used Window installations for sale

Number of spindles: 3 St.Number of tools: 2/3 St.Spindle diameter: 40/50 mm1 OKOMA folding machine model UF 2 EG-------------------------------------1. Energy data:- Operating voltage: 3 phases, 380 V, 50 Hz.- Compressed air: Air requirement: 13 NL/min. Operating pressure: 8 bar up. Air: according to Pneurop 66112. Profile spindle 1:- Spindle arrangement: right- Power 11 kW- Speed 7000 rpm- Direction of rotation: synchronous and counter rotation- Spindle diameter 40 mm- Usable length 252 mm- Tool diameter max. 230 mm- U-movement of the profile spindle- Positioning vertically Drive: pneumatic cylinder 120 mm cycle for 2 tool positions Position sensor: limit switch- Positioning horizontally Drive: Pneumatic cylinder forward-back Position sensor: limit switch- Automatic immersion: immersion speed can be regulated for tear-free Fold over- ...

Description: for the production of plastic windows and doors only saw, without measuring device  , please also have a look at the video of this machine Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 1,100 mm, weight approx.: 145 kg

Description: Material brass and stainless steel, including transport trolleyApprox. Onsite Dimension. (l x w x h): 5,100 x 400 x 800 mm, weight approx.: 200 kg

Description: Material steel, including transport trolleyApprox. Onsite Dimension. (l x w x h): 3,100 x 600 x 850 mm, weight approx.: 380 kg

Description: Material steel and aluminum, including transport trolleyApprox. Onsite Dimension. (l x w x h): 3,200 x 400 x 800 mm, weight approx.: 350 kg

Description: Mostly made of steelApprox. Onsite Dimension. (l x w x h): 5,000 x 600 x 5,000 mm, weight approx.: 500 kg

Description: Material steel, including transport trolleyApprox. Onsite Dimension. (l x w x h): 6,000 x 600 x 850 mm, weight approx.: 2,500 kg

Description: Material steel, including transport trolleyApprox. Onsite Dimension. (l x w x h): 3,000 x 500 x 700 mm, weight approx.: 400 kg

Description: Material steelApprox. Onsite Dimension. (l x w x h): 1,600 x 1,200 x 500 mm, weight approx.: 300 kg

Description: Material steel and POMApprox. Onsite Dimension. (l x w x h): 1,600 x 1,200 x 500 mm, weight approx.: 500 kg

Approx. Onsite Dimension. (l x w x h): 300 x 200 x 200 mm, weight approx.: 10 kg

Description: Lot consisting of: , Cast iron T-piece DN 200/100 , T-piece Cast iron DN 150/80  ,Ball check valve DN 100 (x22) , Suction cup valve ARI DN 50, PN16, ,4 pieces Various valves and water meters , Various steel pipe fittings Approx. Onsite Dimension. (l x w x h): 1,200 x 1,200 x 1,000 mm, weight approx.: 1,600 kg

Description: This machine is suitable for both standard windows and for special production, such as triangular and trapezoid windows. benefits: weld seam restriction 2 mm angle adjustment from 30° to 180° individual adjustment of welding  , parameters: parallel thrust procedure short retooling times  , max profile width: , 112 mm after angle 45 whipped after angle 60 whipped 133 mm 90 bevelled 167 mm 180 beaten 190 mm min height 30 mm maximum profile height 130 mm radial pressure: 7 bar  , please also have a look at the video of this machine Approx. Onsite Dimension. (l x w x h): 700 x 700 x 1,550 mm, weight approx.: 205 kg

Description: machine for drilling hinges into frames of pvc windows and balcony doors Uban ESB 210 now set up for Sigenia all-round fittings  , please also have a look at the video and the PDF document of this machine Approx. Onsite Dimension. (l x w x h): 3,030 x 3,000 x 1,800 mm, weight approx.: 350 kg

Description: for the production of plastic windows and doors includes screwdriving and drilling unit + scissors for fittings  , please also have a look at the videos and PDF documents of this item Approx. Onsite Dimension. (l x w x h): 3,300 x 1,800 x 1,000 mm, weight approx.: 1,050 kg

Description: for production of plastic windows and doors  , please also have a look at the video and the PDF document of this machine Approx. Onsite Dimension. (l x w x h): 3,550 x 1,000 x 2,650 mm, weight approx.: 500 kg

Description: Weinig window production line Unicontrol 10 for the production of individual parts and elements in frame-by-frame and series production The window tools are not included in the delivery  , screen control, inclined window device , laser directional light for cut-to-length saw for section detection length stop CNC-controlled mounted on the slotting table for timber lengths up to 3500 mm ,  , , ,studio window device: 60° swivelling cross-cut fence with PC display and pneumatic clamp sliding counter bar special pressure for inclined parts production ,  ,crossbar guide consisting of: automatically timed guide bar in the fence for muntin production crosscut saw: motor power: 3 kW spindle diameter: 40 mm spindle speed: 3000 ,rpm tool flight circle max: 350 mm axial adjustment: NC-axis integrated in control unit , ,  , 1. te ...

