used Milling Machines for sale

X-axis: 500 mm Y-axis: 400 mm Z-axis: 400 mm Table dimensions: 700 x 425 mm Spindle Exception: SK 40 Spindle speeds: 1 - 4000 rpm. Spindle stroke: 60 mm Equipped with: - ISO tool holders - Coolant system -Operating instructions Country of origin: Germany Motor power: 5 kW Machine LxWxH: 200 x 200 x 200 cm Machine weight: 2000 kg

Universal milling machine Lagun from a training workshop in top condition! Head universally rotate, swivel and tilt. Type: FTV2 YOC 2006 Tool holder SK40 Drilling pinole Coolant device Travel X-axis x00 mm Travel Y-axis x60 mm Travel Z-axis x40 mm Milling head type Vertical milling head Speed range 40 - 2000 mm/rev Table clamping surface approx. x00 x x00 mm T-slot size xx mm Feed X-axis xxx mm Feed Y-axis xxx mm Feed Z-axis xxx mm Weight approx. 1,850 kg Further data on request, rest according to photos Special price

Macmon M100 milling machine Speeds 40-2000 rpm Travel X-axis 310 mm Y-axis travel 170 mm Z-axis travel 340 mm Tool holder SK 40 tightening thread S20x2 Table clamping surface 600 x 215 mm T-slot size 12 mm Weight approx. 1120 kg Dimensions 1066 x 1048 x 1330 mm Accessories/Equipment: - Machine light - 2-axis digital display - Coolant device -Operating instructions - Machine feet The machine has been technically tested and is in good good condition. Reversing backlash X axis: 0.1mm Reversal clearance Y axis: 0.1mm Reversal clearance Z axis: 0.2mm Price net free loading from stock

Tool holder: SK40 Travel X/Y/Z: 310 / 170 / 340 mm Speed range: Horizontal (16) 40 - 2000 1/min Vertical (16) 50 - 2500 1/min Spindle stroke: 60 mm Feeds: 9 - 450 mm/min Table size: 600 x 210 mm Projection: 133 - 320 mm Motor power: 1.6 / 2.9 kW Connection: 400 V, 16 A Weight approx.: 860 kg Dimensions approx.: 1150 x 1150 x 1680 mm Head swivel: 90° / 90° Equipment: - 3-axis digital display, brand: Elesta - Coolant base with pump - Machine lamp - Emergency stop push button - Drilling pinoles - Modernization 2017 - Operating instructions - Electr. Documentation

Macmon M100E milling machine Speeds 40-2000 rpm Travel X-axis 310 mm Y-axis travel 170 mm Z-axis travel 340 mm Tool holder SK 40 tightening thread M 16 Table clamping surface 600 x 215 mm T-slot size 12 mm Weight approx. 1120 kg Dimensions 1066 x 1048 x 1330 mm Accessories/Equipment: - Machine light - 3 axis Fagor digital display - Coolant device -Operating instructions The machine has been technically tested and is in very good condition. Reversing backlash X axis: 0.15mm Reversal clearance Y axis: 0.25mm Reversal clearance Z axis: 0.2mm Price net free loading from stock

Universal milling machine Macmon M200 (comparable to Deckel FP3) Built in 1971 Machine no. 628/2 X-axis travel 600 mm Travel Y-axis 310 mm Z-axis travel 390 mm Speed range 37-1900 rpm Feed in 3 axes from 7-380 mm/min Rapid traverse in all 3 axes Vertical & Horizontal Spindle Vertical quill and horizontal quill extendable - SK-40 Tightening system S20x2 Rigid clamping table Coolant system Operating instructions 3-axis Fagor digital display (X scale counts twice) The machine has been technically tested and is fully functional. Spindle concentricity 0.002mm Reversing clearance X-axis 0.75mm Reversal clearance Y-axis 0.7mm Reversal clearance Z-axis 0.2mm Footprint LxW: 1500x1500mm Weight approx. 1500kg

Control: HEIDENHAIN TNC 135 Handwheels in all axes Working range X / Y / Z 400 / 250 / 375 mm Speed 50 3150 RPM 205 x 800 mm clamping surface Recording ISO 40 Quill stroke 50 mm Feed X, Y 5 1000 mm / min Feed Z 5 670 mm / min Rapid traverse X, Y 2.4 m / min Rapid traverse Z 1.6 m / min Space requirement L / B / H 1860 x 2300 x 1810 mm Weight 850 kg

Control: HEIDENHAIN TNC 135 Handwheels in all axes Working range X / Y / Z 400 / 250 / 375 mm Speed 50 3150 RPM 205 x 800 mm clamping surface Recording ISO 40 Quill stroke 50 mm Feed X, Y 5 1000 mm / min Feed Z 5 670 mm / min Rapid traverse X, Y 2.4 m / min Rapid traverse Z 1.6 m / min Space requirement L / B / H 1860 x 2300 x 1810 mm Weight 850 kg

Control cabinet for MAHO 600 - MAHO had manual transmission damage and was therefore exploited. - Are also other parts in stock. Please inquire! Good condition fully functional can be visited and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article, in order to avoid misunderstandings, can be viewed before the purchase and tested under electricity. Please ask questions before buying to avoid ambiguity. For general questions or an appointment for a viewing, I can be reached at any time at the telephone number below or above. Errors in the description and prior sale excepted. VAT will be shown separately on my invoices. Shipping with freight forwarder.

