used Band Saw Automatics for sale

- Cutting speed: 6 - 30 m/min - Saw blade dimensions: 400 (425) x 50 x 5 mm - Cutting range 45° flat: 180 x 40 mm - Cutting range 90° flat: 240 x 70 mm - Cutting range 90° round: 140 mm - Cutting range 90° square: 130 mm - Miter cut: infinitely variable 60 -/+ degrees - Saw blade feed speed: 0 - 1,200 mm/min - Minimum quantity lubricating system: PPS 401 115326 - Autom. Flat magazine FMA for rods: 1500 - 7000 mm - Control: Kaltenbach MULTI-COM - Chip conveyor - Total power: 5.5 kW - Machine weight: 4500 kg - Dimensions (W x D x H): 9.45 x 2.59 x 2.1 m - Power-on hours: 17290 h - Condition: very good details fully automatic universal saw, workpiece stop for inclined cuts to the left and right, work space lighting, section gripper with autom. Adjustment of the front gripper jaw, sorting device with drive, sorting of good parts, very well maintained system acce ...

cutting diameter: 250 mmsaw band length: 3150 x 27 x 0,9 mmtable height: 750 mmcutting width: 170 x 310 mmcutting speed: 25 - 90 m/min: 130 mm: 130 mm: 205 mmImpact energy: 205 mmconnected load frequency: 400 Volttotal power requirement: 1,5 kWweight of the machine ca.: 0,5 tdimensions: 0,95 x 1,16 x 1,98 mSolid band saw- Double miter cuts on the right up to 60°, on the left up to 45°- AutoCut- Vice with quick clamping device- Belt tension control- Electric automatic cooling system- Material stop max 600mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 250 mmsaw band length: 3150 x 27 x 0,9 mmtable height: 700 mmcutting width: 250 x 320 mmcutting speed: 25 - 90 m/mindimensions of saw-band: 2480 x 27 x 0,9 mm: 120 mm: 120 mm: 190 mmImpact energy: 190 mmconnected load frequency: 400 Volttotal power requirement: 1,5 kWweight of the machine ca.: 0,5 tdimensions: 0,95 x 1,16 x 1,98 mMiter cuts to 60 ° left- cutting speed 35/70 m / min.- Vice with rapid clamping device- Bandsaw blade guide made of hard metal- Band tension control- Electric cooling automatic.Currently only available in red.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 220 mmsaw band length: 2520 x 27 x 0,9 mmcutting speed: 25 - 90 m/mintable height: 915 mmcutting width: 150 x 240 mm: 90 mm: 90 mm: 150 mmImpact energy: 150 mmconnected load frequency: 400 Volttotal power requirement: 1,2 kWweight of the machine ca.: 0,35 tdimensions: 1,4 x 0,8 x 1,5 mRock solid band saw- Miter cuts up to 60°- AutoCut- Vice with quick clamping device- Belt tension control- Electric automatic cooling system- Material suggestion- Coolant pumpThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Horizontal Band Saw Machine Fabr. KASTO Type HBA 340 AU Specifications: Cutting range 90° round 340 mm Cutting area 90° flat 340 x 380 mm Saw blade length 5334 x 32 x 1.06 mm Table height 700 mm Feed length 600 mm Multiple feed 1800 mm infinitely variable cutting speed 20 - 130 m/min. Drive power 6.5 kW External dimensions L x W x H approx. 2200 x 2600 x 2000 mm Weight approx. 2.1 t with-chip conveyor used, in good condition All information to the best of our knowledge but without guarantee until the order confirmation The machine can be demonstrated at the site near Aachen.

CONTROLS  PLC TECHNICAL SPECIFICATION  max. cutting height: 360 mmELECTRICAL SPECIFICATIONS  total power consumption: 17 kWDIMENSIONS / WEIGHTS  total weight approx.: 2540 kg

cutting diameter: 360 mmsaw band length: mmcutting width: mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 420 mm, 6300 mm, 1 mm

Fully hydraulic high-performance band saw in the heaviest design, with horizontal parallel movable saw blade, for cutting profiles, tubes and solid material in all Qualities, including material that is extremely difficult to machine (e.g. Titan, Inconel, Hastelloy) Guidance of the sawing unit via two vertical square columns with hardened and ground guide rails. Hydraulic band saw clamping and hydraulically pre-tensioned Carbide band saw guides. The material is clamped by two hydraulic clamping vices. The feed length can be adjusted by means of a counter with a resolution of 0.1 mm. The material is fed via a hydraulic cylinder and ensures maximum cutting accuracy. The machine is easy to operate and is fully automatic. max. material diameter 420 mm max. feed single 6300 x 41 mm Multiple feed 9,999 mm smallest diameter to be sawn 10 mm Shortest remnant length in automatic ...