Tenoning spindle: 2 St.Number of milling agregates: 7 St.Spindle diameter: 50 mmcontrol: Weinig, PC-Nexus Weinig Unicontrol 12with radial and axial CNC spindles as well as VARIO table and milling carriage Machine can be seen in use for a short time!Technical data summary(please inquire about any additional accessories included) crosscut saw > Electronic crosscut saw, horizontally infinitely adjustable> Number of tools: 1 piece.> Spindle speed: 2,800 rpm> Spindle diameter: 40 mm> Tool diameter max.: 400 mm> Motor power: 3.7 kW> Laser directional light to detect the saw section> Axial adjustment path 150 mm NC axis, electronically infinitely variable> Radial pneumatic adjustment path 8 positions for e.g. edge rounding from aboveRounding aggregate > Position: horizontally below> Motor power: 1.5 kW> Spindle diameter: 20 mm> Tool clamping length: 25 mm> Spindle speed: 9,000 rpm> Tool diamete ...

Tenoning spindle: 2 St.Number of milling agregates: 7 St.Spindle diameter: 50 mmControl: CNC, Weinig PC-Nexus Weinig Uncontrol 12with radial and axial CNC spindles and VARIO table.. The machine has already been professionally dismantled and stored in 73447 OberkochenSpecifications summary(please inquire about any additional accessories included).. crosscut saw.. > Crosscut saw electronically, horizontally infinitely adjustable> Number of tools: 1 pc.> Spindle speed: 3000-6000 rpm> Spindle diameter: 40 mm> Tool diameter max.: 400 mm> Motor power: 3.7 kW> Laser guide light for detecting the sawing section> Axial adjustment path 150 mm NC axis, electronically stepless> Adjustment path, radial, pneumatic, 8 positions, e.g. for edge rounding from aboverounding aggregate.. > Position: horizontally below> Axial adjustment path together with the crosscut saw.electronic length stop.. > Length 450 ...

Tenoning spindle: 1 St.Number of milling agregates: 4 St.Spindle diameter: 50 mmcontrol: Südtron BT 20 Weinig Unicontrol 6---------------------------------General data---------------------------------Loading dimensions approx. 5000x2400x2400Machine weight approx. 3000 kgcrosscut saw---------------------------------> Pneumatic crosscut saw, against 8-fold turret stop> Spindle speed: 2800> Spindle diameter: 40 mm> Tool diameter max.: 350 mm> Motor power: 3 kW> Laser directional light to detect the saw sectionLength stop - clocked---------------------------------> Length stop 2700 mm1. Tap and slot spindle---------------------------------> Number of tools: 3/4 pieces.> Tool clamping length: 320 mm> Vertical pneumatic spindle stroke: 240 mm for wood thicknesses IV 68-92> Spindle speed: 3500 rpm> Spindle diameter: 50 mm> Tool diameter max.: 320 mm> Motor power: 11 kW1. Profiling spindle - sy ...

Tenoning spindle: 1 St.Number of milling agregates: 4 St.Spindle diameter: 50 mmControl: Weinig, PC-Nexus #2654 Weinig Unicontrol 6 with NC spindles----------------------------Specifications summary(please inquire about any additional accessories included)Pos. 1: Crosscut saw----------------------------> Crosscut saw electronically, horizontally infinitely adjustable> Number of tools: 1 pc.> Spindle speed: 2,800 rpm> Spindle diameter: 40 mm> Tool diameter max.: 400 mm> Motor power: 3.0 kW> Laser guide light for detecting the sawing sectionelectronic length stop, mounted on slotted table includedPositioning of the cross-cut saw integrated in the control.> Length 3500mmPos. 2: tenoning spindle----------------------------> Number of tools: variable, infinitely variable NC axis adjustment> Tool clamping length: 320 mm> Vertical spindle stroke: variable, stepless adjustment 254 mm NC axis> Sp ...

Tenoning spindle: 1 Stk.Number of milling agregates: 4 St.Spindle diameter: 50 mmControl: Weinig, PC-Nexus # 6826 Weinig Unicontrol 6 with NC spindles------------------------------------------------Machine can still be seen in use!Technical data summary(please inquire about any additional accessories included)Pos. 1: Crosscut saw------------------------------------------------> Number of tools: 1 piece.> Spindle speed: 3,000 - 6,000 rpm> Spindle diameter: 40 mm> Tool diameter max.: 400 mm> Motor power: 3.7 kW> Adjustment path radially pneumatically controlled to 8 positions, e.g. for edge rounding from above> Laser directional light to detect the saw sectionPos. 2: Rounding unit horizontally at the bottom------------------------------------------------> Position: horizontally below> Motor power: 1.5 kW> Spindle diameter: 20 mm> Clamping length 25 mm> Spindle speed: 9000 rpm> Tool flig ...

