We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
: 40-1080 tool taper: MK 5 weight of the machine ca.: 2 tfeed: . The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Description: Serial number 18067 Includes 2nd clamping table approx. 400 x 380 mmturning speed range: 30 bis 3000 rpm, table surface area l x w : 500x370 mm, weight approx.: 600 kg, Approx. Onsite Dimension. (l x w x h): 900 x 750 x 1,900 mm
used
bore capacity in steel (diameter): 35 mmthroat: 330 mmbore stroke: 165 mmspindle taper: MK4 turning speed range - stepless: 130-480/480-1750 U/mintable width: 742 mmtable depth: 594 mmtotal power requirement: 2,2 kWweight of the machine ca.: 700 tFeed with electromagnetic feed clutch0.1/0,2/0,3right- and left rotationCooling unit not available Table and Drilling Head height adjustableheight adjustment of upper drilling unit: 200 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Bohrleistung in Stahl (-Ø: 36 mmthroat: 350 mmbore stroke: 180 mmBohrleistung in Guß (-Ø: 45 mmspindle taper: MT: 4 spindle head adjustment: Ý 500 mmtable surface area: 600 x 700 mmfloor plate:: 460 distance work spindle /surface of the table: 80 - 750 mmspindle turning speed range: 0,09 - 0,28 U/minfeeds: 380 mm/WUvoltage: 50 Vpower capacity: 2,5 kWweight of the machine ca.: 0,7 tdimensions of the machine ca.: 0,6 x 1,1 x 2,1 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
: ja feed: 80 - 800 m/min: 1848 weight of the machine ca.: 2,2 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Description: Speed range: 130 - 1750 rpm Table dimensions: approx. 500 x 370 mmtool taper: MK3, weight approx.: 1,200 kg, Approx. Onsite Dimension. (l x w x h): 900 x 630 x 1,900 mm
used
Description: Machine number: 627/3 Speed: 55 - 1450 rpm Table dimensions: 620 x 460 mm With vice Jaw width: 110 mm Drilling depth: up to 180 mmweight approx.: 300 kg, Approx. Onsite Dimension. (l x w x h): 1,100 x 700 x 1,900 mm
used
- mounting table: 300 x 400 mm - quill ram: 120 mm - speed range: 5800 rpm - gearbox stages: 2 - feed: 0,001 - 3,5 m/min - rapid: 3,5 m/min - taper fixture: MK 3 - thread cutting device with foot switch - coolant system - total power: 1,5 kW - weight of machine: 380 kg - space requirement (W x D x H): 0,66 x 0,44 x 1,95 m - condition: very good Details High-performance drilling machine, machine number 511 accessories documentation, coolant equipment
used
Box column drill Alzstar 40S 16 A 380 V Speed 160 - 2250 rpm Length 1 m Width 0.80 m Height 1.80 m Weight 270 kg Work lamp Color: White
used
Column drill Alzmetall
used
weight approx.: 450 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 2,000 mm
used
Description: Serial number : tc19 Model : AY-25-TC Power : 750 w Voltage : 230 v Manufacture year ,: 2017 R.P.M : 1400 Boring stroke : 80 mm The drill has a stroke on the top and the bottom (see photos 7 and 10 )boring stroke: 80 mm, weight approx.: 100 kg, Approx. Onsite Dimension. (l x w x h): 600 x 500 x 1,600 mm
used
Description: Machine number: 10930 Table dimensions: 300 x 250 mm With 2 groovesweight approx.: 300 kg, Approx. Onsite Dimension. (l x w x h): 800 x 500 x 1,900 mm
used
weight approx.: 2,000 kg, Approx. Onsite Dimension. (l x w x h): 1,000 x 600 x 2,000 mm
used
Bluthardt, VRB 6/20 Drill with coordinate table, with digital display DRO , Year of construction: 1980, very good condition, to be visited under electricity Adapter SK40, quick-change system, incl. mounts MK2, MK3, MK4 , Spindle : 45 - 900 rpm , 3,4KW, clockwise - counterclockwise, Stroke: 200mm, upper part adjustment electr. 500mm Projection : 500, Coordinate table: clamping area 600x400m, X-660, Y-450mm
new
Code 99901 Description Pillar drill Make CABER Modell 58 R Serial No. Year New Table ( turnable ) 400 x 600 mm Base 540 x 640 mm Drilling capacity ( Steel 60 ) 40 mm Spindle quill 200 mm Spindle taper 4 MC Gap 400 mm Max. distance spindle – table 800 mm Max. distance spindle – base 1180 mm Spindle speeds 9 steps 90 - 1550 rpm Spindle feeds 4 steps 0,06 – 0,30 mm/rev Weight 500 kg Motor 3 kW – 380 Volt Accessoiries automatic spindle feeds Coolant Condition Unused
