We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
Model
(Manufacturer: AMADA)
used
1250 x 1250 with reposition 27 station with 3 index - Very good condition
used
offer 22499 Specifications: -.max. Working length 3100 mm - Stand passage 2600 mm -.max. Pressing force 100 t - Projection 400 mm - stroke 100 mm -.max. Installation height 370 mm - Table height approx. 960 mm - Delivery speed / rapid traverse 85 mm/s - Press speed 10 mm/s - Retraction speed 80 mm/s - Drive power 11 kW - Space requirement approx. W 3500 x H 2300 x D 1950 mm - Weight approx. 8.0 t - with: - 3 axis CNC control CYBELEC - - CNC – Backgauge 0 - 600 mm - split sharpening tool - split V matrices - Support arms
used
The machine has undergone a thorough inspection by an authorized AMADA service technician CNC laser cutting machine Amada LC3015 X1 NT 4KW with sheet metal magazine Year of construction: 2008 Type: Amada LC3015 X1 NT Laser power: 4kW Table: 3,000 x 1,500 mm Sheet metal magazine: Amada AS LUL 300X1 Cooler Ridel Donaldson Suction
used
AMADA VIPROS 358 KING punching machine was manufactured in Japan in 1999. The machine is designed for precise punching of holes in workpieces having a maximum length of 1250 mm, 3000 mm width and 50 kg weight, made of mild steel, stainless steel or aluminium. Low noise level and protection of the sheet metal surface from scratches and scrapes caused by the punching process are guaranteed by a machine brush table equipped with two hydraulic clamps to hold the workpiece during the machining process. The punching machine is able to perform up to 1200 punches per minute with a press force of 30 tonnes. The machine is equipped with a FANUC AC Servo X and Y axis drive, 58 tool stations (including four auto index stations) and a control panel with a installed FANUC Series 18-P CNC controller for full control of the punching machine operation. The AMADA VIPROS 358K punching machine has been r ...
used
220 ton x 4000mm
used
Pressbrake / Press brake AMADA HFE M2 1003 Bending length 3100mm Pressure / Druk 100 ton CNC 4 axis / CNC 4 axes Year of manuf. / Year of construction 2012.10 Condition / Condition: very good, ready for operation / very good, ready for immediate use Bending tools not included / without bending tools
used
3000 x 1500mm / 4000w / Sheet Tower Automation
used
Press force: 130T Stroke: 350 mm 4 axis Weight:8860 kg
used
3000 x 1500mm 4000w
used
The turret press AMADA EUROPE 245 was produced in 2000 (machine installation: 2001). The price of the machine includes: installation and training in the use of the machine Punching machine technical data: - CNC control: FANUC 18 i-P - working time: 35,000 h - pressure: 20 t - work table: X = 600, Y = 400 - maximum punching format without intercept and with 31 stations head: 1020 x 1290 (Y-10; Y1010 T2XX; Y-50; Y970 T3XX) - maximum size of a punched sheet with an intercept: 1020 x 2540 mm - maximum size of the sheet to be punched with the intercept + 1 revolution (optional): 1500 x 2540 mm - maximum sheet thickness on the ball table: 6 mm - maximum sheet thickness on the brush table: 3 mm - maximum allowable weight on the table: 100 kg - punching accuracy: + -0.1 mm - positioning accuracy: + -0.07 mm - number of pneumatic clamps / grips: 2 - number of axes controlled s ...
used
Press brake: Amada HFE 170-3 Year of construction / Year: 2000 CNC 8 axis: 2Y + 2X + 2Z + 2R Pressure / Pressure: 170 ton Bending length : 3000 mm Stroke / stroke max. 200mm Weight / weight: 11.6 ton
used
Punching machine AMADA Europe 258 Punching force / Punching force 20 ton Working range / working range: 1250mm x 2000mm (4000mm with one reposition. 5000mm or more is also possible with second reposition) Hydraulic-eccentric drive / Hydraulischer Antrieb Turret / Revolver; Total number of 27 stations: Auto Indexing: 2 x B (max dia 31.7mm) 1 x C (max. dia. 50.8mm) Roller table / ball table
used
Press brake AMADA HFE 220-3 Number of controlled axes / CNC controlled axis: 7 Condition good, ready to use, visit under electricity possible / Condition: good, in use, can be seen under power in Poland Pressure / Pressure: 2200 kN / 220 ton Bending length / working range: 3100 mm Distance between stands / distance between columns: 2700 mm Stroke / stroke: 200 mm Delivery speed / downwards speed: 1-100 mm/s Working speed / working speed: 1-10 mm/s Retraction speed / backwards speed: 1-100 mm/s Dimensions Machine / Machine's dimensions: 4.3 x 2.3 x 3.1 m Weight / Weight: 14 ton Machine has: new safety cards from Pilz, new tool clips, new keyboard of control, new stop finger Machine has: new safety cards by Pilz, new tool clamps, new CNC cover, new back gauge fingers
used
For sale we offer an Amada EML 3610NT punch-laser combination machine. The offered machine is used and has 4657Bh. technical data: combined laser/turret punching press EML Z-3610 NT, Y.O.M. 11/2014, 45 tool stations, laser power 4 kW, operating hours: laser/resonator hours: 4657h, control type: AMNC-F, with resonator unit Amada/Fanuc AF 4000i-C, fabrication no. L14x40295, refrigeration & refrigeration unit, flue gas and laser dust filter system Herding MP2 -) right-sided automatic plate magazine LKI AS III MP, Y.O.M. 2015, machine weight approx. 12,000 kg -) left-sided vacuum acceptance & stacking device / single sorting PR 3 300 L 2P, Y.O.M. 2013, power consumption 8.5 kW, weight approx. 4,800 kg Basic installation approx. 20 x 10 m, total H (magazine) approx. 6 m The price is only valid for the machine, without dismantling, transport and commissioning. If you have any ...