Technical data: -Cutting capacity 90 ° round 420 mm square 420 x 420 mm -Band saw blade dimensions 6300 x 41 x 1,3 mm -Cutting speed infinitely adjustable 0 x 130 m / min -hydr. Lifting - lowering of the column-guided saw frame - cut pressure infinitely adjustable 0-10 m / min -Hydr. movable work piece vise -biggest opening of Vice 480 mm -maximum passage height under the blade 480 mm -Material height approx. 700 mm -Total power 400 V / 8 kW -Hydr. Bundle clamping device -Coolant system -MOT. Spaeneraumbuerste -MOT. Chip conveyor - MOT feed roller 2000 mm -Space requirement approx. B 2200 x H 2500 / 2800 X 3200 mm -Weight approx. 3200 kg

automatic feeder: ja material length: 460 mmmaterial width: 320 mmweight of the machine ca.: 2 tdocumentation: ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 460 mmsaw band length: 5334 mmcutting width: 1,3 mmcutting range - square -: 320 x 320 mmcutting range - flat -: 500 x 320 mmcontrol: minipos 807 cutting speed: 16 - 80 m/mindimensions of saw-band: 5334 x 41 x 1,3 mmfeed length: 580 mmfeed length: multiple: 5800 mmtotal power requirement: 8 kWweight of the machine ca.: 3,5 tdimensions of machine L x W x H: 2,7 x 2,95 x 2,15 mAccessories: roller track 4150 mm length, roller track 2150 mm length, bundle clamping device, chip conveyor, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 22419 Specifications: - Cutting range at 90° approx. 260 mm - flat 260 x 260 mm - Material support height approx. 750 mm - Material replenishment machine with normal feed length up to 750 mm - Multiple feed length up to 6750 mm - Saw blade dimensions approx. 3800 x 25 x 0.9 mm - Cutting speed infinitely regulated. 18 to 110 m/min - hydr. Lifting – lowering the saw frame - Cutting pressure infinitely adjustable 0 - 10 m/min - Total drive power 400 V / 4.0 kW -Mot. Chip Clearing Brush - Hydr. movable workpiece clamping vice - Space requirement approx. W 2100 x H 1400 x D 2300 mm - Weight approx. 1300 kg

cutting diameter: 280 mmcapacity 90 degrees: flat: 280 x 280 mmdimensions of saw-band: 4930 mmcutting speed: 19 - 90 m/minclamping range: 295 mmdiameter: kleinste 16,0 mmfeed range: 6 - 600 mm/minvoltage: 400 Vtotal power requirement: 5,5 kWweight of the machine ca.: 1750 kgdimensions of the machine ca.: 2100 x 2333 x 2065 mmFurnishing:- fully automatic metal band saw- hydraulic material clamping- Single stroke 6 - 600 mm / multiple stroke max. 9,999 mm Manual setting of the section length using the handwheel with quantity specification- smallest saw diameter 16.0 mm- minimum section length 6.0 mm- Automatic mode / single cut selectable- Infinitely variable belt speed adjustment- Stepless adjustment of the feed speed- User manuel The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 280 mmsaw band length: 4930 mmtable height: 680 mmcutting width: 280 mmcapacity 90 degrees: round: 280 mmcapacity 90 degrees: flat: 280 x 280 mmcapacity 90 degrees: square: 280 mmcutting speed: 17 - 90 m/mintotal power requirement: 5,0 kWweight of the machine ca.: 1750 tdimensions of the machine ca.: 2750 x 2400 x 1850 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 260 mmsaw band length: 4115 mmcutting width: 260 mmcutting range square: 260 x 260 mmheight of material-table: 950 mmmaterial feed: 600: 3x reversierbar mmmultiple feed until: 1800 mmdimensions of saw-band: 4115 x 32 x 1,1 mmcutting speed: 15-125 m/minpower capacity saw: 4 kWcontrol: Minipos 807 min. cut-off length: 6 mmRemaining piece length: 10 / autom. 110 mmtotal power requirement: 6,5 kWweight of the machine ca.: 2 tdimensions of the machine ca.: 2,09 x 1,9 x 2,03 mCondition: ready for operation: Video(s) available on our website.: Electric 380 Volt: Chip conveyor: Cooling equipment: Material feed: NC fully automatic band saw with vertical saw band run (saw unit offpolymer concrete), cutting area around 260 mm, control Minipos 807,Clamping pressure regulation of the vices by means of a hand wheel and manometer, stepless cutting speed and cutting feed manually ...

