We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Description: Maximum machinable length 3200 mm Min. machinable length 200 mm Maximum width 200 mm Minimum width 30 mm Maximum height of the part 130 mm Min. height 30 mm Min/max tenoning carriage speed 055 m/min Profiling speed min/max: 420 m/min Profiling table height 850 mm Height of profiling table with automatic infeed 995mm Table height for tennoning 995mm Machine sold without tools or accessoriesApprox. Onsite Dimension. (l x w x h): 16,000 x 6,400 x 2,400 mm, weight approx.: 12,400 kg
used
Processing field 3200 x 1300 4 axle machine
used
x-travel: 5000 mmy-travel: 550 mmz-travel: 550 mmControl: Fanuc type: Series 15 M table surface area: 5000x520 mmTable load: 4000 kgquill stroke: 550 mmthroat: 580 mmdistance between table/spindle: 250-800 mmspindle taper ISO: 40 spindle turning speed range: 40-2000 U/minTool changer: 40 total power requirement: 55 kWweight of the machine ca.: 20 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Code: 0732 Brand: STETON Model: TF - 2 - CE Standard Automatic working centre for window frames (Programmable tenoning/profiling machine) - CE Standard Technical data: Table dimensions mm 1850 x 850 Working table height mm 910 Tenoning carriage - Table mm 880 X 500 - Stroke mm 1100 - Speed m/min 8/12 - N° 2 Pneumatic hold-down cylinders Cut-off saw diameter mm 400 F 30 - Motor Kw 2,2 - Rpm 3000 - Suction mouth diameter 40 mm Tenoning 2 pieces in one operation Vertical spindle diameter mm 50 - Length mm 270 - Spindle stroke mm 210 - Speed rpm 3000/6000 - N° 50 automatic positions - Max tool diameter mm 340 - Motor Kw 7,5 - N° 2 suction ports diameter 120/150 Glazing bead unit - Blade diameter mm 180/200 F 30 - Motor Kw 2,2 - Speed rpm 3000 - Suction mouth diameter mm 80 Automatic feeder Outside profiling of an assembled frame Compressed air 7 bar Overall dimen ...
used
x-travel: 1300 mmy-travel: 500 mmz-travel: 570 mmspindle taper: SK40 spindle turning speed - stepless: 60 - 6000 U/minrapid traverse: x/y/z 7,5 m/minNumber of tools: 16 St.table surface area: 1500 x 400 mmworkpiece weight: 700 kgtotal power requirement: 12 kWweight of the machine ca.: 4100 kgdimensions of the machine ca.: 3800 x 3800 x 2800 mm- SIEMENS control SINUMERIK 828D- automatic tool clamping- Cooling device- automatic central lubrication- Chip tray- Full enclosure- Operation manualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
working length X: 2.500 mmworking length Y: 1.300 mm: 4 - 80 mmNumber of milling agregates: 2 St.Number of boring motors: 2 St.: 72 : 16 : 4 : 90° schwenkbar : 130 m/min: 80 m/min: 50 m/min: 27 m/minturning speeds: max. 18.000 U/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Description: WEEKE BHX055 vertical machining centre with 4-fold tool changer Operating hours: 4,340 hours Technical Data: CNC controlled machining centre drilling, milling and sawing & 4-fold tool changer Net working area: min. 200x70 mm, up to max. 3,050x850 mm Thickness of workpiece: 12-60 mm Weight: Max. 35 kg  , Speed: X, Y: 50 m/min Z: 15 m/min  , Drilling V13: 5 Drill spindlesfor machining the top of workpiece in 'X direction'. All 5 drills can be controlled individually 4 Drill spindles for workpiece machining in 'Y direction'. All 3 drills can be controlled individually 4 Drill spindles for machining the side of the workpiece in 'X direction'. All 4 drills can be controlled individually 2 Drill spindles for machining the side of the workpiece in 'Y direction'. All 2 drills are individually controllable  , Free aggregate: 1 Free aggregate with HSK63 quick-chan ...
used
WEEKE BHX055 vertical machining center with tool changer Type: Weeke BHX 055 Operating hours: 4,340 hours Specifications: CNC controlled machining centre for drilling, milling and sawing & 4-fold tool changer Working range of axes: min. 20070mm, max. 3,050850mm Max. working thickness: 12-60 mm Max.Piece Weight: 35 KG Feed: X, Y: 50 m/min Z: 15 m/min Drilling V13: 5 drilling spindles for vertical drilling in the direction of "X" individually controlled 4 drilling spindles for vertical drilling on the upper side in the direction of "Y" individually controlled 4 Drilling spindle for horizontal drilling in the direction of "X" on the upper side individually controlled 2 drill spindle for horizontal drilling on the upper side in the direction of "Y" individually controlled Mill: 1 milling motor including HSK63 - motor power 5 KW-S1 ( 1,250 / 24,000 RPM ...