new
Code 99902 Description Pillar drill Make CABER Modell 59 R Serial No. Year New Table ( turnable ) 400 x 600 mm Base 540 x 640 mm Drilling capacity ( Steel 60 ) 50 mm Spindle quill 200 mm Spindle taper 5 MC Gap 400 mm Max. distance spindle – table 800 mm Max. distance spindle – base 1180 mm Spindle speeds 9 steps 65 - 1150 rpm Spindle feeds 4 steps 0,06 – 0,30 mm/rev Weight 500 kg Motor 3 kW – 380 Volt Accessoiries automatic spindle feeds Coolant Condition Unused
used
Description: Drilling capacity 13 mm Spindle taper B16 or CM2 5 Speeds 500-4500 rpm Collection on: 29/04/2024 or 30/04/2024 afternoon or 06/05/2024  ,  ,Collection times by arrangement  , IMPORTANT: Collection times may vary if separate collection times are explicitly stated in  ,in the item descriptionweight approx.: 80 kg, Approx. Onsite Dimension. (l x w x h): 450 x 630 x 1,450 mm
used
bore capacity in steel (diameter): 6-40 mmtable-size: 560 x 450 mm mmthroat: 330 mmturning speed range - stepless: 60-1800 U/minbore stroke: 1780 mmtotal power requirement: 3 kWweight: 1,1 tdimensions of the machine ca.: 1,2x0,8x2,5 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
: gebraucht : 2021 : 3974 : prompt, Zwischenverkauf v : Spanien : 5100 €: 1 : 1 : 32 mm: MK 3 : 250 mm: 65 - 125 - 185 - 365 - 54 U/min: 1,8/2,6 kW: M24 : 600 mm: 640 mm: 2020 mm: 260 kg: 100 mm: 85 - 635 mm: 1.170 mm: 300 x 270 mm: 600 x 380 mm: 120 mmdemo machineERLO (MADE IN SPAIN)FOR DEMANDING WORKSHOP USEgeardrive machinemanual feedleft-right drillingtable with t-slotsdepth adustable endtool ejectordrill guardCE normsuser manual in GERMAN(sample photo)OPTIONS:lighting equipment€ 231,--coolant equipment and machine base with T-slots€ 825,--reverse for tapping€ 737,--DELIVERY TIME WITH OPTIONS APPROX. 6 WEEKS.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Description: Drill-Threader with multiple boring head Serial Number 1933/1371 Thread capacity M18 Automatic threading by master spindle OMG 4-station multi-spindle head mod VH 104 1500 - 3000 r.p.m.weight approx.: 500 kg, Approx. Onsite Dimension. (l x w x h): 500 x 1,100 x 2,500 mm
used
Description: Column drill Serial number 215/210 Table dimensions: 370 x 450 mm Vertical spindle travel: 200 mm 8 working speeds: 93-1420 Rpm Motor power 1.1 kW Lot 20table surface area l x w : 370x450 mm, weight approx.: 350 kg, Approx. Onsite Dimension. (l x w x h): 700 x 1,000 x 2,300 mm
used
Description: Column drill Table dimensions: 600 x 620 mm Vertical spindle travel: 200 mm 9 working speeds: 77-1280 Rpm Motor power 1.1 kW Reconverted to work with water Water pump included Lot 11table surface area l x w : 600x620 mm, weight approx.: 650 kg, Approx. Onsite Dimension. (l x w x h): 650 x 1,100 x 2,250 mm
used
Description: Column drill Table dimensions: 400 x 320 mm Spindle vertical travel: 200 mm 9 working speeds: 77-1280 Rpm Rotary table Vice includedtable surface area l x w : 400x320 mm, weight approx.: 450 kg, Approx. Onsite Dimension. (l x w x h): 650 x 1,000 x 2,250 mm
used
table surface area l x w : 260x200 mm, weight approx.: 400 kg, Approx. Onsite Dimension. (l x w x h): 850 x 450 x 1,600 mm
used
Year: ca. 1988 Wario: . tool taper: MK 2 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
Continuous/standard drilling capacity (mm) 20/23 (in E335/ST60) Thread cutting capacity (depending on pitch) M12 Spindle MK II Drilling depth (mm) 100 Projection (mm) 240 Column diameter (mm) 82 Usable work surface (W x L) (mm) 340 x 280 T-slot size (arm), distance (mm), dimension width (mm) Number 2, 125, 13/26 Speed display digital Digital drilling depth display Drilling depth stop quickly adjustable stop ring Feed (mm/revolution) by hand Table height adjustment with rack Motor three-phase current 400V with frequency converter (kW) 1.5 Spindle/work surface distance (mm) 160 – 880 Machine dimensions without packaging (mm) 355 x 705 x 1825 Machine dimensions with packaging (mm) 572 x 936 x 2142 Weight (kg) 195 Standard accessories: Thread cutting device Control panel with OLED display Robust, high-quality drill head hood with ergonomically inclined front LED li ...
