used Plastic injection machines for sale

Injection moulding machine ENGEL CL 2550/550 Year of production - 2005 Robot name – "ENGEL ERC53/1-F" Clamping force [tons]- 550 Maximum distance between plates [mm]-1650 Min. mould height [mm]-310 Max. mould height [mm]-800 Column spacing (mm) -915x860 Mounting plate size(mm)-1345x1280 Ejector stroke (max) [mm]-250 Screw diameter [mm]-80 Injection weight [g]- 1800 Oil quantity [liter]-1000 Mold Injection Sequence -2 Robot machine ready to work Number of hydraulic cores S/R- 1/1

Key data: 7500 kN, 5400 g/PS, 120 mm

Year of construction 2003 Machine is in good condition, and immediately available

Key data: 5500 kN, 60 mm

Machine incl. robot !

Engel - 550 tons machine - Bi-injection

Offer: Engel Duo 940H/940 M/650 Combi Year 2011 2x Viper Robot 40 PS: Machine free from approx. 08/2021

machine in stock!

Clamping unit Clamping force [kN] 2750 Dimensions of mounting plates (hxv) [mm] 1050 x 900 Min./ max. mould height [mm] min 350 Maximum opening width [mm] 1200 Injection Unit Screw diameter [mm] 55 Injection volume [cm3] 556 Injection weight [g] 130 Injection pressure [bar] 1763 Electrical-hydraulic equipment Pump motor rated power [kW] 37 Heater power [kW] 19,8 Dimensions & Weight Net weight with control cabinet [t] 19

clamping force: 4.000 kNinjection volume: 735 cm³screw diameter: 60 mmplaten size: 1.400 x 1.030 mmCondition: used,Specification: horizontal injection moulding machine, factory no: Injection unit 1:- screw diameter: 60 mm- metering stroke: 200 mm- Screw speed: 226 rpm- Injection flow: 351 cm³/sec- Injection volume: 735 cm³- Spec. injection pressure: 1.489 bar- Spec. injection pressure increased: 2,011 barInjection unit 2:- Screw diameter: 40 mm- Metering stroke: 140 mm- Screw speed: 400 rpm- Injection flow: 197 cm³/sec- Injection volume: 251 cm³- Spec. injection pressure: 1.286 bar- Spec. injection pressure increased: 2.029 barClamping unit:- Clamping force max.: 4,000 kN- Clamping platens: 1,400 x 1030 mm- Opening stroke: 954 mm- Max. platen distance: 1,520 mm- Ejecto ...

Key data: 3000 kN, 850 g/PS, 70 mm

Engel ES 1350/300 HL Year of construction 2001 + 2003 Hours: 77623 h + 92737 h Clamping force: 300 tons. Screw diameter: 70 mm 4 core pulls incl. Wittmann removal robot

Inv. Num. : 6582 Type: ES 330/65 Producer: ENGEL Produced: 1991 Parameters: Clamping force: 650 kN Screw diameter: 35 mm Injection capacity: 154 cm³ Height of the clamping plate: 570 mm Min. width of the clamping plate: 552 mm Distance between stands (horizontal): 405 mm Distance between stands (vertical): 345 mm Injection weight: 4000 kg

Manufacturer/manufacturer: Angel Typ/type: 330/75 HL - V Year/year: 1999 Control/controller: CC 100 Clamping force/clamping force: 750 kN Holmabstand/Dist.Betw.Tiebars: -. Disk size/platen size: 660 mm x 560 mm WZ height/mould hight: min 200 mm Opening/opening stroke: 450 mm Plate distance of max/Max open daylight: 650 mm Auger/screw size: 40 mm Stroke volume/shot volume: 201 cc spec. Spritzdr / injection pressure: 1600/2180 bar General / General Engine power: 15 kW Heating/heating power: 9.2 kW Dimensions/dimensions: 3.8 m x 1.3 m x 2 m Weight/weight: 4900 kg Screen text/language: German/English Additional equipment/additional equipment Core puller / core pulling: x 1 Robots / robotic interface