MAHO C Axis Machine Table - Table diameter: 600 mm Good condition fully functional can be visited and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article, in order to avoid misunderstandings, can be viewed before the purchase and tested under electricity. Please ask questions before buying to avoid ambiguity. For general questions or an appointment for a viewing, I can be reached at any time at the telephone number below or above. Errors in the description and prior sale excepted. VAT will be shown separately on my invoices. Shipping with freight forwarder.

Description: SPECIFICATIONS Universal milling machine Brand: Maho Type: MH 500 C Control: Philips<, CNC 432 Year of construction: 1983 Table width: 650 mm Table width: 320 mm Displacement: X= 500 mm, Y= 400 mm, Z= 300 mm Spindle intake: ISO 40 mm Head adjustment: 90 degrees Manual available Machine size (lxwxh): 1,800 x 2,000 x 1,900 mm Note! CNC control defectiveApprox. Onsite Dimension. (l x w x h): 2,000 x 1,800 x 1,900 mm, weight approx.: 2,000 kg

Description: CNC contouring control type Philips 432 E Technical data: Working range X 600 mm Working range Y 400 mm Working range Z 400 mm Table size / rigid angled table 1000 x 400 mm Tool holder ISA 40 Quill stroke 80 mm Speed range 80 - 4000 rpm Feed range X,Y,Z 1 - 2000 mm/min. Rapid traverse X 4 m/min. Rapid traverse Y 3 m/min Rapid traverse Z 5 m/min Resolution 0.001 mm Drive power/ total connected load 4.0 kW/ 16 kVA with vices and tool holderApprox. Onsite Dimension. (l x w x h): 2,300 x 2,160 x 1,900 mm, weight approx.: 2,250 kg

X-axis: 300 mm Y-axis: 200 mm Z-axis: 350 mm Table dimensions: 520 x 260 mm Tilt and rotatable Spindle Holder: ISO40 Spindle speeds: 40 - 2000 rpm. Spindle stroke: 50 mm Feed: 5 - 500 mm/min. Infinitely variable with rapid traverse Equipped with: -Vice -Turntable - ISO milling tools - Cabinet with accessories - Original operating instructions Country of origin: Germany Machine LxWxH: 1200 x 1300 x 1500 mm Machine weight: 1000 kg

x-travel: 500 mmy-travel: 350 mmz-travel: 380 mmtable-size: 790x360 mmspindle turning speed range: 63-4000 U/minweight of the machine ca.: 1.8 tActive Digital read outMisc.accessorieswww.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Milling head SK40, with flange, with quill and tool clamp, swivel. good condition. Is from a CNC tool milling machine MAHO 700C, Would also have a smaller one from a DECKEL FP3A. Also with quill and clamp. Also sell other spare parts of this MAHO 700C, clamping table, control parts, motor, spindles, control panel. ...

- Digital display Heidenhain. - Accessories available. Workspace X-travel 420 mm Y-travel 250 mm Z-travel 340 mm Spindle speeds 12 Speed range 50 - 2240 rpm. Spindle motor power (at 50 Hz) 1500/3000, 1.1/1.85 kW Milling table Clamping surface vertical 200 x 630 mm Clamping surface fixed angle table 250 x 700 mm Number of T-slots 3/5 T-slot width 12-H7 mm T-slot spacing 45 mm Feed range 8 – 400 mm/min. Recording ISO 30 Dimensions and weight length x width 1400 x 1400 mm Total height approx. 1400 mm Weight approx. 850 kg

Heidenhain Active - Digital Display Stepless feed lamp Coolant device Travel X / Y / Z 420 / 250 / 345 mm Speed 50 - 2240 rpm Clamping area 635 x 250 mm Feed in 3 axes 0 - 750 mm/min Rapid response in 3 axles 1400 mm/min Recording ISO 40 Vertical / Horizontal Pinole extendable Mass approx. 1.2 x 1.2 x 1.6 m

For sale is: 1 piece used tool milling machine Manufacturer: Mikron Type: WF51D Year: 1980 x-travel 800 mm y-travel 500 mm z-travel 460 mm Table size 1000 x 500 mm Spindle holder ISO SK 40 Spindle speeds - infinitely variable 31.5 - 3150 rpm Operating voltage 380 V Control : Heidenhain TNC 355B Rapid traverses 6000 mm/min Quill stroke 90 mm Coolant reservoir electronic handwheel Machine comes with a wide range of accessories, see pictures (incl. tool cabinet). The milling machine can be viewed in our warehouse in 09599 Freiberg.

