We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
Manufacturer:
(Category: 201-1237)
used
Key data: 1200 mm, 1200 mm
Parcel cross-cut saw 6,00m similar. PRINZ HOLTEC electric length adjustment and saw feed, immediately available, ready to use! fully functional, fully operational, partially dismantled; Model: Cross-cut saw from Haskin AB, Swedish manufacturer; many parts are identical in construction to PRINZ systems - Year of construction: approx. 1996 - Max. package length: 6.00m - Dimensional tolerance: +/- 2 mm - Max. package dimensions: 130cm x 130cm x 6000mm - Hydraulic length adjustment for saw positioning - Hydraulic cutting feed (up, down) - Length adjustment with digital display to 1/10 mm (mm) - kerf width can be stored as offset value (kerf is included!) - Feed of the length positioning (FORWARDS/BACKWARDS) is infinitely adjustable depending on the direction (!) - Cutting feed/speed of the saw blade (UP/DOWN) is infinitely adjustable in each direction (!) ...
used
RANDEK SP700 Cross-cut saw Production: Randek, Sweden Year of construction: 1989 in good condition, cleaned and checked Randek's SP700 series is a reliable saw designed for manufacturers of roof trusses. Manufacturer of roof trusses and houses all over the world. The SP700 saw is effective, easy to use and accurate. She has been on the market for a long time. has been on the market for a long time and is constantly in close contact with our customers many customers. The saw blade of this semi-automatic saw supports oblique cuts, that is, it can make all the cuts you need. The large saw blade diameter (700 mm) also allows you to make several sections of woodpiles to cut at the same time. - Bevel cuts from 0° to 360° - Cutting heights up to 250 mm, three boards can be cut per cutting cycle - PLC programmable saw - Fixation of the wood near the cutting area for a precis ...
used
RANDEK SP700 Cross-cut saw Production: Randek, Sweden Year of construction: 1990 in good condition Randek's SP700 series is a reliable saw designed for manufacturers of roof trusses. Manufacturer of roof trusses and houses all over the world. The SP700 saw is effective, easy to use and accurate. She has been on the market for a long time. has been on the market for a long time and is constantly in close contact with our customers many customers. The saw blade of this semi-automatic saw supports oblique cuts, that is, it can make all the cuts you need. The large saw blade diameter (700 mm) also allows you to make several sections of woodpiles to cut at the same time. - Bevel cuts from 0° to 360° - Cutting heights up to 250 mm, three boards can be cut per cutting cycle - PLC programmable saw - Fixation of the wood near the cutting area for a precise cut Roller conve ...
used
RANDEK SP700 Cross-cut saw Production: Randek, Sweden Year of construction: 1989 SN 1989-02-08 in good condition Randek's SP700 series is a reliable saw designed for manufacturers of roof trusses. Manufacturer of roof trusses and houses all over the world. The SP700 saw is effective, easy to use and accurate. She has been on the market for a long time. has been on the market for a long time and is constantly in close contact with our customers many customers. The saw blade of this semi-automatic saw supports oblique cuts, that is, it can make all the cuts you need. The large saw blade diameter (700 mm) also allows you to make several sections of woodpiles to cut at the same time. - Bevel cuts from 0° to 360° - Cutting heights up to 250 mm, three boards can be cut per cutting cycle - PLC programmable saw - Fixation of the wood near the cutting area for a precise cut ...
used
Complete Log Cut-off Saw Manufactured by Raute
used
Cross-cut saw, optimisation saw Make: Reinhardt Model: Quickstop QS 160 P Year of construction: 1992
used
: Nein Cutting depth: 240 mmCutting height: 75 mmsaw blade diameter: 250 mmoutput: 3 kw: 4000 / 3.500 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
Maximum cutting area: 220x125/ 260x100/285x80/310x50 mm. When cutting boards on top of each other, h max. 100 mm. The structure is made entirely of thick-walled and reinforced fully painted steel. Solid floor mounting system with flanged steel feet for the mounting hole. Bimanual safety cut control in ergonomic position. Engine power of the saw blade 5.5 kW. Adjustable cutting speed via a pneumatic regulator. Maximum system for weight balancing and durability. Shock-absorbing system. Independent pneumatic adjustment options to adapt to different types of processing. Durable and easily replaceable saw blade adjustment bar. Carbide circular saw blade, diameter 500 mm, Z=108. Pneumatic upper workpiece clamping press with electro-pneumatic control. Presser movement system by means of new ball bearings with double dust protection and automatic lubrication system. CE-c ...
