machine - second-hand Serial No.: 45083 Clamping unit: - Clamping force: 450 kN - Opening travel: 406 mm - Heating plate size: 860 x 320 mm - Mould height min.: 264 mm - Max. plate spacing: 464 mm - Ejector stroke: 20 mm - Ejector force: 20 kN Injection unit: - Screw diameter: 30 mm - Screw length L/D: 17 - Dosing stroke: 140 mm - Stroke volume max.: 99 cm³ - Max. spray weight: 114 g - Screw speed: 20 - 300 rpm - Injection flow: 106 cm³/s - Injection flow increased: 71 cm³/s - Special injection pressure: 1450 bar - Spec. injection pressure increased: 2210 bar - Nozzle path: 200 mm - Operating hours: 54716 h - Pump drive  ...

clamping force: 1.750 kN injection volume: 318 cm³ screw diameter: 45 mm platen size: 700 x 700 mm daylight between platens - max.: 460 mm Condition: used, Specification: Horizontal injection moulding machine, Injection unit: - Screw diameter: 45 mm - Screw length L/D: 20 - Spray volume: 318 cm³ - Shot weight max.: 287 g - Special spraying pressure: 2,100 bar Clamping unit: - Max. clamping force: 1,750 kN - clamping plates: 700 x 700 mm - Opening path max.: 460 mm - mould installation height: 150 mm - Operating hours: 89217 h - 1x core puller - Handling / Robots: ENGEL The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.