INDEX used machine for sale

7 pcs. Index VD30 mounts with Capto interface, 3 pcs. powered by it, mint condition!

Type tandem with 2 workrooms Control: SIEMENS Sinumerik max. turning Ø: 200 mm Travels: X= 520, Z= 200 mm Revolver with 14 stations Conveyor

INDEX GSC 65 CNC Lathe YOM 1997, installed 1998 Turning diameter in chuck 250 mm Swing Ø above bed, max. 300 mm Turning length 400 mm Control: Index C 200-8 (Sinumerik 880) Axes X/Z/C Travel of Slides: Turret 1- X / Z travel 163 / 550 mm Turret 2- X / Z travel140 / 250 Spindle bore, approx. 65 mm Tool holder bore 30 mm Spindle speeds 25 - 5000 rpm Feed range 0 - 15000 rpm Spindle drive 0.5 - 40 kW Total electrical load 60 kW - 380 V - 50 Hz Weight, approx. 8,500 kg Accessories & Spare parts -SIEMENS CNC Continuous Path Control, Model 880 (INDEX C 200-8). Changed monitor. -Hydraulic high-power chuck ROHM HS 200/3 -Tailstock -Turrets: 3 -Rotation tools in Turret 1- 2, in Turret 2- 3. -Milling spindle- tool in Turret 2 -Tool stations: 8 / 12 / 8 + 28 tools in magazine -Coolant device with chip conveyor. -A lot of spares and accessories

- Control: Sinumerik (Index C200-4D) - Rod passage 65 mm - Speed 5000 1/min - Turret 1 with 8 stations (all driven), incl. synchronous spindle - Turret 2 with 6 stations (all driven) - Revolver 1/2 travel: X1= 90, Z1= 290 mm X2= 81, Z2= 80 mm - Back processing 5 Rear Drilling Stations - C axis -Conveyor Machine weight approx. 3000 kg Footprint including control cabinet and chip conveyor: LxWxH: 3430 x 1240 x 1750 mm Loading magazine: INDEX MBL Weight: approx. 2,000 kg Dimensions LxWxH: 4500x1100x1500 mm

turning diameter 620 mm turning length 1500 mm control Siemens 808D spindle bore 100 mm turning diameter over slide 420 mm spindle turning speed range 10 - 4000 U/min main drive 41 kW rapid traverse speed 10000 mm/min total power requirement 65 kW weight of the machine ca. 9 t dimensions of the machine ca. 6,4 x 3,0 x 2,5 m Control unit CNC Siemens 808D new Drives/Servomotores, 24 month warranty on equipment - Chip Conveyor - Tool cooling system - Tailstock - Tool changer (Tower) with 8 positions OPTIONAL INCLUDED - - piece support (Lunete) The machine is completely upgraded

Index GFG 450, Built in 1996, Control Index C 200 - 4, Travel X/Z 430/545 mm, Circulation Ø over bed carriage max. 425 mm, Bar passage 100 mm, 2 revolvers 8-speed / 6-speed, turret 1 powered tools, Recording VDI 50 , C axis 0.001°, Conveyor 4-stage transmission up to 2,250 rpm, Three-jaw chuck 315-82, Full-clamping cylinder OVS 150, Accessories

Automatic ring lathe from Keul - Rotary Ø: 1.0 - 8.0 mm - Gripping and swivel device - Part discharge position 1 - Machining unit position 1 - Roll straightening unit -Conveyor - Reel Ø 1200 mm, 1,000 kg

Index G200 bar lathe :::SPECIFICATIONS::: CNC Model: Siemens CNC version: Index C 200 - 4 Main spindle nose: ASA 6 Main spindle bar clearance: 60mm Turning diameter: 150mm Turning length: 400mm Main spindle revolutions: 5000 Number of Tool Turrets: 1 Number of tool places before turret: 14 Number of motorized first turret: 14 First turret tool attachment type: VDI 25 X axis travel first turret: 155mm Y axis travel first turret: +-60mm Z axis travel first turret: 400mm Model and brand bar magazine: LNS Hydrobar L 3000 mm Tailstock: yes Positioning: automatic Chip evacuator: carpet Other technical data: The tailstock has a programmable axis Machine equipment: Rich equipment: Motorized and fixed tool holder sets Hainbuch pliers Self-centering forkardt :::D IMENSIONS AND WEIGHT::: Weight: 4800Kg

Used multi-spindle machine INDEX MS36E built in 1996 including a lot of accessories (collets, synchronizer guns, interchangeable wheels, various working curves, etc.) The plant is virtually ready for dispatch, in a dismantled state for inspection. For photos, technical data and a list of accessories, see Appendices. It has no major defects, is basically ready for operation, only the rubber hoses should be changed before commissioning and the coolant-lubricant system should be thoroughly cleaned and rinsed throughout. Accessory listing MS36E Iemca Loading Magazine Oil filter system (+3 rolls of filter paper) Collets Synchronizer Clamps (sentences) Ø 24 Ø 16 Ø 26 Ø 20 Ø 27 2x Ø 23 Ø 28 2x Ø 26 Ø 30,5 2x Ø 27,5 Ø 31 Ø 32 div. jaws Ø 33 for 3-jaw chuck Ø 34 Ø 36 SW 24 1x spindle stop (currently layer 4) 3 sets of rod guide tubes Various reductions f ...