Manufacturer/manufacturer: Battenfeld Typ/type: BA 2000-1000 BK Year/year: 1999 Control/controller: CC 100 Clamping force/clamping force: 1100 kN Holmabstand/Dist.Betw.Tiebars: Disk size/platen size: 730 mm x 600 mm WZ height/mould hight: min 250 mm Opening/opening stroke: 500 mm Plate distance of max/Max open daylight: 750 mm Auger/screw size: 50 mm Stroke volume/shot volume: 251 cc spec. Spritzdr / injection pressure: 1300/2050 bar General / General Engine power: 18.5 kW Heating/heating power: 9.2 kW Dimensions/dimensions: 4.8 m x 1.4 m x 2 m Weight/weight: 6000 kg Screen text/language: German/English Additional equipment/additional equipment Core puller / core pulling: x 2 Robots / robotic interface

clamping force: 1.750 kNinjection volume: 318 cm³screw diameter: 45 mmplaten size: 700 x 700 mmdaylight between platens - max.: 460 mmCondition: used,Specification: Horizontal injection moulding machine,Injection unit:- Screw diameter: 45 mm- Screw length L/D: 20- Spray volume: 318 cm³- Shot weight max.: 287 g- Special spraying pressure: 2,100 barClamping unit:- Max. clamping force: 1,750 kN- clamping plates: 700 x 700 mm- Opening path max.: 460 mm- mould installation height: 150 mm- Operating hours: 89217 h- 1x core puller- Handling / Robots: ENGELThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 900 kN, 140 g/PS, 35 mm

Year of construction: 2006 Clamping force: 90 tons. Screw diameter: 35 mm Pump hours: 46393 h

clamping force: 2000 kNinjection volume: 251 cm³screw diameter: 40 mmplaten size: 1.050 x 900 mmdaylight between platens - max.: 880 mmCondition: used, very good conditionSpecification: Vertical injection moulding machine, with rotary tableinjection unit:- screw diameter: 40 mm- injection volume: 251 cm³- Injection flow: 244 cm³/sec- Spec. injection pressure: 1,300 bar- Spec. injection pressure increased: 2,020 bar- Nozzle stroke: 500 mm- Nozzle pressure: 51.9 kNClamping unit:- Clamping force max.: 2,000 kN- Clamping platens hor. x vert. 820 x 459 mm- Max. platen distance: 880 mm- Opening stroke: 400 mm- Mould installation height: 480 mm- Ejector stroke: 105 mmNumber of heating zones incl. nozzle: 4- Heating power: 9.3 kW- Weight clamping unit: 11 ...

Offer: Engel Insert 500V/100 LIM Bj./year 2014 approx. 8000h

Key data: 700 kN, 139 g/PS, 35 mm

Year of construction: 2002 Clamping unit - Clamping force: 700 kN - Tie bar width: tie-barless - Tool installation height 250/ 700 Injection unit - Shot weight (HP): 139 g - Screw diameter: 35 mm Pump running time - approx. 81,042 h Remark: - Dispensing without sprue picker and external Peripherals - VT card 2 defective General - 4 core pulls

clamping force: 1.300 kNinjection volume: 106 / 43 cm³screw diameter: 30 / 25 mmplaten size: 850 x 750 mmdaylight between platens - max.: 900 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Electric Injection Molding Machine ! Clamping unit Clamping force [kN] 600 Dimensions of mounting plates (hxv) [mm] 720 x 600 Injection Unit Screw diameter [mm] 35 Injection volume [cm3]: 154 Injection weight [g] 140 Injection pressure [bar] 2400 Dimensions & Weight Net weight with control cabinet [t] 5,7 Dimensions (L x W x H) [m] 4.7 x 1.4 x 2.7

1,0 St. gebr. Injection molding machine with robot Manufacturer: ENGEL Type: VICTORY 500/120 Power Year of construction: 2002 Clamping force: 120 tons Tie bar spacing: tie-bar-less Screw diameter: 35 mm Injection volume: 192 cm³ Control: EC100 A03 Equipment: -Robot manufacturer Engel, type: ERC43/1-E, RC-100 Tandem stroke design (smaller overall height of Robots) Travel: X - axis: 500 mm Y - axis: 800 mm Tandem stroke version 500 + 500 mm C-axis (swivel) 0 - 90° -2.0 pcs. core pulls hydraulically on BAP -Highly wear-resistant screw up to 450° C -Clamping plates vertically enlarged

Production year: 2004 Injection unit: .../500 Screw diameter: 40 mm Specific injection pressure: 2019 bar Injection volume: 251 ccm Injection weight: 239 g Tool closure system: 120/... Clamping force: 120 t Tool plate dimensions: 740 x 680 mm Distance between columns: no columns mm Tool height: 300 mm Opening distance: 500 mm Max.Distance plates: 800 mm Ejector stroke: 130 mm General data: Pickup date: Immediately Dimensions (m) LxWxH: 5,1 x 1,5 x 2,1 m Weight: 7600 kg Instrumentation: - 2 x pneumatic valve - hot runner connection - bimetallic injection system - we have to the Picker machine

