DECKEL used machine for sale

x-travel: 290 mm y-travel: 150 mm z-travel: 330 mm table surface area: 210 x 600 mm total power requirement: 9,5 kVA weight of the machine ca.: 730 kg dimensions of the machine ca.: 2000 x 2200 x 1655 m The machine is in very good condition and comes from a from a training workshop. Equipment: Safety cover and LED lamp retrofitted in 2016 3-axis active digital readout made by Heidenhain Fixed angle table Coolant equipment Technical data: Longitudinal table movement, motorised / manual 290/300 mm Headstock transverse movement, motorised / manual 150/160 mm Vertical support movement, motorised / manual 330 / 340 mm Work spindle drive 1.5/1.9 kW Number of milling spindle speeds 16 Speed range 40 - 2000 1/min. Horizontal milling spindle Tool holder Standard taper 40 Feed range infinitely variable 5 - 500 mm/min. Creep speed 4 mm/min. Rapid traverse 1200 mm/min. The data for this ad was cre ...

x-travel: 290 mm y-travel: 150 mm z-travel: 330 mm table surface area: 210 x 600 mm total power requirement: 9,5 kVA weight of the machine ca.: 730 kg dimensions of the machine ca.: 2000 x 2200 x 1655 mm The machine is in very good condition and comes from a a training workshop. Equipment: Safety cover and LED lamp retrofitted in 2016 3-axis active digital readout from Heidenhain Fixed angle table Coolant equipment Technical data: Longitudinal table movement, motorised / manual 290/300 mm Headstock transverse movement, motorised / manual 150/160 mm Vertical support movement, motorised / manual 330 / 340 mm Work spindle drive 1.5/1.9 kW Number of milling spindle speeds 16 Speed range 40 - 2000 1/min. Horizontal milling spindle Tool holder Standard taper 40 Feed range infinitely variable 5 - 500 mm/min. Creep speed 4 mm/min. Rapid traverse 1200 mm/min. The data for this ad was created wi ...

x-travel: 800 mm y-travel: 400 mm z-travel: 300 mm digital readout: Heidenhain table surface area: 1000 x 520 mm turning speed range: 40 x 2000 U/min spindle taper: SK 40 total power requirement: 2,2 kW weight of the machine ca.: 2,2 t dimensions of the machine ca.: 1700 x 1600 x 1800 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 500 mm y-travel: 400 mm z-travel: 400 mm digital readout: Heidenhain 3 Achsen spindle taper: SK 40 spindle turning speed range: 50 - 2500 U/min table-size: 650 x 375 mm weight of the machine ca.: 1,5 t dimensions: ca. mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Rotary encoder, tachometer, encoder -Spare part comes: from a machining center cover type FP3A -Number: 1x speedometer available -Price: per piece -Dimensions: 83/122/H95 mm -Weight: 1.1 kg

Flat belt pulley, toothed pulley, multi-belt pulley -Spare part comes: from a machining center cover type FP3A -Diameter: 80 mm -Recording: 28 mm -Dimensions: 80/80/H61 mm -Weight: 1.2 kg

Chip collecting tray, cabin, housing, machine housing - Origin: from a machining center Deckel type FP3A -Machine housing material: aluminum profile and plexiglass -Transport dimensions: 975/850 / H940 mm -Weight: 66 kg

Control panel, control unit, control panel, control panel, control unit, keyboard, screen, control -Spare part comes: from a machining center cover type FP3A -Manufacturer: Lid -Type: TNC 355 -Dimensions: 600/750/H475 mm -Weight: 32 kg

Cross table, cross slide table, clamping table, clamping plate with T-slots, clamping angle -Cross table for lid type: KF12 -Table surface: 400 x 400 mm -Travel: x 50 mm/y 65 mm -Weight: 60 kg

Spiral milling device, dividing head, dividing attachment, rotary table, rotary table -Admission inside: SK40 -Tip height: 65 mm -Distance between centers: 440 mm -Passage: Ø mm -Reversing coupling for: left u. Right spiral -Pivotable for conical spirals: 0 - 45 ° -Dimensions: 760/430/H310 mm -Weight: 61 kg

Rotary table, rotary indexing table, dividing head, dividing head -Clamping surface: Ø 305 mm -Height: 120 mm -Dimensions: 420/370/H120 mm -Weight: 50 kg