new
cutting width: max. 310 mmCutting height: max. 125 mmSaw blade diameter: 500 mmMotor output: 5,5 kWSpeed: 2.800 U/min.Required air-pressure: 6-8 barWorking height: 900 +/- 20 mmDimensions (L/W/H): 10645x1000x1300 mmSALVAMAC CLASSIC 50 – The semi-automatic miter sawwith SALVASTOP 100 - electronic length stop/slider-------------------------------------------------- -New machine from our demonstration room, Bj. 2022Pos. 1: Classic 50 under table miter saw-------------------------------------------------- -Maximum cutting area: 220x125/ 260x100/285x80/310x50 mm.When cutting boards that are on top of each other, h max. 100 mm.The structure is made entirely of thick-walled and reinforced full-surfacepainted steel. Solid floor mounting system with flanged steel feetfor the mounting hole.Bimanual safety cut control in ergonomic position.Motor power of the saw motor 5.5 kW.Adjustable cutting sp ...
used
cutting width: max. 250 mmCutting height: max. 80 mmSaw blade diameter: 400 mmMotor output: 3,0 kWturning speeds: 2800 U/minRequired air-pressure: 6-8 barwork height max.: 900 +-20 mm mmDimensions (L/W/H): 530x869x1217 mmSALVAMAC Legend 400 – The semi-automatic chop saw-------------------------------------------------- -Maximum cutting area: 220x80/ 250x50 mm.(When sawing stacked boards, note: rear stop height 100 mm)The structure is made entirely of sturdy, thick-walled steel,which is painted throughout and reinforced. A solid oneFloor mounting system is equipped with flanged steel feet,to ensure secure attachment.The two-hand control is ergonomically positioned for comfortand efficient operation.Motor power of the saw motor 3.0 kW.The cutting speed is adjustable via a pneumatic controller,to enable precise adjustment. The system also has aShock-absorbing system to minimize vibrations ...
used
cutting width: max. 375 mmCutting height: max. 125 mmSaw blade diameter: 500 mmMotor output: 5,5 kWturning speeds: 2800 U/minRequired air-pressure: 6-8 barDimensions (L/W/H): 530x869x1217 mmSALVAMAC Legend 500fast semi-automatic chop saw-------------------------------------------------- -Maximum cutting areaOption A: 220x125/310x50mmOption B: 350x80/375x50mm(When sawing stacked boards, note: rear stop height 100 mm)The structure is made entirely of sturdy, thick-walled steel,which is painted throughout and reinforced. A solid oneFloor mounting system is equipped with flanged steel feet,to ensure secure attachment.The two-hand control is ergonomically positioned for comfortand efficient operation.Engine power of the saw motor 5.5 kW.The cutting speed is adjustable via a pneumatic controller,to enable precise adjustment. The system also has aShock-absorbing system to minimize vibrations an ...
used
cutting width: max. 330 mmCutting height: max. 150 mmSaw blade diameter: 550 mmMotor output: 7,5 kWturning speeds: 2800 U/minRequired air-pressure: 6-8 barwork height max.: 900 +- 20 mmDimensions (L/W/H): 530x869x1217 mmSALVAMAC Legend 550 the semi-automatic chop saw-------------------------------------------------- -Maximum cutting area 220x150/330x50 mm(When sawing stacked boards, note: rear stop height 100 mm)The structure is made entirely of sturdy, thick-walled steel,which is painted throughout and reinforced. A solid oneFloor mounting system is equipped with flanged steel feet,to ensure secure attachment.The two-hand control is ergonomically positioned for comfortand efficient operation.Engine power of the saw motor 7.5 kW.The cutting speed is adjustable via a pneumatic controller,to enable precise adjustment. The system also has aShock-absorbing system to minimize vibrations and e ...
