ELUMATEC used machine for sale

DG 244 by Elumatec 6m 580/5 . in mint condition. Under 500 hours of work. Original price € 110,000.00 net ex works Elumatec. For more information, please call us. The price is from stock Baku excluding transport costs and dismantling. It can also be done on request including delivery to DE.

SBZ 140 Profile machining centre 6,4m 4-axis from Elumatec.

SBZ 630/11/R machining center from Elumatec in mint condition. The machine has only been put into operation by Elumatec, otherwise never used. Original price € 636,000.00 net ex works Elumatec. For more information, please call us. The price is from stock Baku excluding transport costs and dismantling. It can also be done on request including delivery to DE.

Press height 140 mm Pressing force 70 kN (7 t) Hydropneumatic actuator Compressed air connection 7 bar Air consumption per stroke 35 l Length 1,100 mm, depth 950 mm, height 1,230 mm Weight 550 kg

Powerful double mitre saw, ideal for mass cuts of plastic and aluminium profiles at 90° or 45°. Saw blade diameter 550 mm, 4,500 mm length, and 1-axis control E 590/1. Proven elumatec principle of "sawing from below" for optimum accessibility and the best possible use of the saw blade. - Minimized calculation effort thanks to external dimension cut. - Pneumatic angle positioning 90° or 45". - Protective shields with automatic lowering over the sawing areas. - Standard with suction nozzle at the top and bottom. - Steel machine bed in post-and-beam construction. PC control E 590/1: - Industrial PC 1-axis control E590/1 for the cutting length (X-axis) - Drive-independent absolute measuring system - Pneumatic locking in position - Robust, low-wear direct drive of the mobile sawing unit - Ergonomic arrangement of the control unit - Positioning accuracy +/-0.1 mm pe ...

Elumatec cutting and machining center model SZB 620 Capacity: 120 units/change SBZ 610 (cutting + machining module for machining in pvc profials) SBZ 610 to SBZ 609 (manual steel insertion) with label printer SBZ 609 (reinforcement screwing, pvc + steel machining) Receiving table. The scope of processing in pvc: holes for drainage, venting, the importance of places for the installation of perimeter catches, milling holes for the installation of ventilators. Screwing steel reinforcements. The scope of processing in pvc + steel: holes for mounting the handle in the window, for mounting the post, holes for dowels. Very good technical condition, the machine has been working since 2017.

offer 22556 Specifications: - Saw blade diameter 420 mm - Saw blade bore 30 mm - cutting length 3000 mm - smallest cutting length at 90° + 45° 335 mm - Intersection area see diagram attached - Swivel range inwards manually 90 - 22.5 ° - Tilt range inwards manually 90 - 45 ° - Saw blade speed 2800 rpm - Drive 380 V / 2 x 4000 Watt - Compressed air connection 7 bar - Air consumption per working stroke approx. 64 l - Space requirement approx. W 4500 x H 1950 x D 1600 mm - Weight approx. 1400 kg - with: - Cutting length adjustment with positioning control - Positioning control renewed approx. 2002 by WOLFF - Saw unit swivel and tilt for high and wide profiles, - as well as cut-outs

Manufacturer Elumatec type MGS 142 Overhaul year: 2019 Year of construction: 1995-2018 Blade Max carbide: 500 mm Power saw motor: 4 KW Speed saw motor: 2800 min-1 Cutting speed blade 500 mm: 4400 m / min Saw height control: continuously variable, electronically Workspace Vierkant90 ° Max: 130 x 130 mm flat workspace: 90° Max: 190 x 130 mm work area round: 90 ° Max: 150 mm pneumatic supply length: 5-560, 10-1120 mm Compressed air connection, by the customer 6 bar Gewicht(Säge)CA.: 800 kg Dimensions Lxwxh (saw) about: 2900mm x 1400mm x 1500mm footprint Lxw: 2900 mm x 1400 mm additional description Elumatec SA 142 4KW straight cutting retrofit Elumatec SA 142 4KW straight cutting retrofit Fully automatic saw machines for non-ferrous metal and plastic The machine is both technically and optically after completed retrofit in mint condition. The machine will be  ...

Reconditioned 2018 Control: PLC Siemens S7 Blade max: 500 mm Motor output 5.5 KW Saw blade feed: 0-40 mm / s adjustable Saw height control electronic Square 90° maximum working range: 130 x 130 mm Flat 90° maximum work area: 190 x 130 mm Round 90° maximum working range: 170 mm Supply length 2-4000 mm (Saw) approximate weight: 800 kg (Pusher) approx.: 300 kg Dimensions Lxwxh (saw) approx.: 900mm x 1200mm x 1500mm (pusher) approx.: 4800mm x 900mm x 1100mm footprint Lxw 7200 mm x 1200 mm which is machine overhauled in our House and is then in a like-new condition. Among others were renewed following points: -New PLC control -Conversion to Elgo positioning system -New electric components -New pneumatic lines -New pneumatic components -Overhaul of the valve Terminal -Built-in Menzel minimal lubrication system -Replacing common wear parts -Overhaul of cabin -Overhaul ...