Dividing head, spiral milling device with all accessories -comes: from a lid FP2 -Part head with: counter bearing -Change gears -dividing disks -Distance between centers: 415 mm -Take: SK40 -suitable for: milling cutter grinding -Translation: 1:40 -Part head: swiveling -Dimensions: 820/390/H440 mm -Weight: 80 kg

max. grinding diameter: 238 - 620 mm grinding length: 190 mm workpiece length: 380 - 940 mm current capacity: 380 kVA power capacity - grinding motor: 1,1 kW speeds of grinding spindle: 2 - 10.000 U/min total power requirement: 2,2 kW Mechanic: very good: Optical condition: very good: Condition: general reconditioning: The machine can be viewed under current.: operating key and instruction: ! We have almost all spare parts for Deckel S 11 machines in stock ! Machine and accessories overhaul year of construction 2023 with CE marking and 12 months warranty (domestic)! LID S 11 TOOL GRINDING MACHINE - UNIVERSAL 400 V, 50 Hz, with CEE plug and cable Color: 2 K new paint Stand RAL 7005 mouse gray Body and accessories RAL 7035 light gray Motorized height adjustment, axial grinding spindle adjustment Complete electrical conversion includes: > Fi circuit breaker > New three-p ...

X-axis 1000 mm Y-axis 800 mm Z-axis 500 mm Table dimensions 1250 x 800 mm Max weight on the table 1200 kg Admission in spindle (ISO) SK 40 Power on the spindle 15 kW Control Dialog 112 Toolchanger yes Number of toolholders 30x Number of rotations 15 000 rpm Power principal motor 50 kVa Length 4090 mm Depth 3890 mm Height 2960 mm Weight 9 ton Cooling-system yes

Engraving machine DECKEL GK21 work table: 350 x 200 mm stencil table: 500 x 300 mm x travel: 150 mm y travel: 300 mm z-travel: 350 mm speed range: 750 to 9500 rpm motor: 0.37 kW 1390 rpm 220 / 380 V 3AC 50 Hz with extensive accessories ! used, checked! Dimensions: 1350 x 1180 x 1610 mm

Engraving milling machine DECKEL type G1L Pantograph, pantograph Masch. Item no.: 75021 Year of construction approx. 1970 Milling table 500 x 200 mm Stencil table 530 x 320 mm Spindle speed approx. 4000 - 15000 rpm. 8 levels Gear ratio 1:1 to 1:50 infinitely adjustable Tool holder 4 mm Collet Motor power 0.85 kW Mains connection 380 volts, 50 Hz. - pantograph - letters and sets of numbers - various burrs - mobile on fixed rollers - operating instructions - adjacent accessory cabinet L x W x H 600 x 380 x 800 mm Space requirements Engraving milling machine L x W x H 1000 x 700 x 1300 mm Weight engraving milling machine 270 kg Weight accessory cabinet 60 kg (with contents) good condition; used

Ref. -No.: 10144 Manufacturer: DECKEL Year of construction: 2001 Type of control: CNC Control: Heidenhain Mill Plus Storage location: Halberstadt Country of origin: Deutschland Machine-No.: 11130000713 X-Travel: 880 mm Y-Travel: 630 mm Z-Travel: 630 mm Machine length: 3600 mm Machine width: 2700 mm Machine Height: 2500 mm Table Dimensions (Lengthxwidth): 1250 x 700 mm Table Load: 1000 kg Max. Workpiece Weight: 8 kg Tool Taper: SK 40 Tool Piece Magazine With: 32 Pcs./pcs. Spindle Speed: 18.000 RPM Rapid Traverse: 30 m / min Total connected load max.: 37 kVA Weight Of The Machine Ca.: 9 t Operating hours: 42.340 H Further information: Additional information: • Table: swivel milling head