Manufacturer: ENGEL Type: VICTORY300/120TECH Year of construction: 2008 Clamping force: 120 tons Spar spacing: Tie barless Screws DN: 40 mm Moulded part weight: 180 g/Ps Control: EC200 Equipment: -Robot interface -2.0 core trains

1,0 St. gebr. Injection molding machine Manufacturer: ENGEL Type: VICTORY300/120TECH Year of construction: 2008 Clamping force: 120 tons Tie bar spacing: tie-bar-less Screws DN: 40 mm Moulded part weight: 180 g/ps Control: EC200 Equipment: -Interface robot Yvg0i8 -2.0 pcs. core pulls

Plastic Injection Molding Machine ERLHOFF - TE 20/90

2 - K machine

Key data: 1500 kN

Ferromatik Milacron Magna T(MTs) 150-450 / production line with the Wemo 6-5 xDesign robot, Wemo WCS-R conveyor belt and contactor housing / machine in very good technical condition Year of construction: 2017 Injection unit: Screw diameter: 45 mm Spray weight: 215 g Injection pressure: 1984 bar Dosing volume: 226 ccm Clamping unit : Clamping force: 150 t Tie bar spacing: 510x510 mm Size of clamping plates: 740x740 mm Ejector: hydraulic Clamping unit: toggle lever Controls: B&R - Touchscreen Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Operating hours: 11,000 in automatic mode Euromap 67 Robot Interface Air valve x 1 Hydraulic core pull x 1 Hot runner controller x 36 (for additional payment) Injection unit is wear-resistant and resistant to corrosion Main motor of the machine - servo motor driven by inverter Central lubrica ...

Machine in Stock

Key data: 110 , 198 , 40

Manufacturer: Krauss Maffei Type: KM 110 - 520 C2 Year of construction: 2003 Control: MC 4 Closing force: 1100 kN Closing type: Hydraulish Tie bar spacing: 470 mm x 470 mm Plate size: 745 mm x 770 mm Tool height: min 300 mm Opening distance: 600 mm Plate spacing max.: 900 mm Screw: 40 mm Lifting volume: 217 ccm Injection weight PS: 198 gram HP Injection pressure: 2377 bar general Engine: 18.5 kW Heating: 13 kW Dimensions: 4.5 m x 1.5 m x 2.2 m Weight: 6000 kg Screen text: German / English Additional equipment Robot interface Core train: x1 Accu

KRAUSS MAFFEI KM 110-520 C1 warehouse no.: 503020 manufacturer: KRAUSS MAFFEI type: KM 110-520 C1 controller: MC4 year of construction: 2003 technical data clamping unit clamping force: 1100 kN distance between tie bars h:: 470 mm distance between tie bars v:: 470 mm size of mould plates h: 745 mm size of mould plates v: 770 mm min. mould height: 300 mm max. open daylight: 900 mm opening stroke: 600 mm ejector stroke: 150 mm ejector force: 22 kN centering diameter of moving platen: 125 mm centering diameter of fixed platen: 125 mm weight of mould: 1485 kg technical data injection unit screw diameter: 40 mm swept volume: 217 ccm injection pressure: 2377 bar screw length: 23 l/d screw speed: 307 min plasticising rate: 22 g/s PS injection rate into the open: 126 g/s PS number of heating zones: 5 measures & weight measures of machine lxbxh: 4.4m x 1.5 ...

Clamping unit Clamping force [kN] 1100 Dimensions of mounting plates (hxv) [mm] 745 x 770 Clearance between columns (hxv) [mm] 470 x 470 Min./ max. mould height [mm] min 300 Injection Unit Screw diameter [mm] 50 Injection volume [cm3]: 393 Injection weight [g] 358 Injection pressure [bar] 1892 Dimensions & Weight Net weight with control cabinet [t] 7,8 Dimensions (L x W x H) [m] 5.0 x 1.6 x 2.0

Dimensions & Weight Net weight with control cabinet [t] 7.69 Dimensions (LxWxH) [m] 4.48 x 1.5 x 2.2 Clamping unit Clamping force [kN] 1250 Dimensions of mounting plates (hxv) [mm] 805 x 770 Clearance between columns (hxv) [mm] 530 x 470 Min./ max. mould height [mm] min 300mm Injection Unit Screw diameter [mm] 45 Injection volume [cm3] 275 Injection weight [g] 250 Injection pressure [bar] 1878