Tool holder collet fixed for index G300 (VDI30) Condition: Used Set consisting of: 14 pieces of drill rod holder 24 pieces of turning steel brackets 2 pieces of detour

Tool holder fixed for Index G300 (VDI30) Condition: Used Set consisting of: 14 pieces of drill rod holder 24 pieces of turning steel brackets 2 pieces of detour

Tool holder driven for index G300 (VDI30) Condition: Used Set consisting of: 10 pieces of straight tool holders (1 piece more as seen in the picture) 14 pcs angle tool holder

Inv. Num. : 6160 Type: GE 42 NC Producer: INDEX Generated: Parameters: Control system: Siemens Maximum turning length: 360 mm turning diameter: 300 mm Minimum spindle speed: 31.5 1/min Maximum spindle speed: 6000 1/min Total power requirement: 35 kW Equipment: Bar loader

Machine Details Warehouse number 1105-03632 Machine type CNC turning and milling center Make INDEX Type G 200 Year of construction 1997 Control type CNC Controller C200- Siemens 840 C Storage location FRANCE Country of origin Germany Delivery time immediately Freight base from location Technical details Turning diameter 200 mm Turning length 400 mm Controller C200- Siemens 840 C Circulation diameter 420 mm Rod diameter 65 mm Chuck diameter 165 mm Speed range - spindle ~ 6,000 rpm Drive power - Spindle motor 100% ED= 7.5/13/20 kW Drive power - Spindle motor 40% ED= 13.3/22/29 kW Rod diameter 65 mm Spindle bearing diameter 100 mm Chuck diameter 165 mm Speed range - spindle ~ 6,000 rpm Drive power - spindle motor 100% ED= 7.5/13 kW Drive power - Spindle motor 40% ED= 13.3/22 kW C - axis 0.001 ° Number of revolvers 2. Turret head (x-fold) 2 x 14 pos Travel - x ...

Control: Fanuc 32i Rotary memeser 380 mm Main spindle D=65mm Speed 4000 rpm Holding brake C-axis Tool carrier 1 X/ Z axis 220/ 600 mm working distance Tool carrier 1: 14 shots (VDI 30)/ 7 attached Tools Tool carrier 2 X/Z axis 110/650 mm working distance Tool carrier 2: 7 shots (VDI 30) + 3 UniFlex -52 Tool measurement ATC Chip-federals

Index HE 25 with rod feed hydraulically controlled with long turning device

Curve lathe INDEX B60 - not complete - as spare part dispenser - see pictures

see picture

Curve lathe INDEX ER60 - see pictures More: turnover machine MANURHIN Traminer TR22B

see pictures

various INDEX tool holders according to the list

Including chip conveyor.

There are three identical machines available, two machine have a Bar Loader SAMECA MONOSAM 65 each, including documentation, various accessories and spare parts, were maintained regularly.

Length: 2700mm, width: 1900mm, height: 1900mm, weight: 2.5t, with Bar Loader FMB Turbo 8-80/320/A, year of construction: 2007, Chip Conveyor Knoll, documentation and Extraction Sartorius, was maintained regularly.

X-travel: 520mm, z-travel: 200mm, circumferential diameter: 325mm, spindle bore: 60mm, rapid traverse: 30m/min, number of tool positions: 25, control: Index C200-4, including three-jaw chuck, pallet circulation system, coolant tank, scraper belt conveyor, tool holder and documentation, on-site inspection is possible.

X-travel: 310mm, z-travel: 870mm, resolution C-travel: 0.001°, turning diameter: 250mm, main spindle speed: 20-4000/min, max. swing: 540mm, number of tool positions: 16, max. chuck diameter: 315mm, turning length: 820mm, work spindle passage: 65mm, control: Siemens Sinumerik 840C, length: 4100mm, width: 2000mm, height: 2200mm, weight: 5.5t, operating hours unknown, with driven tools, chip conveyor, control cabinet, frame, cooling lubricant system and documentation, has been regularly maintained, inspection is possible.

Spindle diameter: 30mm, rotationalspeed: 7500rpm, with chip conveyor and base holder. Control: Siemens Sinumerik 840 C, length: 3210mm, width: 2084mm, height: 2214mm, weight: 3.2t. Line pressure: 210bar, injection force: 182kN, clamping force: 1000kN, opening stroke: 0-400mm, mold installation height: 450-750mm. An on-site inspection is possible.

Controls: Siemens C200-4 D, has been regularly serviced, with documentation and accessories, the machine can be inspected on site.

Max. turning diameter: 200mm, max. turning length: 400mm, spindle speed: 6000rpm, bar capacity: 42mm, weight: approx. 4300kg.

Max. speed range: 5000 rpm, bar capacity: 65 mm, max. turning diameter: 200 mm, max. turning length: 400 mm. Number of spindles: 2, tool changer: 2x 14, Siemens control. Including outfeed conveyor, KNOLL 400S-1 chip conveyor (year of manufacture: 2016), switch cabinet with cooling unit, CO2 extinguishing system and INDEX bar loader. General overhaul in 2016.