used Bending Presses for sale

Press brake edge machine edge bench press used Manufacturer: Mengele Type: C320-4B Built: 1966 last revision and repair: 2000 Location D-01587 Riesa Dimensions WxH: 6,250 x 3,650 mm Edge knife width: 6,150 mm sheet thickness at 6,000 mm bending length: approx. 7.5 mm. The machines are designed for very deep shaft bends, therefore very deep cheek recesses. Original 300 t pressing force - In 1989 the pressing force was increased to 350 t. The press is in very good condition despite its age. The machine is disassembled and ready for loading. documentation for the machine is available. Weight: about 45 t

pressure: 50 tchamfer lenght: 3075 mmdistance between columns: 2600 mmControl: Sintesi throat: 250 mmupper clamping stroke: 140 mmdayligth: 295 mmpre-running speed: 90 mm/secpress speed: 1-7 mm/secreturn speed: 62 mm/sectotal power requirement: 4 kWweight of the machine ca.: 4,4 tdimensions of the machine ca.: 3,7 x 2,2 x 2,2 mCondition: ready for operation: Video(s) available on our website.: CE signed: Electric 380 Volt: Foot switch: 2-hand-control panel: Upper tool divided: 3000 mmUpper tool: spitz/gekröpft Matrize: 1 V / geteilt, 3000 mmMatrize 4 V: 3000 mmProtective railing behind, right + left side: Mot. back gauge: 600 mmcrowning system: Hydraulic press brake with Sintesi microprocessor control for the axes Y1 + Y2 immersion depth and x back gauge. The control calculates and controls the immersion depth by specifying the bending angle and the position of the back gauge. T ...

pressure: 6,2 tchamfer lenght: 285 mm mmdistance between columns: 230 mmdayligth: 215 mmthroat: 70 mmstroke: 100 mmworking feed: 9,8 mm/secreturn speed: 50 mm/secquantity of oil: 10 lControl: DELEM DA 41T total power requirement: 0,7 kWweight of the machine ca.: 250 kgdimensions: 900 x 1300 x 550 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 210 tchamfer lenght: 3100 mmdistance between columns: 2600 mmdayligth: 490 mmthroat: 350 mmstroke: 215 mmworking feed: 9,8 mm/secreturn speed: 80 mm/secajustment speed: 130 mm/secwork height max.: 845 mmControl: DELEM DA 69 total power requirement: 15 kWweight of the machine ca.: 15 kgdimensions of the machine ca.: 3880 x 1675 x 3880 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 60 tchamfer lenght: 2050 mmdistance between columns: 1550 mmdayligth: 475 mmthroat: 255 mmstroke: 165 mmworking feed: 9,8 mm/secreturn speed: 117 mm/secajustment speed: 150 mm/secControl: DELEM DA 65 total power requirement: 5,5 kWweight of the machine ca.: 5000 kgdimensions of the machine ca.: 2300 x 1550 x 2470 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 tchamfer lenght: 2550 mmdistance between columns: 2050 mmControl: Delem DA-66T throat: 255 mmram stroke: 215 mmdayligth: 530 mmrapid traverse - down: 150 mm/secpress speed: 1 - 9,8 mm/secreturn speed: 80 mm/secpower capacity: 7,5 kWtank contens: 228 lsound - pressure - turn off level ca. max.: >70 dBconnected load: 12 kWweight of the machine ca.: 7 tdimensions of the machine ca.: 2,9 x 1,6 x 2,8 mCE signed: Electric 400 Volt: Foot switch: Light barrier in front: Matrize: Upper tool: crowning system: Mot. back gauge: 580 mmHydraulic press brake with updated CNC control Delem DA-66T,controlled backgauge in the axes X and R as well as Z manually with 4 stop fingers, hydr. Modufix tool clamping, Lasersafe, Wila crowning, cranked upper tool and matrix single V.X-axis back gauge 580 mm, max. 300 mm/sec, accuracy +/-0.05 mm.R-axis stop vertical 200 mm, 150 mm/sec, accuracy  ...

