We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
Manufacturer:
(Category: 107-665)
used
Description: Operating voltage: 220 V Frequency: 50 Hz Rated current: 5 A Connection: 0.75 kWweight approx.: 150 kg, Approx. Onsite Dimension. (l x w x h): 920 x 720 x 1,170 mm
used
Inv. Num. : 5263 Type: DB 642 ST Producer: Transfluid Created: 1999 Parameters: Minimum tube diameter: 6 mm Maximum tube diameter: 42 mm Maximum bending angle: 190 h Machine height: 1150 mm Machine length: 4000 mm Machine width: 650 mm
used
Description: Horizontal bending machine with: - NC control - Dual footswitch - Set of standard tools pressure 10 t Stroke 200mm Table size 450 x 450 mm Working speed: 10 mm/sec. Working height 940 mm Tool height max. 150 mm Total power requirement 1.1 kW Bending capacity 150 x 6 mm Weight 0.4 tons Dimensions 1.15 x 0.5 x 0.9mmweight approx.: 400 kg, Approx. Onsite Dimension. (l x w x h): 1,150 x 500 x 900 mm
used
Description: - Pressing force: 12 to - with different bending inserts from size 15 to 50weight approx.: 30 kg, Approx. Onsite Dimension. (l x w x h): 630 x 200 x 540 mm
used
weight approx.: 100 kg, Approx. Onsite Dimension. (l x w x h): 1,450 x 260 x 1,200 mm
used
Description: Tube Bending Machineweight approx.: 750 kg, Approx. Onsite Dimension. (l x w x h): 1,400 x 700 x 1,300 mm
used
Inv. Num. : 5262 Type: XOTH 40 Producer: Unicorn Generated: Parameters: Maximum tube diameter: 40 mm Maximum pipe wall thickness: 2 mm Total power requirement: 4.6 kW Machine height: 1120 mm Machine length: 4450 mm Machine width: 800 mm Machine weight: 1100 kg
used
Inv. Num. : 5648 Type: XOTM 60 Producer: UNIT Created: 2004 Parameters: Minimum tube diameter: 20 mm Maximum tube diameter: 60 mm Machine length: 4900 mm Machine weight: 130 kg
used
Key data: 60 mm, 2 mm
Bending capacity: Ø60 x 2 mm Bending angle: 0 - 180° Turret: 12-way adjustment Mandrel length: 4500 mm Bending tools: - Ø 22 mm - Ø 25 mm - Ø 48 mm Equipped with: - 3 thorns - Mandrel retraction device - Foot pedal - Bending speed adjustment Country of origin: the Netherlands Motor power: 7.5 kW Machine LxWxH: 5350 x 1100 x 1100 mm Machine weight: 2300 kg
used
TECHNICAL SPECIFICATION Max. diameter of tube: 65 mm Max. wall thickness: 2 mmELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 HzDIMENSIONS / WEIGHTS space requirements -left/right-: 5400 mm space requirements -front/back-: 1550 mm total height: 1500 mm total weight approx.: 6500 kg+ 8-axis CNC pipe and wire bender+ CNC controlled feeder with pneumatic grippers+ separate servo drives for A-axis: rotation unit 35 mm B-axis: bending heand C-axis: feeder D-axis: &nb sp;mandrel device L-axis: slide rail P-axis: chucking device V-axis: counter holder Y-axis: bending Z-axis: & nbsp;bending head up/downFeedi ...
used
Description: Material / Max. Capacity / Min. Radius flat / 1 1/4 '/ 10' C-channel 1x2 '/ 60' Round tube 1 1/2 '/ 20' Round tube 2 '/ 60' Diameter of the rolls 1 1/2 ' Maximum pipe diameter 38 mm.weight approx.: 46 kg, Approx. Onsite Dimension. (l x w x h): 500 x 340 x 420 mm
used
Description: For deburring the ends of pipes Operating voltage: 3 x 400 V Frequency: 50 Hz Connection: 0.12 kW Incl. filter extraction system from the manufacturer ZENNER Volume flow: 106 m³/h Total pressure increase: 1886 Pa Density: 1.2 kg/m³ Speed: 1865 rpm Operating temperature: max. 20 - 80°Cweight approx.: 1,500 kg, Approx. Onsite Dimension. (l x w x h): 4,000 x 2,000 x 2,600 mm
new
roll diameter: 350 mm: 110 mmbending speed: 1-5 m/minBending capacity: 157 Wcm³total power requirement: 7,5 kWweight of the machine ca.: 2950 kgDomestic equipments:- Direct drive of all three shafts- Single delivery of the side rollers- Horizontally and vertically usable- Hydraulically movable side rectifier (via control panel)- 2 digital displays for the feed rollers- Hardened rollers- Mobile control panelThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.