cutting diameter: 530 mmsaw band length: 7.675 x 54 x 1,6 mmcutting width: 630 mmControl: total power requirement: kWweight of the machine ca.: 5,9 tdimensions of the machine ca.: mEquipment:CNC control KASTOChip conveyorThe new machine costs €180,000The following data is from the Kasto homepage of a current sawand may vary slightly from our machine. KASTOtec AC 5Saw type: band sawsCutting direction: straight cutAutomation: AutomaticMaterial type: Structural steels, stainless steels, tool steels, steels forspecial useMaterial width: 630 mmMaterial height: 530 mmCutting area around 530 mmSquare cutting area (H x W) 530 x 530 mmCutting area flat (H x W) 530 x 630 mmClamping range 0 – 630 mmSmallest dimension to be sawn 10 x 10 mmSmallest section length 6 mmShortest remaining piece length in automatic mode (only for geometrically perfectsurfaces possible) 35 mmShortest remaining piec ...

cutting diameter: - mmsaw band length: - mmcutting width: - mmControl: Kasto total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

With optional equipment: • Hydraulic bundle clamping • Hydraulic saw blade clamping • Roller conveyor 3m • Minimum quantity cooling • Laser cut line indicator • Clamping force regulation on the control panel

With special equipment: • Roller conveyor 3m • Minimum quantity cooling •Conveyor • Hydraulic saw blade clamping • Laser cut line indicator • Clamping force regulation on the control panel • Hydraulic bundle clamping

cutting diameter: 280 mmsaw band length: 4200 mmcutting width: 280 x 280 mmdimensions of saw-band: 4200 x 34 x 1,1 mmcutting speed: 18 - 115 m/minmultiple feeding: 0 - 6000 mmpower capacity: 3,0 kWcoolant: voltage: 400 Vtotal power requirement: 5,0 kWweight of the machine ca.: 2,3 tdimensions of the machine ca.: 2,35 x 2,40 x 2,00 m- serial-no.: 6082- control: SIEMENS COROS - OP 15- chip conveyor- multiple feeding- coolant equipment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 7367 Type: 335 GA Producer: MEBA Created: 2012 Parameters: Minimum belt feed speed: 15 m/min Maximum belt feed speed: 150 m/min Saw blade dimensions: 4400 x 34 x 1.1 mm Cutting area: 335 mm Length: 5350 mm Width: 2300 mm Height: 2000 mm Weight: 2020 kg

Band saw with program preselection for saw length and quantities Manufacturer Meba Built in 2001 Type 407 Feeding roller conveyor Laxative roller conveyor

capacity 90 degrees: round: 410 mmcapacity 90 degrees: flat: 620x410 mmrest piece length man./autom.: 30 /160 mmwork height max.: 750 mmsawband speed: 15-150 m/mmdimensions of saw-band: 5800x41x1,3 mmtotal power requirement: 9,0 kWweight of the machine ca.: 3210 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

dimensions of saw-band: 2910 x 27 x 0,9 mmcapacity 90 degrees: round: 240 mmcapacity 90 degrees: flat: 310 x 240 mm: 200 mm: 200 x 200 mm: 200 mm: 200 x 200 mm: 140 mm: 200 x 140 mmrest piece length: 60 mmwork height max.: 900 mmdimensions: 800 x 1750 x 1500 mmweight of the machine ca.: 470 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 335 mmdimensions of saw-band: 4400x34x1,1 mmtable height: 750 mmmin. dia.: 5 mmcapacity 90 degrees: round: 335 mmcapacity 90 degrees: flat: 500x335 mmcutting speed: 15-150 m/minclamping range bunching voltage: 0-500 / 15-335 Breite / Höhe: 0-600 / 0-6000 Einf. / Mehrf.weight of the machine ca.: 1600 kgdimensions of the machine ca.: 2230x2350x1900 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 230 mm: 230 x 230 mmsaw band length: 2950 x 27 x 0,9 mmtable height: mmband speed: 15 - 100 m/mintotal power requirement: 2,2 kWweight of the machine ca.: 1,2 tdimensions: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bend Saw Automatic MEP SHARK SX DUTY used machine in good working condition . Price on request