Description: - Power: 350 kn (35 Tons) - Folding length: 2000 - Passage between Amount: 1700 - Maximum stored: 105 Equipped with: - 1 Electric stop - 1 MBC Programming Automaton - 1 Pack v folding Stock number: 7461weight approx.: 10,000 kg, Approx. Onsite Dimension. (l x w x h): 3,350 x 2,100 x 1,750 mm

Key data: 50 t, 2000 mm

Machine Type: Press Brake Manufacturer: Promecam Type: 50x2 Condition: used / functional Offer will only be sent if a complete imprint is provided! Price 5.650 Euro incl. 19% VAT ex stock Warstein Location Warstein , Germany Reference M-PRO-0923 DESCRIPTION We offer you a used press brake from the manufacturer Promecam. Specifications Bending force 50t Bending length 2m Weight approx. 3.2t No tools required Availability: immediately Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions and payment terms. Errors in the descriptions and offers are excepted!

Description: • Hydraulic press brake • Serial number 2-200-40-2861 • Motor power 15 KW • Maximum bending force 200 T • Maximum working length approx. 4050 mm • Maximum distance between uprights 3700 mm • Throat depth 400 mm • Maximum stroke approx. 150 mm • Various accessories and bending tools are included • Transport dimensions 6200 x 2240 x 2920 mmweight approx.: 16,000 kg, Approx. Onsite Dimension. (l x w x h): 4,460 x 2,240 x 2,920 mm

Key data: 50 t, 2550 mm, 2050 mm

- Pressure: 50 t - Working length: 2550 mm - Stand width: 2050 mm - Bending capacity: at 1 m - up to 10 mm - Space requirements (W x D x H): 2.9 x 1.6 x 2.3 m - Machine weight: 4200 kg - Total power: 4.5 kW - Condition: very good Details little run, very good condition, cylinders all tight, press control type PSSAS Accessories Miscellaneous bending tools, documentation, stands for tools

Offer 24001 Specifications: - Working width 3050 mm - Printing capacity 220 t - Passage between uprights 2550 mm - Table width 405 mm - Projection 350 mm - Installation height approx. 240 mm - Plunger stroke 270 mm - Working height approx. 920 mm - Engine power approx. 15 kW - Oil filling approx. 300 l - Space requirement approx. W 4200 x H 2980 x D 2300 mm - Weight approx. 12500 kg - With: - Swivel arm – control panel with CYBELEC control - for 4 axes Y1 + Y 2 , X , Z -Mot. Back gauge with mot. Controlled height adjustment - Crowning - Safety – light barrier - 4-fold universal die + divided. Sharpening tool 3000 mm - Deer foot tools, V – dies 2900 mm - Other tool sections - E.- Footswitch, - Support arms

pressure: 50 tchamfer lenght: 1275 mmdistance between columns: 1040 mmstroke: 215 mmthroat: 420 mmwork height max.: 1085 mmweight of the machine ca.: 4900 kgdimensions of the machine ca.: 2200x1800x2400 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 230 tchamfer lenght: 4250 mmcolumn daylight: 3680 mmthroat: 420 mmstroke of ram: 445 mmcontrol: TASC 6000 weight of the machine ca.: 19500 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 125 tchamfer lenght: 3000 mmdistance between columns: . mmControl: CNC type: DA 65 R stroke: 200 mmsafety distance: 136 mmrapid traverse - down: 100 mm/secrapid traverse - up: 92 mm/secworking feed: 1-10 mm/secthroat: mmtotal power requirement: kWweight of the machine ca.: 13 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 170 tchamfer lenght: 4050 mmweight of the machine ca.: 16500 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 170 t

Trumpf Press Brake Trumabend V170, 1700KN, stroke: 365,. L-530cm, W- 240cm, H-300cm, Weight: 18to,

pressure: 230 tchamfer lenght: 3060 mmdistance between columns: 2690 mmStroke: 365 mmdistance between columns: 2690 mmdimensions: 3660 x 2310 x 3100 mmmachine weight ab.: 17.700 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 320 tchamfer lenght: 4080 mmdistance between columns: 3680 mmthroat: 410 mmajustment speed: 150 mm/secreturn speed: 135 mm/secbending speed: 10 mm/secheight of stroke: 365 mmdayligth: 535 mmtotal power requirement: kWweight of the machine ca.: ca. 24 tdimensions of the machine ca.: 4,65 x 2,31 x 3,10 m• 2D graphics control Delem DA• pneumatic matrices displacement• 2 movable support arms• Hydraulic tool clamping at the top and bottom• CNC controlled crowning• controlled axes: Y1, Y2, X, R1, R2, Z1, Z2The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 23435 Specifications: - Max. working length 1270 mm - Column passage 1040 mm - Max. pressing force 500 kN - Distance table / ram 410 mm - Stand projection 410 mm - Plunger stroke 215 mm - Lifting speeds - Downward speed rapid traverse 200 mm/sec - Upward speed 135 mm/sec - Downward pressing speed 1 - 10 mm/sec - Total drive power 8 kVA - Pneumatic connection 6 bar - Space requirement approx. W 2000 x H 2400 x D 2100 mm - Weight approx. 4800 kg - with: - CNC control DELEM , DA 65 - Y1 + 2 ; X ; R ; Z - Footswitch - Controlled back gauge with height adjustment 5 - 500 mm - 2 support arms - hydr. Tool clamping - Matrix table displacement pneumatically supported