used
Description: Well-maintained WEEKE Optimat BHC 655 CNC machining center with 2 machining supports milling on the right / drilling on the left and a REIS robot. Attention: The robot is no longer controlled via the WEEKE software and was built in 1999. Machining support right milling - Main spindle 9 KW with C-axis (speed 1250 - 24000 rpm) - 14-fold tool changer - Milling spindle 3 axis Machining support left drilling - Drill head vertical 32 spindles - Drill head horizontal 6 spindles Y-axis - Drill head horizontal 8 spindles X-axis - Groove saw unit can be swiveled in X-Y direction by 90° - Laser pen for vacuum suction positioning - Consoles 8 pieces and length 1300 mm - Vacuum pumps 2 pieces , REIS RV130 robot cannot be controlled via the WEEKE control and was deactivated in the software! The robot can be driven by hand. Year of construction 1999, machine no. 2436626 Loading d ...
used
Description: Three axes, axis travel: X  ,- 3860 mm, Y - 1822 mm, Z1 - 325 mm, Z2 - 185 mm, Operating hours approx. 48'369, work table: X - 3250mm Y - 1250 mm, Z - 125 mm, automatic tool spindle in combination with tool change magazine, tool holder: HSK 63, rotation speed: 1250 - 24,000 rpm infinitely programmable, maximum power at the tool up to 7.5/9 KW, C - axis aggregate interface, automatic tool change magazine with 14 places maximum tool weight 5 kg without units, with CE certificate, Lista drawer cabinet, contents: dowel drills, milling cutters, collets, various tool holders, some with tools, Windows 10 operating system !Replacement of the C-axis - October 2022!working width y-axis: 1,250 mm, working height z-axis: 125 mm, working length x-axis: 3,250 mm, drilling spindles horizontal x-axis: 4 pieces, drilling spindels horizontal y-axis: 2 pieces, drilling spindels vertical x ...
used
Specifications: Workpiece length: min 200 mm Workpiece length: max 2500 mm Workpiece width: min 70 mm Workpiece width: max 850 mm Workpiece thickness: min 12 mm (for flat machining) min. 16 mm (for horizontal machining) max. 60 mm Workpiece weight: max. 30 kg Speed of axes: Vector speed X/Y = 30 m/min Z = 15 m/min Features: Workpiece Document Area Mechanical support by means of a roller conveyor for workpieces. Workpiece removal area Mechanical support by means of a roller conveyor for workpieces Drill Gear V8 Feed stroke Z-direction: 60 mm Drilling depth: max. 38 mm Direction of rotation: right/left Speed: 2800 1/min, frequency controlled Propulsion: 1.8 kW Drill bit holder: d = 10 mm for Quick-change system Total drill bit length: 70 mm Drill diameter: max. 35 mm Spindle spacing: 32 mm Spindle type: individually controllable power control PC85 ...
used
Specifications: Workpiece length: min 200 mm Workpiece length: max 3050 mm Workpiece width: min 70 mm Workpiece width: max 850 mm Workpiece thickness: min 12 mm (for flat machining) min. 12 mm (for horizontal machining on the two transverse edges and on the upper edge), Note: When drilling horizontally from the lower edge, central drilling is only permitted up to a workpiece thickness of 19 mm. max. 60 mm Workpiece weight: max. 30 kg Speed of axes: Vector speed X/Y = 50 m/min Z = 15 m/min Features: Workpiece Document Area Mechanical support by means of a roller conveyor for workpieces. Workpiece removal area Mechanical support by means of a roller conveyor for workpieces. Drill gear V13 Feed stroke Z-direction: 60 mm Drilling depth: max. 38 mm Direction of rotation: right/left Speed: 2,800 rpm Propulsion: 1.8 kW Drill bit holder: d = 10 mm for Quick-chan ...
