used Horizontal Bandsaws for sale

Description: Serial number 555123 minimum outside diameter of the workpiece 100 mm , maximum outer diameter of the workpiece 480 mm , maximum length of the workpiece 11.5 mtotal power requirement: 7,5 kW, weight approx.: 5,500 kg, Approx. Onsite Dimension. (l x w x h): 12,000 x 4,000 x 2,700 mm

Description: Serial number 44731012 , Cutting capacity round material diameter: 4006 mm , Square material cutting capacity: 400 x 400 mm , Maximum loading capacity of the machine: 2500 kg , maximum loading capacity of the roller conveyor: 2000 kg/m Minimum remaining workpiece length to ensure the clamping wheel of 10 mm: 76 mm , Minimum workpiece width for detection: 30 mmweight approx.: 3,000 kg, Approx. Onsite Dimension. (l x w x h): 9,000 x 2,400 x 2,000 mm

Technical data: - Cutting range at 90° around 260 mm - flat 450 x 240 mm - Cutting range at 45° around 230 mm - flat 240 x 200 mm - Machine is mounted on original turnstile - Saw band dimension 3660 x 25 x 0.9 mm - Cutting speeds 20 / 35 / 50 / 70 m/min - Hydr. lifting + lowering the saw frame - Cutting pressure infinitely adjustable 0 - 10 m/min - Total drive power 400 V / 0.8 kW - Coolant device - Space requirement approx. W 2100 x H 1200 x D 1000 mm - Weight approx. 500 kg

: 320 mm: 4160 mm: 610 mm: 320 mm: 610x320 mmdimensions of saw-band: 4160x34x1,1 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 360 mm: 5200 mm: 700 mm: 360 mm: 700x360 mmdimensions of saw-band: 5200x34x1,1 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: CNC control B+S Cutting range at 90° around 320 m flat 320 x 320 mm Material replenishment machine Saw band dimensions 5095 x 34 x 1.1 mm Cutting speed 10 to 120 m/min hydr. Raising – lowering the saw frame upper stroke limit of the saw frame Cutting pressure infinitely adjustable hydr. Material vice Chip conveyor screw Coolant device Discharge roller conveyor 2500 mm Drive 400 V / 4.0 kW Accesories 1x runway 3m, chip conveyor & documentationweight approx.: 4,000 kg, Approx. Onsite Dimension. (l x w x h): 2,500 x 2,000 x 2,400 mm

Cutting capacity round 90°: 150 mm Section flat 90°: 145 x 150 mm Cutting capacity round 45°: 100 mm Section flat 45°: 90 x 150 mm Cutting capacity round 60°: 70 mm Working height: 890 mm Band saw blade dimensions: 1735 x 13 x 0.9 mm Cutting speed, continuous: 20-65 m / min Coolant pump: 100 W Engine power: 0,37 kW Voltage: 230 V Machine dimensions (L x D x H): 1000 x 510 x 1520 mm Approximate weight: 100 kg Features: -Adjustable cutting speed for optimal results -Standard with quick clamping vise and fence -Gearbox with hardened and ground Auger and bronze worm wheel -Fitted with base and coolant system -Ball bearing 3-point blade Guide no seeping effect of blade -For mitre cuts the saw handle is swung (up to 60 °), this space-saving work for long workpieces possible -Twist-free, heavily dimensioned saw bracket Scope of delivery: -Band saw blade -Work piece stop -Base -Quick cla ...

Cutting capacity round 90°: 170 mm cutting capacity flat 90°: 140 x 210 mm cutting capacity around 45°: 125 mm section flat 45°: 100 x 125 mm working height: 890 mm band saw blade dimensions: 2080 x 20 x 0,9 mm cutting speed: 20-90 m / min coolant pump S1 100%: 100 W power: 0.75 of kW machine dimensions (L x D x H): 1250 x 540 x 1600 mm weight approx.: 157 kg

Offer 24012 Specifications: - Saw blade dimensions approx. 2900 x 27 x 0.9 mm - Infinitely variable cutting speeds 18 - 105 m/min - Cutting pressure regulation - Mitre vise - Cutting area - at 90° approx. 250 mm - Square-flat 250 x 250 mm - at 45° approx. 170 mm - square-flat 170 x 170 mm - Drive 400 V / 1.3 kW - Micro spray coolant device -Mot. Chip Clearing Brush - Space requirement approx. W 1850 x H 1050 x D 850 mm - Weight approx. 450 kg

Description: Blade Dimension : 4780x34x1,1 Speed rotation: 22 to 90 rpm Vice: 510 mm Angled cut 0° cylindrical and square cut 320 mm Flat cut 510x320mm 45°+/- cylindrical cut: 320 mm Square cut: 320 mm Flat cut: 320x310 mm 60° +/- Cylindrical cut: 170 mm Square cut: 170 mm Flat cut: 240x170 mmweight approx.: 900 kg, Approx. Onsite Dimension. (l x w x h): 800 x 2,000 x 1,800 mm