X-axis: 930 mm Y-axis: 300 mm Z-axis: 500 mm Table dimensions: 1450 x 320 mm Spindle Holder: ISO40 Spindle speed: 1500 rpm. Digital readout: Sony 3 axis readout Country of origin: Spain Machine weight: 3000 kg Machine LxWxH: 1900 x 1800 x 2000 mm

Year of construction: 2017 Control: Heidenhain TNC 640 Condition: Mint Condition - Double gantry drive in the X and Y axes - Vibration-damping polymer concrete bed with foundation-free 3-point installation - Ball screw with directly coupled AC servo motors - Absolute measuring systems with (2) glass scales each in X and Y axes for increased accuracy -Travel: - X-axis: 800 mm - Y-axis: 600 mm - Z-axis: 500 mm - Max. travel speed 45/m/min - Max. acceleration 10/m/s² - HF spindle HSK E 50 - Spindle power 25kW, speed 1 to 18,000 rpm, torque S6 (20%) 64 Nm - Tool changer HSK E 50, 72 – compartment - Precision package 1 with heat exchanger circuit +/- 0.1 °C and drive cooling - Precision package 2 with position and geometry error compensation X/Y/Z axis - T-slot table - Minimum quantity lubrication, external spindle - Blowing air spindle external - Automatic central  ...

Model: Trak DPM 750 Type: AEVF Serial No.: 513352 Controls: Proto Trak MX3, switchable to MX2 Travel: X, Y, Z 750 x 400 x 610 mm Table size: 1270 x 320 mm Weight: 1900 kg Year of construction: 1995 Country of origin: Taiwan

Description: SPECIFICATIES Merk: Pullmax Type: X91 Max. plaatdikte: 25 mm Plaatdikte: 25 mm Aandrijving mechanisch Approx. Onsite Dimension. (l x w x h): 1,100 x 1,000 x 1,700 mm, weight approx.: 1,000 kg

-Digital display -Accessories available. Clamping surface 1100 x 300 mm Longitudinal stroke 700 mm Transverse stroke 250 mm Vertical lift 470 mm Spindle speeds 45-2000 RPM. Recording ISO 40 12 milling feed longitudinal and transverse 18 800 mm / min. vertical 7.2 320 mm / min. The milling spindle 7 HP drive motor Drive motor of 1.5 HP table Weight of the machine CA. 2050 kg

Digital display Anilam Table 1250 x 350 mm Longitudinal path 850 mm Crosspath 250 mm Vertical path 470 mm Spindle speeds 45 - 2000 rpm. Recording ISO 40

Description: Table 290 x 1200mm, X-850mm, Y-250mm, Z-450mm, ISO 40 mount, speed 34-1540 rpm, without CE certificateApprox. Onsite Dimension. (l x w x h): 1,850 x 2,100 x 1,650 mm, weight approx.: 1,800 kg

2 piece F. 17.3 2 piece F. 17.34 Milling machines with double head (duplex), with counter holder for horizontal milling

Description: X -300 mm Y-110 mm Z-210 mm freestanding 480 x 125 mm spindle adaptor ISO30 spindle speed 100 - 4000 rpm voltage 380VApprox. Onsite Dimension. (l x w x h): 1,550 x 1,100 x 1,800 mm, weight approx.: 750 kg

Digital X-way 700 mm Y-way 250 mm Z-way 490 mm Spindle speeds 38 - 1510 rpm. Recording ISO 40 Feed 6 - 1050 mm/min Rapid speed 3500 mm/min Clamping area 1100 x 305 mm Universal milling head 0° - 270° swivel Dimension 1930 x 1560 x 1720 mm Machine weight approx. 2100 kg

Travel • X-axis (bed): 16,000 mm • Y-axis (vertical): 2,100 mm o Option Y = 3,100 mm • Z-axis (headstock): 1,200 (1,500) mm Control • CNC control: Siemens Sinumerik 840 C o Option control conversion Heidenhain iTNC 530 o Option control conversion Heidenhain TNC 640 o Option control conversion Siemens Sinumerik 840 SL Feed rate • X, Y and Z axes infinitely variable from: 2 – 12,000 mm/min Universal milling head in orthogonal design • Swivel range milling head mount: 340 x 1 degree • Swivel range milling head: 180 x 1 degree • Tool holder: SK 50 DIN 69871 • Speed range: 22 – 3,200 rpm Year of construction: 1998 • 2013 – Headstock overhaul • 2017 – Overhaul of milling head • 2022 – Partial overhaul Clip • T-slots: 28 H7 • T-slot spacing: 250 mm, • Clamping area: 8,500 mm x 1,500 mm Chip conveyors (2 pieces) � ...

