For fast and high-quality cutting of metal without processing after cutting, you need a fiber laser machine. Fiber lasers are currently the last word of science and technology not only in the field of metal processing, but also the brightest achievement in modern laser physics and fiber optics. Fiber laser emitters have a number of advantages compared to traditional lasers: • effective heat removal; • high quality of output radiation; • stability and reliability of the laser, and as a result – an order of magnitude longer working time; • pumping efficiency; • compactness and light weight ADLT 1530T fiber laser is equipped with Raycus|Maxphotonics sources of the following capacities 1000W | 1.5 kW | 2kW | 3kW | 4kW | 6kW | 8kW | 10kW | 12kW| Application materials: Metal: carbon steel, stainless steel, durairon, titanide, galvanized, aluminum, copper.
The plasma cutting machine is designed for automated high-precision shaped cutting of stainless steels, ferrous and non-ferrous metals and alloys by the plasma cutting method. The quality of the cut, the accuracy of the geometry of the parts, and the repeatability of the machine make it possible to produce finished high-quality products that do not require any post-processing. Allows high-speed plasma cutting of rolled metal sheets up to 6 m long and up to 60 mm thick. Processing area (X, Y, Z), mm - 2050 6050 150 Construction - Movable portal Table type - Air-plasma cutting Feed mechanisms - ball screw transmission along the Z axis, polished helical rack - X and Y axis Guides - HIWIN square linear guides, accuracy class H The maximum load on the table, kg - 2500 Max. speed of movement X, Y, m/min - 20 Max. movement speed Z, m/min - 5 Working speed, m/min - 10 Accuracy ...
The ADF 0808 METAL milling machine is designed for processing steel, cast iron, and non-ferrous metals. The basis of the machine is a massive and rigid frame weighing 2.8 tons. The vibration-absorbing properties of the structure, its increased wear resistance and resistance to plastic deformation allow processing of ferrous metals in long-term modes. The guides and SHP have corrugation protection, which allows you to effectively protect the parts of the machine from dust, chips and coolant. The high precision of the machine is ensured not only by milling the places and the plane of the table, but also by their grinding. The design of the machine with a moving table has a positive effect on the processing modes and quality of the products. ADF 0808 has an automatic system of lubrication of seams and guides, which simplifies the maintenance of the machine. At the request of the cu ...
The plasma cutting machine is designed for automated high-precision shaped cutting of stainless steels, ferrous and non-ferrous metals and alloys by the plasma cutting method. The quality of the cut, the accuracy of the geometry of the parts, and the repeatability of the machine make it possible to produce finished high-quality products that do not require any post-processing. Processing area (X, Y, Z), mm - 1550 3050 150 Construction - Movable portal Table type - Air-plasma cutting Feed mechanisms - ball screw transmission along the Z axis, polished helical rack - X and Y axis Guides - HIWIN square linear guides, accuracy class H The maximum load on the table, kg - 1500 Max. speed of movement X, Y, m/min - 20 Max. movement speed Z, m/min - 5 Working speed, m/min - 10 Accuracy of movement, not less, mm - 0.09 Drive of linear movements - Power stepper motor Belt reducer M ...
Table-top CNC milling machine ADF 3040mini One-piece frame made of polymer concrete The design is a monobloc with a moving aluminum table. Working area with noise and dust protection • Processing zone X, Y, mm - 300400 • Z axis stroke, mm - 100 • Workpiece fixation – Mechanical • The material of the table covering is aluminum D16T • Feeder mechanisms – 1605-X, Y, 1204-Z • Positioning accuracy, mm – 0.05 • Spindle – 1.5 kW air cooling • Spindle revolutions, rpm - up to 24,000 • Collet type – ER 11 • DDCS V3.1 controller • Drive of linear movements - power stepper Nema23 motor • Power supply, V - 220 • Term of warranty service, month – 12 • Non-contact inductive sensors on all axes • Tool height sensor LED - illumination of the working area Tray for collecting shavings Built-in control cabinet Hermetic processing area ...
The ADF 1320 Stone milling machine is designed for high-quality milling and engraving of stone and metal in 2D/3D planes. PROCESSING MATERIALS Stone (marble, granite, etc.), wood, composite materials, polystyrene, non-ferrous metal, plexiglass, model plastic, etc. APPLICATION Ritual services: Simple and complex reliefs with artistic carvings, bas-reliefs, sculptural compositions, memorials, etc. Interior decoration: Elements of fireplaces and billiard tables, stairs, plinths, parquet, etc. Exterior decoration: Figured moldings on windows and doors with carving through. Decorative elements for decorating wooden houses and baths. Board balusters for finishing verandas and gazebos, fences, etc. Exclusive wood and metal products: Frames for mirrors, panels, figures of people and animals, souvenir products, boxes, chess, backgammon, icons, writing sets, watche ...
CNC milling machine ADF 0230Pro is designed for high-speed cutting and milling of aluminum profiles and any other non-ferrous metals. All-welded frame of the machine, with vibro annealing Fully enclosed and protected working area, visual contact with the cutting area • Processing zone X, Y, mm - 3003200 • Z axis stroke, mm - 240 • Fixation of the workpiece – Pneumatic clamps – movable along the guides, 4 pcs. • Feed mechanisms - helical rack along the X and Y axis mod. 1.25, ball screw gear 2005 – Z • Drives of linear movements - Servo motor, 750 W • Positioning accuracy, mm – 0.05 • Spindle – 7.5-9 kW air cooling • Automatic tool change function, 6 tool holders - ISO30 • Professional control, NC Studio V15 (Lambda-4S control board, increased processing performance) • Planetary gearbox • Spindle revolutions, rpm - up to 24,000 • Collet ...