Clamping unit Clamping force [kN] 1300 Dimensions of mounting plates (hxv) [mm] 745 x 770 Clearance between columns (hxv) [mm] 470 x 470 Min./ max. mould height [mm] min 300 Injection Unit Screw diameter [mm] 55 Injection volume [cm3] 475 Injection weight [g] 432 Injection pressure [bar] 1564 Dimensions & Weight Net weight with control cabinet [t] 7,8 Dimensions (L x W x H) [m] 5.0 x 1.6 x 2.0

Clamping unit Clamping force [kN] 4500 Dimensions of mounting plates (hxv) [mm] 1270 x 1200 Clearance between columns (hxv) [mm] 900 x 800 Min./ max. mould height [mm] min 480 Maximum opening width [mm] 1650 Injection Unit Screw diameter [mm] 90 Injection volume [cm3] 1953 Injection weight [g] 1777 Injection pressure [bar] 1742 Electrical-hydraulic equipment Pump motor rated power [kW] 90 Heater power [kW] 59 Dimensions & Weight Net weight with control cabinet [t] 26.3 Dimensions (L x W x H) [m] 7.98 x 2.35 x 2.51m

Krauss Maffei KM 50 / 160 C2 Operating hours approx. 47,500 Core train Operational data collection (function uncertain, was not used by us) Various power connections Screw diameter D=30mm Condition: good / Ready to use without funnel

Key data: 500 kN, 25 g/PS, 18 mm

Cleaned, tested, repaired machine, ready for production. 50 tons clamping force, 320x320 column spacing. 18 screws, 25 cm3 injection volume. 1 core puller, 1 air circuit. The display language is German or English. The handbook is in German. The machine is in very good condition, it can be viewed during operation. A video of his operation was also made. Check out our other ads.

1,0 St. gebr. Injection molding machine with turntable, lateral unit from medical technology Manufacturer: KRAUSS MAFFEI Type: KM100/180CX Year of construction: 2007 Clamping force: 100 tons Tie bar spacing: 370 x 370 mm Screw DN 1: 25 mm Displacement: 59 cm³ Moulded part weight: 54 g/hp Screw DN 2: 15 mm Displacement: 14 cm³ Moulded part weight: 13 g/hp Control: MC5 Equipment of the machine: -Interface robot -Additional control pump -2.0 ST. Core pulls

clamping force: 4200 kNinjection volume: 572 - 1716 cm³screw diameter: 90 mmplaten size: 1040 x 1040 mmclosing stroke: 620 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Screw diameter; 105 mm Injectable volume: 3611 cm3 Injection pressure: 1580 bar Column width: 1000 x 930 mm Minimum mould thickness: 600 mm Opening stroke: 1150 mm Cores: 6 Robot Interface: Yes Options: Robot Interface 20 mold heating zones Sequential Injection

Specifications: Clamping force: 1100 kN Clamping plate: 745 x 770 mm Installation height: 300 mm Panel spacing: 900 mm Screen text: German Control: MC4 Spray side Screw diameter: 35 mm Displacement: 156 cc Spray pressure: 2429 bar Dimensions: 4.30 x 1.50 x 2.20 m Pump drive power: 18.5 kW Oil filling: 345 l Total weight: 5,8 to Paintwork: RAL 9002/5002 Other: 3-fold core pull, air valve 1-fold, ejector plate protection, tool hot channel 6-fold, pressure accumulator, low-wear plasticization, water battery 8-fold, Euromap 12 interface, machine shoes, complete documentation

PET-LINE 60N/95 complete system for preforms PCO consisting of: 1. PET Injection system Netstal PET 2000-3700 R 2. 60 cavity injection mould Otto Hofstetter AG (27 gr) 3. 60 cavity injection mould Otto Hofstetter AG (30,5 gr) 4. Dryer Piovan 560 kg/h 5. Air dehumidifier RPA 1200, 1200 m3/h 6. Compressor Aircenter SM 12, 60 m3 7. Water chilling unit Chiller CA1921MT 8. Water chilling unit Chiller CA0621MT Manufacturer: Otto Hofstetter AG Year of production: 2012 Installed power: 462 kW. Working hours: 7285 h

Warehouse No.: 503010 Manufacturer: NETSTAL Type: SynErgy 1500k-600 Control: DSP 4 Year of construction: 2007 Operating hours: 47942 h Technical data Close page Clamping force: 1500 kN Holmass v: 460 mm Holmass h: 460 mm Plate size h: 700 mm Plate size v: 757 mm Installation height min.: 250 mm Installation height max.: 550 mm Plate position max.: 1000 mm Opening distance: 450 mm Ejector stroke: 150 mm Ejector force: 50 kN Centering movable plate D: 125 mm Centering fixed plate D: 125 mm Technical data spray side Screw diameter: 55 mm Displacement: 427 cc Spray pressure: 1562 bar Screw length: 23 l/d Screw stroke: 180 mm Screw speed: 860 min Screw torque: 550 N Plasticizing current: 70 g/s PS Injection flow to the outside: 2376 g/s hp Dimensions & Weight Machine dimensions LxWxH: 6.53m x 1.84m x 1.97m Total weight: 10100KG Equipment German scre ...