used
cutting width: max. 610 mmCutting height: max. 150 mmSaw blade diameter: 600 mmMotor output: 9,2 kWturning speeds: 2750 U/minRequired air-pressure: 7 barwork height max.: 900 +- 20 mmDimensions (L/W/H): 770x1385x1370 mmSALVAMAC Legend 600 the semi-automatic chop saw-------------------------------------------------- -Maximum cutting area 420x150/520x100/610x30 mm(When sawing stacked boards, note: rear stop height 100 mm)The structure is made entirely of sturdy, thick-walled steel,which is painted throughout and reinforced. A solid oneFloor mounting system is equipped with flanged steel feet,to ensure secure attachment.The two-hand control is ergonomically positioned for comfortand efficient operation.Engine power of the saw motor 9.2 kW.The cutting speed is adjustable via a pneumatic controller,to enable precise adjustment. The system also has aShock-absorbing system to minimize vibration ...
used
Description: Suitable for oblique cuts possibility -/+ 30 degrees.Approx. Onsite Dimension. (l x w x h): 500 x 400 x 650 mm, weight approx.: 25 kg
used
Description: .Approx. Onsite Dimension. (l x w x h): 3,500 x 800 x 1,200 mm, weight approx.: 100 kg
new
TR 450 MATRIX cross-cut system with automatic cutting cycle by input on the control panel or by cutting list Input material: Single or stacking material with fixed length Applications: Production of pallets, packaging, furniture and garden furniture Cross-section: mm 25x330, 40x310, 60x290, 85x277, 95x265 Min. workpiece thickness 10 mm (with automatic loader 20 mm) Work table inclined 8° Technical characteristics of the sawing unit: Pneumatic sawing unit TR450 Engine power 5.5 hp (4 kW) HM saw blade diam.450 mm., F=30 Z=72 S=4.2 Technical characteristics of the feed system: PUSH FEED SYSTEM AVAILABLE LEFT AND RIGHT Feed by rack and pinion system and brushless motor Positioning accuracy +/- 0.4 mm Powerful feed motor for a package weight of 80 kg Maximum feed speed 90 m/min Pneumatic lifting of the slider at the end of the cutting cycle and overhead ret ...
used
Code: 0154 Brand: STROMAB Model: TR 500 MATRIX 1 - CE Standard Automatic cut-off saw equipped with pusher Matrix – For the sizing and end-trimming of boards, strips, squares of solid wood or timber products - CE Standard Blade diameter 500 mm - Motor Hp 10 – Blade revolutions n° 3000 Cutting dimensions : With thickness 60 mm - cutting width mm 360 With thickness 100 mm - cutting width mm 325 With thickness 115 mm - cutting width mm 300 With thickness 135 mm - cutting width mm 250 Worktable height mm 850 Speed from right to left Electronic programmed pusher Matrix 1 for programmed cutting in sequence Technical data MATRIX: Automatic or semi-automatic cutting cycles Stored cutting cycles 99 Programmable measures for each cycle 15 Useful stroke mt.6 Positioning speed mt/min 0-40 Max return speed mt/min 40 Precise positioning mm +/- 0,5 Speed control with in ...
new
Saw blade feed pneumatic Motor power 7.5 KW Cross-section max. 280 x 135 mm, or 360 x 55 mm complete with: 1 mtr each Work table to the left and right of the saw blade bevelled sheet metal behind saw cut for drainage of Trimming cuts 2-hand control device Front saw blade protection HM saw blade Optionally available: Pneumatic front guard (TR501/P) Upper protective device cutting range (TR501/G) zus. Roller table per mtr. (with roll 60 mm) manual stop 60 mm manual stop 250 mm pneumatic stop 60 mm pneumatic stop 330 mm HM saw blade Laser directional light 220 V
new
Cutting cycle: Defect caps by chalk marking cutting with fixed lengths, Standard and sequential cutting, sequential cutting in markup mode. Infeed material: variable lengths for single piece loading WS.1 Continuous cross-cut saw 4 pcs. lower feed rollers 1 pcs. loading table 2 mt. Right with double marking table 1 pcs. outlet table 1 mtr. with rear stop Height of the rollers manually adjusted 12 pieces of luminescence chalk Cutting capacity: P. A: 130 x 175 mm, 120 x 200 mm, 100 x 230 mm, 85 x 250 mm, 15 x 305 mm Item B: 100 x 290 mm, 80 x 315 mm, 50 x 340 mm, 30 x 355 mm, 15 x 365 mm Control with: Color touch screen 7" Machining of cutting cycles directly on the machine Programming variants: - Defect caps by marking - Working with cutting list consists of 10 dimensions, possibility of repetition for any measure and total quantity of each measure 100 memory lo ...