Tenoning spindle: 1 St.Number of milling agregates: 4 St.Spindle diameter: 50 mmWeinig Unicontrol 6 with NC spindles-----------------------------------Technical data summary(please inquire about any additional accessories included)...Generally-----------------------------------> Loading dimensions: 7000 x 2400 x 2400 mm> Machine weight, approx.: 3700 kgcrosscut saw-----------------------------------> Electronic crosscut saw, horizontally infinitely adjustable> Number of tools: 1 piece.> Spindle speed: 2800 rpm> Spindle diameter: 40 mm> Tool diameter max.: 400 mm> Motor power: 3 kW> Laser directional light to detect the saw sectionElectronically safe length stop-----------------------------------> Length 3600 mm1. Tap and slot spindle----------------------------------> Number of tools: 3/4 pieces.> Tool clamping length: 320 mm> Spindle stroke vertical adjustment continuously> Spindle spee ...

Tenoning spindle: 1 0Number of milling agregates: 5 St.Spindle diameter: 50 mmcontrol: Weinig, PC-Nexus # 2732 Weinig Unicontrol 6 with NC spindles------------------------------------------------Machine is in checking process at the moment!Technical data summary(please inquire about any additional accessories included)Pos. 1: Crosscut saw------------------------------------------------> Number of tools: 1 piece.> Spindle speed: 2,800 rpm> Spindle diameter: 40 mm> Tool diameter max.: 400 mm> Motor power: 3 kW> Adjustment path radially pneumatically controlled to 8 positions, e.g. for edge rounding from above> Laser directional light to detect the saw sectionPos. 2: Rounding unit horizontally at the bottom------------------------------------------------> Position: horizontally below> Motor power: 1.5 kW> Spindle diameter: 20 mm> Clamping length 25 mm> Spindle speed: 9000 rpm> Tool fligh ...

Number of spindles: 4 St.Number of tools: 11 St.Spindle diameter: 50,40 mmSpindle length: 285,125 mmlength: 4000 mmwidth: 2000 mmheight: 2200 mmWeinig Univar 10/3 folding machine---------------------------------Machine will be cleaned and chcked before deliveryFor milling around windows, doors and the like with unevencircumferential profiles. Machine suitable for wood thickness 68 to 92 mmTime required per frame milling, medium size 1.20 x 1.20 m - approx. 2 minutes.The available tool positions are selected using a selector switch on the control panelretrieved.Machine with 3 hydraulically controlled right precisionLifting spindles for holding 3 tool sets, 2 x 95 mm spindle stroke per spindleThe spindle stroke takes place in a U-movement, so that the opening is possible for short partsThe milling stop remains as small as possible. Spindle stroke horizontally fineAdjustable for both tool p ...

Number of boring spindles: 3 St.Number of tools: 1.3/4.1. St.Spindle diameter: 50,40 mmSpindle length: 120,320,125 mmweight: 2500 kgloading dimensions L x W x H: 3800x1400x2000 mmtable length: 3470 mmWeinig Univar 6 PIn order to sell----------------------Operating voltage: 380 volts, 50 periods.For milling around windows, doors and similar with uneven edgesProfiles.Arrangement of the aggregates:1. Synchronous spindle on the right, pneumatically clocked.2. Profiling spindle on the right3. Fitting spindleProfiling spindle suitable for holding several tools one on top of the other.Spindle movement pneumatic.The 1 spindle works in synchronization for tear-free milling. RespectivelyThis spindle plunges the last 100 mm of a frame end with theInsert the appropriate tool into the wood to prevent tearing at the frame cornersavoid.Machine stands, tables, stops:Machine body made of heavy, torsion-f ...

Tenoning spindle: 1 0Number of milling agregates: 3 St.Spindle diameter: 50 mmWeinig Unicontrol 10-5, built in 1993Slotted spindle 6 x 100 mm2 profile spindles length 320 mm, stroke 95 mmFitting spindlewith folding devicewith return and discharge deviceWeinig Univar 10 with olive drilling rig, built in 19903 spindles each 320 mm long, stroke 95 mm+ Fitting milling deviceGötzinger SFM, built in 2011--------------------------------Milling machine for the locking parts in the framewith 4 mm clearance+ Drilling corner bearingIncludes tools for Weinig Unicontrol:Zuani Tools IV 68/78/90 wood, 68/78 aluminum4 mm clearance--------------------------------For sale on behalf of the customer ex locationMachines are currently still in use--------------------------------(Technical information according to the manufacturer - no guarantee!)The data for this ad was created with ModulMWS - the software s ...