used
- Infinitely variable speed control - Quickly adjustable drilling depth stop - Thread cutting device - Undervoltage triggers - Table height adjustment via rack - LED lighting in the head - Continuous/normal drilling capacity R1: 23/25 mm - Thread cutting performance (depending on slope) R1: max.M 16x1 - Spindle MK II - Drilling depth 100 mm - Projection 260 mm - Column diameter 110 mm - Usable table surface (W x L) 420 x 340 mm - T-slot size (arm): number 2, distance 125 mm - Speed display digital - Drilling depth display digital - Drill depth stop quickly adjustable - Feed by hand - Motor three-phase current 400 V - Spindle speeds infinitely variable R1 with 20-2,000 1/min Option: Coolant device: € 525,- FACTORY WARRANTY: 3 years DELIVERY: free domicile incl. packaging NOT THE RIGHT MACHINE? WE ALSO CARRY OTHER FLOTT PRODUCTS - ASK FOR A QUOTE! FAS ...
new
Duration / ALB ear power 25/30 mm Thread cutting capacity Max M20 Spindle MK III Drilling depth 125 mm Throat depth 260 mm Column diameter 110 mm Usable surface [BxL] 420 x 340 mm Speed display scale Drilling depth indicator scale Drilling depth stop with fine adjustment Table height with rack and pinion Motor three-phase 400 V pole changing bar 0.90/1.45 kW Spindle speed with idle, stepless 125-4000 1 / min in 2 levels I: 125-2000 1 / min II: 250-4000 1 / min The levels change via belt apportionment Warranty: 3 years Shipping time: immediately, free loaded DELIVERY: free House including packaging NOT THE RIGHT MACHINE? WE DO ALSO OTHER AFLOAT PRODUCTS - ASK FOR A QUOTE! FLOTT BASE PARTNER .
used
weight approx.: 300 kg, Approx. Onsite Dimension. (l x w x h): 50 x 90 x 195 mm
used
S. No.: 238828
used
Description: Machine number: 56 Spindle speeds: 310 - 2920 rpm Table dimensions: 500 x 400 mm With 4 grooves Drilling depth: up to 120 mm Incl. lot different drill bitsweight approx.: 200 kg, Approx. Onsite Dimension. (l x w x h): 800 x 500 x 1,750 mm
used
taper MK: MK5 round table: ja weight of the machine ca.: 1.200 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
boring stroke: 120 mm, boring diameter: 24 mm, turning speed range: 193 - 2280 rpm, table surface area l x w : 350x350 mm, weight approx.: 150 kg, Approx. Onsite Dimension. (l x w x h): 800 x 500 x 1,800 mm
used
weight approx.: 250 kg, Approx. Onsite Dimension. (l x w x h): 1,000 x 900 x 2,200 mm
used
boring stroke: 120 mm, boring diameter: 32 mm, table surface area l x w : 380x380 mm, weight approx.: 150 kg, Approx. Onsite Dimension. (l x w x h): 800 x 500 x 1,800 mm
used
Description: Column drill Serial number 144B Table dimensions: 320 x 240 mm Vertical spindle travel: 130 mm 8 working speeds: 105 - 1257 Rpm Motor power 1.1 kW Lot 35table surface area l x w : 320x240 mm, weight approx.: 300 kg, Approx. Onsite Dimension. (l x w x h): 660 x 1,000 x 1,870 mm
used
Description: Table dimensions: approx. 315 x 245 mm With swivel table 2 speed settings: 750/1500 rpm With left and right rotary switch Stroke: 0 - 130 mmweight approx.: 1,000 kg, Approx. Onsite Dimension. (l x w x h): 1,000 x 700 x 1,820 mm
used
Description: Column drill Serial number 545-V Table dimensions: 300 x 270 mm Vertical spindle travel: 120 mm 16 working speeds: 75-3360 Rpm Motor power 1.1 kW Lot 6table surface area l x w : 300x270 mm, weight approx.: 300 kg, Approx. Onsite Dimension. (l x w x h): 600 x 700 x 1,950 mm