used
Description: diameter disc 200 mm , 220 VApprox. Onsite Dimension. (l x w x h): 600 x 500 x 500 mm, weight approx.: 100 kg
Brought from Germany. The machine did not work in Lithuania. You can call or write to us. We can speak and write German and Russian. You can also send messages in English.
used
Approx. Onsite Dimension. (l x w x h): 600 x 500 x 1,000 mm, weight approx.: 70 kg
used
Description: With possibility of angle: - 45 / +45° Diameter of disc: 250 mmApprox. Onsite Dimension. (l x w x h): 600 x 600 x 650 mm, weight approx.: 30 kg
used
Log cross-cut saw Stable industrial cross-cut saw for blocks, e.g. for Production of pallets/firewood, etc. Used machine, Germany, North Rhine-Westphalia Electric cross-cut saw for the production of Pallet blocks incl. conveyor belt, Roller table and sliding table for squared timber Automatic inclined conveyor belt for filling a Mesh box or collection container The system works perfectly and is in good technical condition. Storage location, postal code 57319. Transport is carried out by buyer. Sale only without guarantee and warranty Subject to changes and errors in the technical data, specifications and prices as well as prior sale!
used
Cross-cut saw Ulmia Type 1550 Cross-cut length 200 mm Cross-cut height 50 mm Table rotatable 45 ° on each side With length stop length 1800 mm Motor power 1.1/1.6 kW Weight with pallet 250 kg Dimensions: 700 mm x 900 mm x H 1600 mm Package Dimensions 1200 mm x 900 mm x H 2000 mm on pallet
used
Four side planer V- Hold МВ 4012Х5 Technical specifications: Model: MB 4012x5 ( Max width 150mm) Working width: 25-150mm working thickness: 8-100mm feeding speed: 30m/min Main shaft diameter: 40mm Main shaft revolution: 6000r/min Number of spindles:5
used
Description:  , Disc diameter 250 mm Power: 1000 w , Speed: 3000 rpm , Monophasic  ,  ,main motor: 1.47 kW, Approx. Onsite Dimension. (l x w x h): 700 x 400 x 400 mm, weight approx.: 10 kg
new
Massive aluminium die-cast base Engine S1: 1800W Weight: 23kg HM Circular Saw Blade D: 305mm Idle speed 4200 rpm Swivel -45/+45° extendable back stop Quiet Belt narrow laser stroke marks exactly the cutting line Deep stop G&HM-KAP-305JL
used
Key data: 500 mm, 160 mm
Optimisation cross-cut saw OptiCut S 90 Speed - Left-hand version Max. wood entrance length 7.2 m Wood dimensions to be processed Sawing unit for large wood cross-sections with saw blade diameter Ø 500 mm Saw blade made of tungsten carbide, Z=144, WZ 20° Saw Blade Drilling 30 mm Saw blade speed max. 3600 rpm. Input lengths min./max. Widths min./max. Thicknesses/thicknesses min./max. Nominal cross-sections (without board curvature) Min. 500 - 7200 mm 23 - 160 mm 12 - 100 mm 23 x 12 mm .max. 160 x 100 mm Package size at max.9 strips per package Packet Ratio Width and Length to Thickness 160x100 mm 2:1 Fixed length min. 60 mm Performance / Positioning Moving speed of the positioning slide infinitely variable max. approx. 240 m/min. Cutting time / cutting height Adjustable The practical daily output depends to a large extent on the production ...
used
Automatic optimization crosscut saw: Technical data: Follow later!
used
Description: Miter band saw Cutting diameter 170 mm Saw band dimensions 2080 x 20 x 0.9 mm Table height 880 mm Cutting speed 40 + 80 m/min Cutting performance at 90° around 170 mm Cutting performance at 45° around 125 mm Cutting area at 90 degrees: rectangle 150 x 190 mm Cutting area at 45 degrees: rectangle 95 x 120 mm Total power requirement 1.1 kW Machine weight approx. 0.24 t Dimensions LxWxH 870 x 1,550 x 1.7 mmApprox. Onsite Dimension. (l x w x h): 870 x 1,550 x 1,700 mm, weight approx.: 240 kg