used
Servoelectric punching machine AMADA EMK 3610 NT Punching force 300 kN Working range: 2500 (up to 5000 mm) x 1525 mm AMNC F Control Max sheet thickness 4.5 mm Revolver with 58 stations: 24 x A (max diameter 12.7 mm) 24 x W (max. 31.7 mm) 4 x C (max diameter 50.8 mm) 2 x D (max. 88.9 mm) Automatic indexing: 2 x W (max diameter 31.7 mm) 2 x E (max. diameter 50.8 mm) Machine dimensions LxWxH: 5430 mm x 5120 mm x 2320 mm Machine weight 24500 kg
used
Rated force 2200 Kn Max bending length 3340 mm Table length 3220 mm Table width 180 mm Table height 960 mm Passage between press bar 450 mm Stroke 180 mm Extension 410 mm Distance between stands 2700 mm Max Print 292 Bar Number of cylinders 2 pieces Oil capacity 190 litres Engine power 15 kW Max delivery speed 100 mm/s Working speed 1 - 7.5 mm/s Stroke speed 1 - 75 mm/s Total height with NC 2990 mm Total length with NC 3750 mm Total width with NC 2200 mm and light curtain 250 mm Total weight with NC 12500 kg Amada bending system Length 3750 mm Depth 2200 mm Height 2940 mm
used
Blade length 205 mm Max cutting performance Sheet R = 42 kg / mm2 4 mm Sheet R = 70 kg / mm2 3 mm Engine power 3 kW Number of beats / minutes 50 min Table dimension 625 x 954 mm Capacity of the oil tank 25 l Weight 500 kg The setting between the blades is fully automatic. Standard: - 1 set of knives at 30 ° (mounted on the machine) - 1 stop switch - 1 general circuit breaker - 1 stop adjustable and adjustable every 15° - Fill the first oil - Manual with installation and maintenance instructions and service keys.
used
Manufacturer:AMADA Feed speed continuous 0 - 31 m/min Without grinding belt ; Without grinding belt fuehrung
used
Max. cutting diameter: 250mm.
used
Working hours machine: 19744 (17.01.2024) h Working hours laser on: 9440 (17.01.2024) h Working hours beam on: 6018 (17.01.2024) h Laser power: 6000 Watt Control: AMNC 3i Working range laser: 3070 x 1550 x 100 mm Max. steel: 25 mm Max. stainless steel: 25 mm Max. aluminium: 25 mm Max. copper: 15 mm Max. brass: 12 mm Length: 10136 mm Width: 2840 mm Height: 2432 mm Machine weight: 9500 kg
used
Working hours machine: 36101 h Max. punching force: 200 kN Working range punching: 2000 (4000) x 1270 mm Control: Fanuc 18-P Length: 6190 mm Width: 5000 mm Height: 2450 mm Machine weight: 12000 kg
used
Working hours machine: 31888 (17.01.2024) h Working hours laser on: 19090 (17.01.2024) h Working hours beam on: 6475 (17.01.2024) h Laser power: 4000 Watt Max. punching force: 300 kN Control: AMNC 3i Working range laser: 2500 x 1170 mm Working range punching: 3050 x 1525 mm Length: 7870 mm Width: 5880 mm Height: 2666 mm Electrical connected load: 85 kVA x-axis: 100 m / min y-axis: 80 m / min Weight of machine approx.: 30000 kg
used
Punching capacity: 300kN, max. sheet dimensions: 1270x3660x6,4mm, max. table load: 100kg, connected load: 35kVA, length: 3778mm, width: 4601mm, height: 2245mm, weight: 13.5t.
used
X-travel: 2520mm, y-travel: 1550mm, z-travel: 300mm, max. sheet thickness: 12mm, max. workpiece weight: 330kg, cutting speed: 0-20m/min, controls: AMNC-F, connected load: 70kVA, weight: 7.5t, operating hours: 23,600h, with Resonator Fanuc AF 2000 E (LU 2.5), laser power: 2500W, laser wavelength: 10.6μm, with adaptive optics (Active Cut), sensor cutting head HS-2003, high-pressure cutting device (Clean Cut), aluminium cutting device (Alu Cut), focus point adjustment, gas pressure adjustment, resetting device, parts flap, extraction system, cooling unit, beam path rinsing and diode laser for positioning.