with digital read-out: Activ make: HEIDENHAIN for axes: 3 x-travel: 500 mm y-travel: 400 mm z-travel: 400 mm horizontal milling head:: tool taper: ISO 40 vertical head:: tool taper: ISO 40 vertical movement of the milling spindle: 90 mm spindle turning speed range: 50-2500 U/min number: 18 feed stepless: 6.3-630 mm/min rapid motion -longitudinal/cross/vertical: 1.3 m/min total power requirement: 3.7/4.4 kW dimensions of the machine ca.: 1.3x2.0x2.0 m weight of the machine ca.: 1.8 t fixed working table:surface area: 800x460 mm vice: jaw width: 125 mm collet chuck: 1 number of collets: 11 boring chuck: 1 milling arbors: 7 coolant: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 300 mm y-travel: 160 mm z-travel: 340 mm spindle taper: ISO 40 spindle turning speed range: 40 - 2000 U/min feeds -stepless-: 5 - 500 mm/min rapid traverse: 1200 mm/min creep feed: 4 mm/min control: Heidenhain TNC 113 total power requirement: 1,6/2 kW weight of the machine ca.: 570 kg dimensions of the machine ca.: 1,2 x 1 x 1,75 m Video available on our website.: Condition: ready for operation: Electric 380 Volt: Switch gear cabinet ( separate ): Angle table ( fixed ): 600 x 210 mm Taper: Opposite bearing for horizontal milling unit: Bellows with slats of aluminium: with active digital display Heidenhain TNC 113, for automatic retraction of preselected slide positions in absolute and incremental travel, autom. feeds stepless in x + z axis, sliding upper arm 100 mm. Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software ...

Clamping plate, clamping table, machine table, T-slot plate DECKEL Working area: 700 x 250 mm for KF12 plate thickness: 60 mm groove width: 12 / 21 mm used, tested ! Dimensions: 700 x 250 x 60 mm

Clamping plate, clamping table, machine table DECKEL Working area: 600 x 430 mm for KF12 plate thickness: 25 mm groove width: 12 / 21 mm used, tested ! Dimensions: 600 x 430 x 60 mm

x-travel: 500 mm y-travel: 400 mm z-travel: 400 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m 3-axis digital read out horizontal and vertical milling spindle quill Technische Daten / technical details: Längsweg X / X-travel longitudinal 500 mm Querweg Y / Y-travel cross 400 mm Senkrechtweg Z / Z-travel vertical 400 mm Tischgröße / table size 800x460 mm Spindelaufnahme / spindle taper SK40 Drehzahlbereich / spindle speed 50-2500 UpM /rpm Vorschubbereich / feed range 8-630 mm/min. Antriebsleistung Frässpindel / power capacity milling spindle 4,4 kW Gewicht der Maschine / weight 1500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. The data for this ad was created with ModulMWS - the software solution of LogoTec ...

x-travel: 500 mm y-travel: 400 mm z-travel: 400 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m 3-axes digital read out horizontal and vertical milling spindle quill Technische Daten / technical details: Längsweg X / X-travel longitudinal 500 mm Querweg Y / Y-travel cross 400 mm Senkrechtweg Z / Z-travel vertical 400 mm Tischgröße / table size 800x460 mm Spindelaufnahme / spindle taper SK40 Drehzahlbereich / spindle speed 50-2500 UpM /rpm Vorschubbereich / feed range 8-630 mm/min. Antriebsleistung Frässpindel / power capacity milling spindle 4,4 kW Gewicht der Maschine / weight 1500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. The data for this ad was created with ModulMWS - the software solution of LogoTec ...

max. grinding diameter: 238 - 620 mm grinding length: 190 mm workpiece length: 380 - 940 mm spindle turning speed - stepless: 2 - 12000 U/min current capacity: 380 kVA power capacity - grinding motor: 1,1 kW total power requirement: 2,2 kW weight of the machine ca.: 0,6 t Mechanic: very good: Optical condition: very good: The machine can be viewed under current.: operating key and instruction: 2189 400 V, 50 Hz, with CEE plug and cable Colour: body pastel turquoise RAL 6034 Stand blue-grey RAL 7031 Motorized height adjustment, axial grinding spindle adjustment Machine like new Accesories: Sk 40 dividing head with 24 R dividing disc Graduated disc 20 R Tightening screw M 16 69871 Spiral and relief grinding device with rack housing Counter bearing with 4 tailstock centres Center point with driver Dressing device Dressing diamond Radius grinding device SK 40 complete w ...