Digital X-travel 450 mm Y-travel 170 mm Z-travel 400 mm Table size 300 x 600 mm Spindle speeds 60 - 1200 rpm. Recording ISO 30 Machine weight approx. 600 Kg

Description: SPECIFICATIONS Welding edge milling machine Brand: SMT Pullmax Type: X10 Max. sheet thickness: 50 mm Depth of chamfer for stainless steel: 10 mm Depth of cut-off steel: 13 mm Chamfer angle: 35 ° Approx. Onsite Dimension. (l x w x h): 600 x 500 x 1,100 mm, weight approx.: 1,000 kg

Description: Longitudinal travel of upright X 10,000 ,mm Spindle head vertical travel Y 3,300 mm RAM transverse travel Z 1,100 mm Spindle quill travel W (boring bar) 800 mm Translating travel C 2,000 mm Turntable plate positions B 360,000 n Turntable size 2,700 x 2,700 mm Drilling unit vertical travel V 2,700 mm Drilling unit transversal travel U 500 mm SELCA S4045PD control Serial number 02-021.021 Dig depth 2000 mm z-motion: 1,200 mm, table surface area l x w : 2700 x 2700 mm, control: SELCA 4045PD, power capacity - spindle: 50 kW, weight approx.: 160,000 kg, Approx. Onsite Dimension. (l x w x h): 19,000 x 10,000 x 6,000 mm

Qty.1 Second-hand milling (scalping) line Mfc.: Torrington Type: 30" Slab Miller Strip width: 30” – 762 mm Cutter Speed: 500 rpm Metal speed: 18 fpm (1.9 m/min.)) Capacity: min. ¼” max. 1-1/4” Thickness Entry thickness range: 13 – 20 mm

Qty. 1 Second-hand milling and scalping machine – Copper and brass strip – stopped in 2010 Mfc.: Torrington Type: FR1 Built: 1976 Milling and scalping from the upper and lowe sides Strip width: 508 - 770 mm Strip thickness: 10.0 – 13.5 mm Coil weight: 6.5 Ton Capacity: approx. 200 000 T/annum

x-travel: 720 mm y-travel: 255 mm Z-Travel: 400 mm clamping surface area: 1000 x 250 mm range of revolution per miute: 40...3150 / 8 step U/min tool taper: ISO 40 (SK40) milling head swivable : +/- 90 ° Quill Stroke: 127 mm feed:Z: 8,5...136 / with 9 step rapid traverse:: X/Y/Z: 2500 mm/min feed:: X/Y: 28...450 / with 9 step mm/min. total power requirement: 3.2 (4 kVA) kW dimension machine approx. LxWxH: 1.8 x 1.6 x 2.4 m Weight of the machine approx.: 1,5 t

x-travel: 850 mmy-travel: 500 mmz-travel: 450 mmtable-size: 1250x500 mmspindle taper ISO: 50 spindle turning speed range: 35,5-1800 U/minweight of the machine ca.: 5.2 tHEIDENHAIN TNC-355Misc accessorieswww.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Universal milling machine SN55/2000 with steady rest.

inner taper of milling spindel: / collet diameter: / turning speed range: / U/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

inner taper of milling spindel: / collet diameter: / turning speed range: / U/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

inner taper of milling spindel: / collet diameter: / turning speed range: / U/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

inner taper of milling spindel: / collet diameter: / turning speed range: / U/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

inner taper of milling spindel: / collet diameter: / turning speed range: / U/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

inner taper of milling spindel: / collet diameter: / turning speed range: / U/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

inner taper of milling spindel: / collet diameter: / turning speed range: / U/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Milling cutters, End mills, Die mills, Unused Mostly Kestag, Seco, Sandvik, Walter, Böhlerit, ... different diameters, singles, sets or entire lot ! Please request a list !

Description: own design (PHILIPS)Approx. Onsite Dimension. (l x w x h): 1,200 x 1,150 x 2,000 mm, weight approx.: 2,000 kg

Sell a milling machine with some accessories. The milling machine works. Suitable for smaller metal construction companies.

: 420 mm: 220 mm: 380 mm: 840x390 mm: 950x250 mm: 65-2600 U/min: DIN 2080 ISO 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 420 mm: 220 mm: 380 mm: 840x390 mm: 950x250 mm: 65-2600 U/min: DIN 2080 ISO 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 585/600 mm: 465/480 mm: 385/400 mm: 900x500 mm: 1200x250 mm: 40-2000 U/min: SK 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.