For fast and high-quality cutting of metal without processing after cutting, you need a fiber laser machine. Fiber lasers are currently the last word of science and technology not only in the field of metal processing, but also the brightest achievement in modern laser physics and fiber optics. Fiber laser emitters have a number of advantages compared to traditional lasers: • effective heat removal; • high quality of output radiation; • stability and reliability of the laser, and as a result – an order of magnitude longer working time; • pumping efficiency; • compactness and light weight ADLT 1530 fiber laser is equipped with Raycus|Maxphotonics sources of the following capacities 1000W | 1.5 kW | 2kW | 3kW | 4kW | 6kW | 8kW | 10kW | 12kW| Application materials: Metal: carbon steel, stainless steel, durairon, titanide, galvanized, aluminum, copper.
CNC fiber laser machine for cutting pipes and tubes of round, square and complex cross-sections and cutting holes in them of various shapes. ADRT 0262 is equipped with Raycus sources of the following capacities of 500 W; 750 W; 1000 W; 1500 W; 2000 W; 3000 W; 4000 W; 6000 W; 8000 W; 10000 W; 12000 W. • Processing length – 6200 mm • Laser source – Raycus • Type of cooling – S&A” chiller • Laser head – Raytools (Swiss) • Accuracy of repeated positioning - ≤ 0.05 mm • Supply voltage – 380 V • Servo motors, 750W • Gearbox type - Planetary • Square linear guides on all HIWIN axes • Feed mechanism - polished helical rack along the Y axis, along the Z and X axes - SHP • WEIHONG (Autonomous rack) • Automatic pipe support • Autofocusing of the laser head • Centralized system of automatic lubrication of moving m ...
CNC milling machine ADF 1630ATС is designed for high-speed curved cutting of materials made of wood and any wood derivatives, plastics and other polymers, plexiglass, composites and foam. The functionality of this machine allows you to process any materials up to and including non-ferrous metals. The automatic tool change function allows you to optimize working time in production by writing one control program for all operations of up to 6 tools. • Processing zone X, Y, mm - 16003050 • Travel of the Z axis, mm - 220 • Fixation of the workpiece – Vacuum clamping system of the workpiece • Vacuum pump - oil-free, 5.5 kW • Feed mechanisms - helical rack along the X and Y axis mod. 1.25, ball screw gear 2005 – Z • Drives of linear movements - Servo motor, 750 W • Positioning accuracy, mm – 0.05 • Spindle – 7.5-9 kW air cooling • Automatic tool replacemen ...
Fiber Laser welder 3 kW with cutting and cleaning functions ADLCW 3 in 1 - Factory new - 3 working modes - Welding | Cleaning | Cutting - Warranty period - 1 year - Service - Technical support, possible even after warranty service The price is shown without VAT. Creates smooth joints that achieve strength basic material. ADLCW machine with stable performance that allows their use even under specific conditions. The machine is easy to operate and do not take up much space and can be easily transported. Laser wavelength - 1064 ~ 1080 nm Pulse frequency - 5000~10000 Hz Cooling method - Water cooling (Chiller) Laser type - Fiber Laser generator - Raycus Guidance and positioning system - Red Point Temperature of the cooling water - 5-45℃ Length of the output fiber - 5/10/15m (optional) Processing width (for cleaning) - 10-80 mm Working temperature - 0-40 ℃ ...
Fiber Laser welder 2 kW with cutting and cleaning functions ADLCW 3 in 1 - Factory new - 3 working modes - Welding | Cleaning | Cutting - Warranty period - 1 year - Service - Technical support, possible even after warranty service The price is shown without VAT. Creates smooth joints that achieve strength basic material. ADLCW machine with stable performance that allows their use even under specific conditions. The machine is easy to operate and do not take up much space and can be easily transported. Laser wavelength - 1064 ~ 1080 nm Pulse frequency - 5000~10000 Hz Cooling method - Water cooling (Chiller) Laser type - Fiber Laser generator - Raycus Guidance and positioning system - Red Point Temperature of the cooling water - 5-45℃ Length of the output fiber - 5/10/15m (optional) Processing width (for cleaning) - 10-80 mm Working temperature - 0-40 ...
Fiber Laser welder 1 kW with cutting and cleaning functions ADLCW 3 in 1 - Factory new - 3 working modes - Welding | Cleaning | Cutting - Warranty period - 1 year - Service - Technical support, possible even after warranty service The price is shown without VAT. Creates smooth joints that achieve strength basic material. ADLCW machine with stable performance that allows their use even under specific conditions. The machine is easy to operate and do not take up much space and can be easily transported.
Fiber Laser welder 1,5 kW with cutting and cleaning functions ADLCW 3 in 1 - Factory new - 3 working modes - Welding | Cleaning | Cutting - Warranty period - 1 year - Service - Technical support, possible even after warranty service The price is shown without VAT. Manual laser welding devices with optical fiber laser emitters are the latest development in the field of welding technologies, which replaced argon arc welding. They are used for welding such metals as stainless steel, iron, aluminum and other metals.