Warehouse No.: 503011 Manufacturer: NETSTAL Type: SynErgy 1500k-600 Control: DSP 4 Year of construction: 2007 Operating hours: 39299 h Technical data Close page Clamping force: 1500 kN Holmass v: 460 mm Holmass h: 460 mm Plate size h: 700 mm Plate size v: 757 mm Installation height min.: 250 mm Installation height max.: 550 mm Plate position max.: 1000 mm Opening distance: 450 mm Ejector stroke: 150 mm Ejector force: 50 kN Centering movable plate D: 125 mm Centering fixed plate D: 125 mm Technical data spray side Screw diameter: 55 mm Displacement: 427 cc Spray pressure: 1562 bar Screw length: 23 l/d Screw stroke: 180 mm Screw speed: 860 min Screw torque: 550 N Plasticizing current: 70 g/s PS Injection flow to the outside: 2376 g/s hp Dimensions & Weight Machine dimensions LxWxH: 6.53m x 1.84m x 1.97m Total weight: 10100KG Equipment German scre ...

Offer: Netstal Synergy 3500/1700 Robot IML SM700/TM200 High Speed bj./year 2009/10

SANDRETTO MEGA T 4435/610 injection moulding machine (1998) 610 ton thermoplastic injection machine In working condition. Euromap 4435/610 Screw diameter: 21 Calculated injection volume: 2831cm3 Screw length (LD): 21 Maximum injection capacity: 746 cm3/1” Laminating capacity: 86 g/1” Pressure on material: 1548 bar Closing force: 610 tons. Variable displacement engine torque: 5570 Nm. Screw speed: 153 RPM Screw hydraulic motor power: 120 HP Injection group stroke: 725 mm. Heating zones: 4+nozzle. Total heating power: 38 kW. Mold locking force: 5985 kN Mold thickness min/max.: 300/1000 mm. Mobile plane stroke: 930 mm. Plate dimensions: 1270 x 1270 mm. Column passage: 850 x 850 mm. Column diameter: 160 mm. Extraction force: 103 kN Puller stroke: 350 Vacuum cycles: 10-11 n/1” Hydraulic circuit pressure: 160 bar Oil tank capacity: 850 l. Electric motor powe ...

Stork N-2500-1400 Year of construction: 2005 Injection unit: Spray pressure (max.) 2100 bar Injection volume (max.) 595 ccm Injection weight PS (max.) 565 g Spraying speed (max.) 299 ccm/s Nozzle (immersion depth) Clamping unit: Clamping force 250 tons Locking force 275 tons Size of the clamping plate (hor. + vert.) 920 X 920 Opening stroke (max.) 575 mm Max. tool weight Tool height (min./max.) 200-685 Clear width between the spars 585-585 mm Discharge stroke (max.) 175 mm Ejector diameter max.80 mm Centering ring (DS-AWS) 160 mm Max. clear width between tension p.  ...

Key data: 35 kN

SUMITOMO SD35E 35Ton Injection Molding Machine The high-speed injection molding machine for all challenges Manufacturer: Sumitomo Model No.: SD35E 35t Plastic Injection Molding Machine Clamping force: 35 t Power: AC 200V, 30V, 125A Inverter: 21A Heating power: 4.8 KW Weight of the injection compound: With the built-in extrusion screw approx. 100g Included: DRD III Yushkin high-performance robot Year of manufacture: 04/2000 Condition: At the time of shutdown, the machine was in perfect condition while CD production was running There are 2 identical machines available, the price is per machine The machine is currently still tied up in our customer's factory in Bielefeld and will be handed over to our customer due to a restructuring of the production processes. We sell the assets on behalf of our customers. The offer prices are to be understood as net prices in EURO ex  ...

Wittman-Battenfeld injection machines 2 units 110tons and one 180t -BTT110 - BT110 - BT180

Key data: 7000 kN

Length x width x height of the machine: 8.3 x 2.5 x 2.5 m Machine weight 32000 kg Accessories: Yudo-Star Sigma 1500 Industrial Robot

Key data: 4800 kN

Length x width x height of the machine: 8.6 x 2.0 x 2.1 m Machine weight 23000 kg Accessories: Yudo-Star Sigma 1500 Industrial Robot