pressure: 85 tchamfer lenght: 2550 mmdistance between columns: 2050 mmstroke: 365 mmcontrol: DELEM weight of the machine ca.: 10000 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 230 tchamfer lenght: 3000 mmdistance between columns: mmstroke: 365 mmNumber of working hours: 36.726 hControl: total power requirement: kWweight of the machine ca.: 17,70 tdimensions of the machine ca.: mOperating pressure: max. 305 barFollow-up time: 46 msSafety distance: 74 mmConnected load: 42.0 kVAVoltage: 3x400VRated current: 68.0 A / 50 HzPneumatics: 6 barHydraulic oil quantity: 400 lDimensions: approx. 3.65 x W 2.00 (plus support arms) x H 3.10 m• Pneumatic die displacement• Hydraulic WILA tool clamping at the top and bottom• CNC controlled crowning• Controlled axes: Y1, Y2, X1, X2, R1, R2, Z1, Z2• Delem control 2D graphics• 2 movable support arms• Preparation of ACD angle measuring system• New upper tool straight 28°/R1, H = 158mm, segmented, installed• Lower tool type EV-W40 V40/80°, length = 6 x 500 mm, installed• Operating manualOptionally, ...

TTMC ABKANTPRESSE TYP 1300 x 30 Sound -Capaciteit 1300 x 30 sound -Estun E21 besturing -2 hydraulic cilinders -Voetbediening -Fotocelbeveiliging -Noodstop -Documentatie -400V DUTCHMACH Metal processing machines ENSCHEDE-NIEDERLANDE (3 km from the German border)

UWM PRESS BRAKE/WORKSHOP PRESS TYPE UWM 100 -Capaciteit 100 ton -Max druk pomp 32 MPA -Werkslag 220 mm -Max hoogte 680 mm -Max Queen 1000 mm -Panel afmeting 500 x 1000 mm -Afmetingen 1500 x 700 x 1820 mm -Weight 1200 kg -Motor 3 KW/400V DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

pressure: 250 tchamfer lenght: mmthroat: mmstroke of ram: mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 tchamfer lenght: 2050 mmdistance between columns: 1550 mmthroat: 250 mmstroke: 200 mmadjustment of press crosshead: 200 mmstroke speed - idle stroke downwards: 105 mm/secstroke speed - idle stroke upwards: 180 mm/secstroke speed - under load: 9,5 mm/sectable width: 200 mmtable height over floor: 900 mmdayligth: 280 - 480 mmback stop - adjustable: 3 - 729 mmcontrol: CYBELEC SYNCHRO control: CNC 7400 PS total power requirement: 7,5 kWweight of the machine ca.: 10 tdimensions of machine L x W x H: 3,70 x 2,45 x 2,80 mAccessories: programmable back gauge, table extensions, various upper and lower dies segmentsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 160 tchamfer lenght: 3050 mmdistance between columns: 2550 mmControl: CYBELEC VisiTouch Pac stroke of ram: 300 mmweight: 14000 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 200 tchamfer lenght: 3050 mmdistance between columns: 2550 mmControl: CYBELEC VisiTouch Pac stroke of ram: 524 mmweight of the machine ca.: 17.000 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sell a press on behalf of the factory, which was fully functional until the plant was shut down. Pressing force 250 tons Length 3050mm Sheet thickness max 15mm A lot of accessories Dimensions transport approx. 3,2m 2m 3,5m high 20to Removal must be organized by the buyer. Crane rental nearby, it can be helped supportively.

immediately available CNC press brake YAWEI PBH160/3100-4C - Pressing force: 1600KN - bending length: 3100mm - Year of construction 2022 - CNC controlled hydraulic crowning - Cybelec Modeva 19T control - WILA upper tool clamping - 60mm table with 13.5mm x 22mm groove for insertion matrices - 2 front support arms movable on linear guide - CE with Fiessler AKAS IIF (automatic height adjustment) - 24 months warranty - Commissioning, training