used
Description: Work table: X = 3250 mm (length) Y = 1220 mm (width) Z = 125 mm (thickness) CONSOLE TABLE WITH LED POSITIONING SYSTEM (DIODE LIGHT BAND) PROCESSING CONFIGURATION V12, H4X/2Y, N1, F1-HSK-15 KW, C-AXIS, W8 REAR, W8 FRONT 10 pieces suction cups as per illustration 108651362_Suction cups (1) CE SAFETY AND PROTECTION DEVICE (not provided) - Protective grille in the side and rear area Protective grille only partially present, door present. MACHINE IN NEED OF REPAIR! DESCRIPTION: Machine throws up errors when starting up according to photos in the attachment. Missing error texts, diagnosis only starts when called up several times. Tool is changed, but cannot be stored in changer because changer because changer (system changer) is not referenced. Switch cabinet wired with various jumpers, It is not clear why the jumpers were set. Defective weld seam, defective power chain br ...
used
Description: WEEKE - WAMHOFF OPTIMAT VENTURE 1 CNC Machining Centre Travel range X - Y - Z axis: 3860 - 1523 - 185 mm Rapid Traverse speed X- Y - Z axis: 60 - 50 - 15 mm Compresses air required: 7 bar Dust extraction port: 200 mm Electric power - total connection load: 16 kWserial number: 0-250-11-1658, Approx. Onsite Dimension. (l x w x h): 5,800 x 1,600 x 2,000 mm, weight approx.: 4,200 kg
used
Description: 3 spindles Crosscut saw Glazing bead saw Working width min/max: 30/220 mm Min/max working height: 30/100 mm Working length min/max: 330/2600 mm Spindle power: 7.5/12 kW, Saw: 35 kW Spindle speed min/max: 2800/7000 rpm Spindle section: 40 mm Cross clamping length Machine sold without tools or accessoriesApprox. Onsite Dimension. (l x w x h): 3,500 x 4,500 x 2,300 mm, weight approx.: 4,000 kg
used
Description: CNC machining centres for milling, drilling and sawing window, door and frame parts and is equipped with: a semi-automatic infeed conveyor and outfeed conveyor as a buffer Two machining units Automated tool magazine Operating system: Nexus Software: Windows NT 4.0 S/N: 107216 Tool spindle 1/2 Holder type: HSK 63 F Direction of rotation: left and right Speed: 0 - 18,000 rpm Power: 10.5 kW Tool magazine Distance between tool stations: 100 mm Number of tool stations per magazine: 15 Tool length from planning HSK 63: max. 290 mm Workpiece Maximum timber/clamp height: 95 mm Minimum timber/clamp height: 15 mm Maximum timber length: 3100 mm Maximum number of parts on input: 21 parts of 56 x 82 mm Maximum number of parts on output: 21 parts Minimum clamping distance between rebates: 10 mm Tools Please note that this machine is supplied without tools serial number: 107,2 ...
used
Description: Manual available at this LINK Minimum working size 40 x 25 mm Maximum working size 200 x 105 mm Working length 200 - 3500 mm X1 Axis Stroke: 6120 mm X2 Axis Stroke: 6120 mm X3 Axis Stroke: 6200 mm X4 Axis Stroke: 6200 mm CU Axis Stroke: 1620 mm Y1 Axis Stroke: 4000 mm Y2 Axis Stroke: 4000 mm Y3 Axis Stroke: 4000 mm Z1 Axis Stroke: 440 mm Z2 Axis Stroke: 440 mm Z3 Axis Stroke: 620 mm V1 Axis Stroke: 1100 mm V2 Axis Stroke: 1100 mm1 W Axis Stroke: 230 mm A Axis Stroke: 180° C Axis Stroke: 360° SP1 Spindle Power: 14 kW SP2 Spindle Power: 14 kW SP3 Spindle Power: 12 kW Tool changer magazine with 62 positions Max tool diameter 200 mm Tool attachment HSK 63 Blade group power 2.2 kW Blade diameter 200 mm Total power 55 kilowatts SINUMERIK HMI control WARNING! Belts, elastic bands, and photocells of loading and transfer systems require maintenance.serial number: 152/06, Approx. ...
used
Description: The Sapiens 1001 TFF machining centre is dedicated to sawing, routing and drilling components for the production of windows and doors. The structure is a type of bridge with a fixed portal. The cross beam is mounted on rigid, sturdy columns, which are based on the ground by means of levelling and alignment units, both transverse and lateral. The base of the column from the part reference side is connected to the central structure of the die, where the clamping systems and X-axis for part positioning are integrated. The machine entrance and work areas are equipped with vertical and lateral pneumatic pressure devices, which ensure that the workpieces are correctly positioned against the lower and lateral reference of the clamping system. The clamping units slide along the X axis and position the workpieces in the work zones according to the machining to be carried out. In pa ...