used
bore capacity in steel (diameter): 30 mmtool taper: MK 4 bore stroke: 225 mmthroat: 315 mmtable-size: 650 x 560 mmfeeds: o,1 bis 1,5 mm/Uspindle turning speed range: 40 - 1800 U/mintotal power requirement: 5,15 kWweight of the machine ca.: 1,0 tdimensions of the machine ca.: 1,2 x 0,8 x 2,5 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
bore capacity in steel (diameter): 3 - 16 mm: max. 1500 mmweight: 300 kgPlease note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Description: Serial number: 8610016 Table dimensions: approx. 355 x 355 mm Power consumption: 1.5 kW With vice Jaw width: approx. 135 mmweight approx.: 750 kg, Approx. Onsite Dimension. (l x w x h): 670 x 500 x 1,750 mm
used
Description: Table displacement: X= 500 mm, Y= 250 mm Excluding machine clampboring stroke: 150 mm, boring diameter: 35 mm, turning speed range: 64 - 920 rpm, table surface area l x w : 700x240 mm, weight approx.: 500 kg, Approx. Onsite Dimension. (l x w x h): 1,100 x 1,100 x 2,250 mm
used
bore capacity in steel (diameter): Ø 25 mmthroat: 209 mmbore stroke: 95 mmturning speeds: 12 Stufen spindle taper: MK 3 table surface area: 308x308 mmdistance spindle /table: 770 mmspindle turning speed range: 200-2440 U/mintotal power requirement: 0,75 kWweight of the machine ca.: 105 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Description: 490 to 2510 rpm Table adjustable in height Voltage 230 volts Without additional accessoriesweight approx.: 40 kg, Approx. Onsite Dimension. (l x w x h): 300 x 400 x 700 mm
used
Key data: 16
- Table diameter: 250 mm - Adjustable height table (clamping height): 0 - 630 mm - Drill chuck: RB 18-16 L (drill diameter up to 16 mm) - Electric connection: 220 V, 50 Hz, 510 W (motor specification) - Dimensions of the stand: 0.50 x 0.30 m - Transport dimensions (HxWxD): 1.80 x 1.20 x 0.70 m (Changes and errors to technical data and prices reserved!)
used
bore capacity in steel (diameter): x mmbore capacity in steel (diameter): x mmthroat: x mmthroat: x mmbore stroke: x mmbore stroke: x mmPOLYHEDRAL DRILLING MACHINEDrilling range:-Square: Spanner opening 3-27mm-Hexagon: Spanner opening 3-32mmDrilling depth:-Square -14mm-Hexagon-13mmThroath150mmMisc accessoriesMore details on www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
: ja vice: 1 quill stroke: ja : : 2.000 mmweight of the machine ca.: 790 kgstrong material: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Key data: 50 mm, 2000 1/min
Solid bench boring mill of the brand Stanko-Import, model 2H125 Stanko import Type: 2H125 Year of construction approx. 1975 massive rod drill with MK4 mount in good condition. Dimensions: L860 x W850 x H2400 Weight approx.: 1050 kg Motor 2,2Kw 380V Drilling depth gauge Automatic threading (RE-LI)up to M24 Drehz. 45 -2000 in 12 stages Feed 0.1-1.6 / Umdr.in 9 levels Projection 200mm Adjustment ranges: quill stroke 280mm Drill head 170mm Table 270mm, 400x400 The machine can be viewed at any time. On-site loading can be easily carried out with a forklift. Transport possible throughout Germany via freight forwarder.
used
Manufacturer: Stankoimport Type: 2H135 Stock number: 0984 Year of construction: 1981 Spindle: CM4 Spindle diameter: 90 mm Spindle stroke: 250 mm Speed: 45 ... 1400 rpm Table size: 500 x 450 mm Table adjustment: 500 mm Dimensions (LxWxH): 1200 x 900 x 2500 mm Machine weight: 1500 kg