Swivel range inwards: 90°-45°, saw blade diameter: 500mm, min. cutting length: 400mm at 90° and 45°, max. cutting length: 6000mm, saw blade speed: 2800rpm. Air consumption per cycle with/without spraying: 64l/40l. Documentation available. On-site inspection is possible.

Rotational speed: 15,000/min, max. compressed air supply: 5-8bar.

Compressed air supply: 6-8bar, with documentation, without accessories, was maintained regularly, the machine is not functional, the software is defective.

X-travel: 3850mm, y-travel: 350mm, z-travel: 280mm, working length: 3850mm, max. feed rate y and z/ x-axis: 30/ 50m/min, positioning accuracy: +/- 0,1mm, milling spindle rotational speed: 1-21.000/min, with electronic three-axis industrial PC-controls of which 2 axes as path control, with color screen and disk drive, barcode scanner and label printer.

Profile length: 500-7500mm, max. rotational speed: 22.000/min, the machine should be overhauled.

cutting diameter: siehe Diagramm mm cutting range min.: siehe Diagramm mm saw blade diameter: 420 mm cutting length: 350 - 6000 mm Control: Positionierst. E390 Number of axles: 3 St. total power requirement: 8,6 kW weight of the machine ca.: 1780 kg very good condition, as good as new smallest cutting length at 90° 350 mm Smallest cutting length at 45° inclination 350 mm Inward inclination range pneumatic 90°-45° Inward tilt range electric 90°-22.5° Cutting range see cutting diagram Saw blade speed 2,800 1/min. Compressed air connection 7 bar Air consumption per work cycle 40 l without spraying, 64 l with spraying Equipment: Profile lifting bars for stat. and mov. unit Mobile workpiece support Moving roller conveyor 1500 x 300 mm Positioning control E 390 Optimum double mitre saw for series production and special construction The universal pivoting and tilting of the saw units ena ...

Description: Processing length approx. 2800 mm Profile support max. approx. 3100 mm Profile depth max. approx. 100 mm Tool changer ,8-fold Machine screen has been replaced by external screen Approx. Onsite Dimension. (l x w x h): 8,840 x 2,400 x 2,300 mm, weight approx.: 6,000 kg

CNC machining center, Manufacturer: ELUMATEC, Type: SBZ 122/30, Year of manufacture: 2005, Serial No.: 1223030045, Connected loads: 16 kW, 21,000 rpm, Tool changer, Accessories

Electric motor, three-phase motor -Manufacturer: elumatec, electric motor type 104100408 from double miter saw DG 204 -Power: 4 kW -Speed: 2800 rpm -Shaft: Ø 20 x 32 mm -Quantity: 2x motor available -Price per piece -Dimensions: 320/190/H185 mm -Weight: 16.7 kg/pc.

Stop for cross-cut saw, pull saw, stop and measuring system, cutting length adjustment control panel, manual cutting length adjustment -Manufacturer: elumatec, control panel E 110 for cutting length adjustment -Type: 54.500.230.TG.Sn 023 -Dimensions: 105/105/H75 mm -Weight: 0.6 kg

Control unit Elumatec X-Axis travel 6700 mm Y-Axis travel 350 mm Z-Axis travel 280 mm Table length 6700 mm Spindle speed 24000 rpm Tool holder HSK-F63 Routing spindle with integrated rotation unit (0°, -90°, -180° and -270°) for angle head Dimensions L 8450 x W 3400 x H 2560 mm Weight 3400 kg

This ELUMATEC SBZ 122 Universal Machining center was manufactured in the year 2005. It is equipped with an Elumatec E 550 control unit. The machine has a spindle speed of 21000 rpm and comes with a suction unit.

This Elumatec SBZ 616/02 Sawing machine was manufactured in the year 2018 in Germany. It is equipped with a Elumatec control unit. The machine has a maximum cutting length of 6800 mm.

This ELUMATEC DG 104/02 E255 Sawing Machine was manufactured in 1996 in Germany. It has a max. saw blade of 2800 rpm, a max. power of 4000 W (each motor) and can operate with an inner tilt of 90-45 degrees. See photo gallery for more details. Contact us anytime for further questions!

Corner cleaning machine - ELUMATEC Very good Year: 2003

Single head welding machine - ELUMATEC crushed arms and wrinkled one piece of cover Year: 2003

Spindle copy router - ELUMATEC Very good Year: 2003

End milling machine - ELUMATEC Very good Year: 2003

3-axis machining center for aluminum or PVC profiles Maximum X-axis travel: 3850 mm Maximum Y-axis travel: 350 mm Maximum Z-axis travel: 280 mm E550 control unit Light barrier Tool clamping system: HSK-F63 maximum speed: 21,000 rpm Weight: approximately 1800 kg Space requirements: Length: 5100 mm Width: 3400 mm Height: 2540 mm

Stop for chop saw, pull saw, stop and measuring system -Manufacturer: elumatec, stop and measuring system with digital display -Inclusion: Bosch profile -Length unit: 4280 mm -Price: complete -Dimensions: 4710/510/H635 mm -Weight: 72kg

Number of axis : 4 8 Tool Holders 8 Right 8 Left Adjustable 16 Clamp 4 Ground Fixed Security Sensors Windows OS (Software Elucam) X : 6000 mm Y :845 mm Z : 620mm Spinder Speed 24000 11 kW Chip Drawers Available