x-travel: 400 mm y-travel: 220 mm z-travel: 400 mm spindle taper: ISO 40 spindle turning speed range: 25 - 2500 U/min feeds -stepless-: 5 - 500 mm/min rapid traverse: 1200 mm/min creep feed: 4 mm/min control: Heidenhain TNC 113 total power requirement: 2 kW weight of the machine ca.: 1500 kg dimensions of the machine ca.: m Condition: ready for operation: Electric 380 Volt: Switch gear cabinet ( separate ): Angle table ( fixed ): 700 x 330 mm Taper: diverse Bellows with slats of aluminium: Protection cabin: bottom tray: Machinefeets: with active digital display Heidenhain TNC 113, for automatic retraction of preselected slide positions in absolute and incremental travel, autom. feeds stepless in x + z axis, sliding upper arm 100 mm. Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. grinding diameter: 238 - 620 mm grinding length: 190 mm workpiece length: 380 - 940 mm current capacity: 380 kVA power capacity - grinding motor: 1,1 kW speeds of grinding spindle: 2 - 10.000 U/min total power requirement: 2,2 kW Mechanic: very good: Optical condition: very good: Condition: general reconditioning: The machine can be viewed under current.: operating key and instruction: Machine and accessories completely overhauled with CE marking 400 V, 50 Hz, with CEE plug and cable BASICMACHINE! built of year 1988 / overhauled in 2023 Color: 2 K repainting Stand RAL 7005 mouse gray Structure and accessories RAL 7035 light gray motorized height adjustment, axial grinding spindle adjustment Complete electrical conversion includes: > Fi circuit breaker > new three-phase drive > new brake motor > new frequency regulation > new touch-safe built-in electronics > EMV screw ...

max. grinding diameter: 238 - 620 mm grinding length: 190 mm workpiece length: 380 - 940 mm spindle turning speed - stepless: 2 - 10000 U/min current capacity: 380 kVA power capacity - grinding motor: 1,1 kW total power requirement: 2,2 kW weight of the machine ca.: 0,6 t Mechanic: very good: Optical condition: very good: The machine can be viewed under current.: Please notice: We would be happy to make you a free offer. However, please understand that we only process inquiries with complete address details. 1218 400 V, 50 Hz, with CEE plug and cable Colour: light grey RAL 7035 Stand traffic grey RAL 7042 (new paint) axial grinding spindle adjustment Accessories: Machine stand and carrier plate ground Complete electrical conversion included: > new three-phase drive > new brake motor > new frequency controller > new built-in electrics touch-proof > Fi circuit breaker >  ...

x-travel: 700 mm y-travel: 400 mm z-travel: 450 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m 3-axis digital read out horizontal and vertical milling spindle quill Technische Daten / technical details: Längsweg X / X-travel longitudinal 700 mm Querweg Y / Y-travel cross 400 mm Senkrechtweg Z / Z-travel vertical 450 mm Tischgröße / table size 1000x470 mm Spindelaufnahme / spindle taper SK40 Drehzahlbereich / spindle speed 31,5-1600 UpM /rpm Vorschubbereich X und Y-Achse / feed range X and Y axis 10-500 mm/min. Vorschubbereich Z-Achse / infeed Z-axis 5-250 mm/min Antriebsleistung/ power capacity 5 kW Gewicht der Maschine / weight 2400 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. The data for this ad was cre ...

Table length: 605 mm Table width: 195 mm Longitudinal X: 300 mm Cross Y: 160 mm Vertical Z: 290 mm CNC Brand: Heidenhain HeidenHain 3 axis Digital Active Dro Spindel Sk 40 Feeds all directions X-Axis:         300mm Y-Axis:         160mm Z-Axis:         290mm Table Length:   605mm Table Width:    195mm Table load:     150 Spindle speeds: 2000Rpm Feed rate X-Axis:1200mm/min. Feed rate Y-Axis:1200mm/min. Feed rate Z-Axis:1200mm/min. Length:         970mm Width:          900mm Height:         1660mm Weight:         850kg

CNC milling machine DECKEL type FP 3 A Fabr. No. 2206 - 0325 Year of construction 1980 CNC line control GRUNDIG CNC 2101 Travel X: 490 mm, Y: 300 mm, Z: 340 mm Table size 705 x 425 mm Spindle holder SK 40 Pinol stroke 100 mm Spindle speed 25 - 2500 rpm. 21 steps Feed speed 5 - 500 mm/min. infinitely variable rapid traverse speed 1200 mm /min. Motor power Spindle drive 2 / 4 kW pole switchable Mains connection 380 Volt, 50 Hz - CNC line control GRUNDIG CNC 2101 - mechanical handwheels for all three axes - Universal swivel-tilt-turntable - Hydro-mechanical tool clamping - Coolant device in the machine foot - Control cabinet adjacent (L x W = 600 x 430 mm) Space requirement L x W x H 1800 x 1700 x 1950 mm Weight approx. 2000 kg good condition; used