cutting diameter: rund 250 mmcutting diameter: vierkant 230 mmcutting diameter: flach 280 x 200 mmdimensions of saw-band: 2950 x 27 x 0,9 mmsawing stroke: 290 mmweight of the machine ca.: 610 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 250 mmsaw band length: 2950x27x0,9 mmtable height: mmband speed: 36/72 m/mintotal power requirement: 1,8 kWweight of the machine ca.: 440 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 250 mmcapacity 90 degrees: flat: 280 x 220 mmcapacity 90 degrees: square: 220 x 220 mmvice: 285 mmturning speed range:: 36/72 m/mindimensions of saw-band: 2950x27x0,9 mmtotal power requirement: 1,5 / 1,8 kWweight of the machine ca.: 485 kgdimensions of the machine ca.: 1700 x 1000 x 1800 mmElectro-hydraulic semi-automatic band saw SHARK 282 SXI EVOThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 250 mmcapacity 90 degrees: flat: 280 x 220 mmcapacity 90 degrees: square: 220 x 220 mmvice: 285 mmturning speed range:: 36/72 m/mindimensions of saw-band: 2950x27x0,9 mmtotal power requirement: 1,5 / 1,8 kWweight of the machine ca.: 485 kgdimensions of the machine ca.: 1700 x 100x 180 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 280 mmsaw band length: 3320 x 27 x 0,9 mm mmcutting width: 330 mmControl: NC capacity 90 degrees: flat: 330x 260 mmcapacity 90 degrees: square: 260 x 260 mmband speed: 15 - 100 m/mintotal power requirement: 2,2 kWweight of the machine ca.: 1,24 tdimensions of the machine ca.: 3,3 x 2,83 x 2,23 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 300 mmsaw band length: 3320 x 27 x 0,9 mmtable height: mmband speed: 40/80 m/mintotal power requirement: 1,5/1,8 kWweight of the machine ca.: 670 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 300 mmsaw band length: 3320 x 27 x 0,9 mm mmcutting width: 300 mmControl: NC capacity 90 degrees: flat: 330x 260 mmcapacity 90 degrees: square: 260 x 260 mmcapacity 45 degrees: square: 250 mmcapacity 45 degrees: flat: 270 x 200 mmcapacity 60 degrees: round: 180 mmcapacity 60 degrees: square: 170 mmband speed: 15 - 100 m/mintotal power requirement: 2,2 kWweight of the machine ca.: 1,1 tdimensions of the machine ca.: 3,3 x 2,83 x 2,23 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 300 mmcapacity 90 degrees: flat: 330 x 260 mmcapacity 90 degrees: square: 260 x 260 mmcapacity 45 degrees: flat: 270 x 200 mmcapacity 45 degrees: round: 260 mmcapacity 45 degrees: square: 250 x 250 mmcapacity 60 degrees: flat: 170 x 170 mmcapacity 60 degrees: square: 170 x 170 mmcapacity 60 degrees: round: 180 mmturning speed range:: 40 / 80 m/mindimensions of saw-band: 3320 x 27 x 0,9 mmengine output: 1,5 / 1,8 kWweight: 670 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 355 mm: 350 x 350 mmsaw band length: 4640 x 34 x 1,1 mmband speed: 15 - 115 m/mintotal power requirement: 5,5 kWweight of the machine ca.: 2,8 tdimensions: 3,2 x 2,2 x 2,7 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 355 mm: 350 x 350 mmsaw band length: 4640 x 34 x 1,1 mmtable height: mmband speed: 15 - 115 m/mintotal power requirement: 4,0 kWweight of the machine ca.: 2,8 tdimensions: 3,1 x 2,2 x 2,2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 330 mmcapacity 90 degrees: flat: 510 x 320 mmcapacity 90 degrees: square: 320 x 320 mmturning speed range:: 40 / 80 m/mindimensions of saw-band: 3440 x 27 x 0,9 mmengine output: 1,5 / 1,8 kWweight: 670 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Band saw fully automatic automatic band saw horizontal MEP SPA Shark 320 AX Location of the machine: 76661 Philippsburg The machine can be viewed on site. It works perfectly. You can arrange a viewing appointment at any time. We'd love to hear from you.