used
X-axis: 2520mm, y-axis: 1550mm, z-axis: 300mm, max. sheet thickness: 12mm, control FANUC 160i-L, FANUC Laser C4000, Keller dry separator Vario T 1.5, cooling Riedel. The machine is fully functional and can be inspected on site during operation.
used
Description: Serial Number: 097 Working details: , Working Area: , X: 3070 , Y: 1550 mm , Axis displacement ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  , X: 3420 , Y: 1550 , Z: 200 Cutting speed: X,Y: from 0 to 20 mt/min , Max. weight on the table: 840 kg , Assist gas control: Automatic , Max. working height: 840 mm , Weight of machine: Approx. 12.000 kg (excl. dust collector, cooler and changeoderver) , Power requirement: AC 200/220V ±10% 50/60Hz 27 Kva (excl. dust collector, cooler and pallet changer) , Laser  , Model: AF 4000 i-B Maximum Power 4,000w Frequency: 5 to 2000hz Laser Type: Co2 Circular Polarisation , Laser gas consumption Approx. 10 lit./min. Cooling water flow 160 lit./min. Power requirement AC 200/220V ± ...
used
Description:  , , ,Serial Number: 32510005 Technical Data Laser: Co2 laser Control: FANUC AF2000C Power: 2kw Technical data Punching machine: Working dimensions:  , 1500 x 2500 mm without repositioning , 1500 x 5000 mm with 1 repositioning. Force: 196 KN Power: 53kva Max. material weight: 280 kg Max. material thickness: , 6,4 ,mm Tool stations: 31 (tooling not included) Max. tool diameter: 88,9 mm Tool change time: 1,5 sec. Automatization ,system Included  , Serial Number: 835 Model: PR UL 300  , ,AP , YOM: 2004 Capacity: 3000kg Power: 5,5kw Stacking Area. 3 400 x 1 400 mm CE standard Note: Machine was dismantled by AMADA and now , is stored laser capacity: 2 kW, control: FANUC AF2000C, total power requirement: 53 kW, weight approx.: 20,000 kg, Approx. Onsite Dimension. (l x w x h): 8,320 x 4,203 x 2,773 ...
used
Description: Machine Specifications: Max. Sheet Dimensions: 5040 x 1550 mm Max. Sheet Weight: 330 kg Max. Slide Stroke (X): 2520 mm Max. Stroke of Laser Head (Y-Axis): 1550 mm Max. Stroke of Laser Head (Z-Axis): 300 mm Max. Cutting Speed X and Y Axis: 20 m/min. Speed Rapid Transport X: 80 m/min. Speed Rapid Transport Y: 80 m/min. Speed Rapid Transport Z: 60 m/min. Positioning Accuracy: ± 0.01 mm/500 mm Repeatability: ± 0.005 mm Table Height: 820 mm Part Door Dimensions: 550 x 1550 mm Power Supply Voltage: 200 V (± 10 %) AC Mains Frequency: 50/60 Hz (± 1 Hz) Installed Power: 10 kVA, 3 phases Compressed Air Supply (Cutting Gas): 1000 l/min. Compressed Air Supply (No Cutting Gas): 250 l/min. Dimensions (LxWxH): 2500 x 5654 x 2275 mm Type ,Numerical Control: FANUC FS-160iLA Controlled Axes:  ,X, Y, Z (3 axes controlled simultaneously) Programming Metho ...
used
Production date: December 2011 Hours of operation: 67000 Current condition: very good, used in production For the past 3 years, it has worked in 2 shifts on sheets from 0.5mm to 2mm Tonnage: 20 metric Press controller system: servo-driven (not hydraulic) Maximum thickness: 3.2mm or 6mm with dense brush or ball table Travel range (without repositioning): 1270 mm x 2500 mm Maximum feed speed: - X axis: 80 m per min - Y axis: 60 m per min Maximum material weight: - 50 kg (F1 speed) - 150 kg (speed F4) Maximum number of strokes: 900 strokes per minute Punching accuracy: ± 0.1 mm Turret rotation speed: 30 rpm Automatic indexing speed: 60 rpm Turret stations: 45 stations (including 4 auto-index) NC control: AMNC / PC Power requirement: 19 kVA Maximum air consumption: 750 Nl Machine weight: 13 tons Included: - Amada AE2510NT punching machine - Isolation transformer a ...
used
Description: serial number: V000620 working hours: approx. 14842 ,hrs.  , max.pressing ,force: 1000 kN bending length: 3000 mm max. stroke: 200 mm voltage: 400 V / 50 Hz power: 9 kW nominal current: 19,9 A number of phases: 3  , fixed collection period: 24.06. - 28.06.2024 serial number: V000620, Read off working hours: 14,808 h, Max. pressing force: 100 to, bending length: 3,000 mm, stroke: 200 mm, total power requirement: 9 kW, weight approx.: 6,750 kg, Approx. Onsite Dimension. (l x w x h): 4,615 x 2,660 x 2,700 mm