Key data: 280 mm

automatic feeding, chip conveyor, L-310, W-210, H- 180cm

roll diameter: / mmthroat: / mmworkpiece height: / mmcutting diameter: / mmsaw band length: / mmtable-size: 600 x 600 mmtotal power requirement: / kWweight of the machine ca.: ca. 650 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical data:-Roll diameter 420 mm -Throat depth 410 mm -Max volume height 265 mm -Table size 600 x 600 mm -Table li. + re. Tiltable 15 / 30 ° -Table height 1020 mm -Blade length 3150-3260 mm -Saw band width 3-16 mm -8 speeds 12-375 m / min -Drive: 400 V / 1.1 / 1.7 kW -Weight approx. 650 kg -Space requirement approx. B 900 x H 1900 X 1000 mm -with: - blade welding machine in the machine base - grinding wheel and lamp -Scissors, air pump and lighting

roll diameter: 500 mmthroat: 1050 / 485 mmworkpiece height: 300 mmsaw band length: 3920 - 4050 mmcutting speed: 15 - 940 m/mintable height: 1040 mmtable surface area: 750 x 800 mmTable tiltable: 15 Gradtotal power requirement: 4,0 kWweight of the machine ca.: 1750 kgdimensions of the machine ca.: 2100 x 1000 x 2100 mm- Fully automatic miter band saw- MAC 90 control- Saw feed infinitely adjustable via precision throttle- Infinitely adjustable clamping pressure- Infinitely variable speed adjustment of the saw band- hydraulic bundle clamping- chip conveyor- Cooling device- Micro dosing device- Machine lightThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 290 mmsaw band length: 4000 x 27 x 0,9 mmcutting width: 300 mmband speed: 20 - 100 m/min: 290 mm: 290 x 300 mmcapacity 45 degrees: round: 260 mmcapacity 45 degrees: flat: 280 x 240 mmtotal power requirement: 2,2 kWweight of the machine ca.: 1050 kgdimensions of the machine ca.: 1800 x 1900 x 1750 mm- Fully automatic electro-hydraulic band saw- electric feed unit - max. feed 520 mm- front control panel- electro-hydraulic material clamping- semi-automatic & automatic mode selectable- Miter cuts - Automatic operation up to 45° right- Miter cuts - Semi-automatic operation up to 60° right- stepless adjustment of the saw blade speedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical data: -Saw blade size 300 mm -Blade rotation speed 2800 RPM -Section - 90 ° 160 x 20 mm 100 x 80 mm -at 45 ° 100 x 40 mm -Adjustable miter vise -Drive 380 V / 1,5 kW - space requirement approx. B H 400 x 1400 X 700 mm -Weight approx. 80 kg -with:-vert. -Vice - machine stand -Feed roller 2000 mm -Evacuation roller conveyor with MaÃ? attack with analog display via Handwheel movable 3100 mm

roll diameter: / mmthroat: / mmworkpiece height: / mmTable dimensions: 615x615mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 270 mmsaw band length: 3660 mmcutting width: 0.85 mmcutting speed: 20-95 m/mintotal power requirement: 2 PSweight of the machine ca.: 1.1 tdimensions of the machine ca.: 200x170x145 cm x cm x cmSaw blades: 6 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Specifications: - Automatic workflow cutting process, hydr. Raising / lowering the saw frame , - mitre adjustment with hydr. Clamping - Saw blade dimensions 4400 x 32 x 1.1 mm - Cutting speed infinitely adjustable 12 - 115 m/min - Infinitely variable cutting pressure regulation - Infinitely variable lowering speed control - Cutting area - at 90° approx. 420 mm flat 420 x 500 mm - at 45° approx. 305 mm flat 360 x 305 mm - at 30° approx. 215 mm flat 360 x 215 mm - Material replenishment machine with multiple stroke -Conveyor - Micro spray - cooling lubrication - Feed roller conveyor 4000 mm - Discharge roller conveyor 2000 mm - Drive 400 V / 3.5 kW - Space requirement approx. W 2250 x H 1850 x D 2200 mm - Weight approx. 1700 kg

Key data: 360 mm, 4400 mm, 430 mm

suitable for mitre cuts on one side Cutting range at 90°: approx. 360 mm; flat 430 x 360 mm Cutting range at 45°: approx. 305 mm; Cutting range at 30°: approx. 215 mm Cutting speed 12 - 115 m/min infinitely variable Infinitely variable control of the cutting speed Hydraulic material clamping Hydraulic cutting pressure regulation Chip brush Saw blade 4400 x 32 x 1.1 mm Upper dead center of the saw bar can be selected via adjustable limit switch Connected load approx. 3 kW Incl. coolant device, minimum quantity lubrication, 2 x roller conveyor each approx. 3 m, material stop, Manual, CE Conformity

cutting diameter: Ø 520/ 520 x 520 mmsaw band length: 7250 x 50 mmcutting width: 1,6 mmcutting speed: 16- 90 m/minpower requirement: 11 kWdimensions: mfeed in one step: 520 mmmultiple feeding length: 2080 mmfeed speeds infinitely variable: 0- 400 mm/minweight of the machine ca.: 3,5 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.