Description: Controlled descent. Serial number: AB1190 Blade Dimension : 4780x34x1,1 Speed rotation: 22 to 90 rpm Vice: 510 mm Angled cut 0° cylindrical and square cut 330 mm Flat cut 510x330mm 45°+/- cylindrical cut: 330 mm Square cut: 330 mm Flat cut: 320x310 mm 60° +/- Cylindrical cut: 170 mm Square cut: 170 mm Flat cut: 240x170 mmweight approx.: 1,000 kg, Approx. Onsite Dimension. (l x w x h): 700 x 2,100 x 1,810 mm

Description: Saw blade speed 18 to 110 m/min , Includes documentationcutting diameter: 260 mm, total power requirement: 4 kW, weight approx.: 1,300 kg, Approx. Onsite Dimension. (l x w x h): 2,100 x 2,100 x 1,300 mm

Description: Cutting area round material 260 mm , Cutting area square material 260 x 260 mmweight approx.: 1,500 kg, Approx. Onsite Dimension. (l x w x h): 6,800 x 2,300 x 1,550 mm

Description: speed 36/72 m/min blade size 2950x25.4x0.9 mm start/end of shift 60/10 barweight approx.: 1,000 kg, Approx. Onsite Dimension. (l x w x h): 900 x 1,500 x 1,700 mm

Description: Roller feed 1500 x 370 mm, , Roller outfeed 1500 x 370 mm, with stop 1680 mm Includes metal replacement saw blades band dimensions: 2950x27x0,9 mm, cutting range 90 degrees: flat: 280x200 mm, cutting range 90 degrees: round: 250 mm, cutting range at 45°: flat mat.: 180x180 mm, cutting range 45 degrees: round: 190 mm, cutting range 45 degrees: square: 180 mm, weight approx.: 450 kg, Approx. Onsite Dimension. (l x w x h): 1,600 x 800 x 1,600 mm

Description: cutting diameter: 250 mm cutting belt length: 2835 mm belt speed: 36 - 72 m/min 45 degree capacity: flat 210 mm 45 degree capacity: round 220 mm 45 degree capacity: 210 mm square cutting width: 310 mm table height: 850 mm total power requirement: 2.2 kW manual material clamp foot control cutting diameter: 250 mm, band dimensions: 2,835 mm, cutting range at 45°: flat mat.: 210 mm, cutting range 45 degrees: round: 220 mm, cutting range 45 degrees: square: 210 mm, weight approx.: 500 kg, Approx. Onsite Dimension. (l x w x h): 1,400 x 1,000 x 1,750 mm

Cutting range round 0°: 127 mm Cutting area flat 0°: 125 x 130 mm Cutting range round 45° right: 90 mm Cutting area square 45° right: 90 x 90 mm Cutting range approx. 60° right: 45 mm Cutting area square 60° right: 45 x 45 mm Vice opening: 130 mm Band saw blade dimensions: 1440 x 13 x 0.65 mm Cutting speeds: 30 - 80 m/min Motor power: 0.55 kW Voltage: 230 V Weight approx.: 25 kg Characteristics: - Two cutting speed levels for optimal adaptation to the workpiece - For miter cuts, the saw bracket can be swivelled up to 60° - Including workpiece stop for rational work - Optimum cutting results thanks to band saw blade guide with ball bearings - High-torque engine, even under continuous load - Under load, the motor electronics keep the cutting speed largely constant - Environmentally friendly, as there is no need for lubricating and coolant fluids - Smooth, low ...

Cutting range round 0°: 150 mm Cutting area square 0°: 150 x 150 mm Cutting area flat 0°: 150 x 165 mm Cutting range round 45°: 115 mm Cutting area flat 45°: 115 x 130 mm Cutting range round 60°: 60 mm Cutting area flat 60°: 70 x 70 mm Working height: 700 mm Band saw blade dimensions: 1735 x 13 x 0.65 mm Cutting speeds: 40 - 80 m/min Motor output power S1 100%: 0.75 kW Voltage: 400 V Machine dimensions: 1200 x 750 x 1250 mm Weight approx.: 85 kg Characteristics: • For cutting profiles, tubes, solid materials made of VA, iron and non-ferrous materials • For miter cuts, the saw bracket can be swivelled by up to 60° • Infinitely variable lowering via hydraulic lowering cylinder • Torsion-free, strongly dimensioned saw arm made of grey cast iron • 2 cutting speeds for optimal cutting results • Robust construction, therefore smooth and vibration-fre ...

Cutting range round 0°: 150 mm Cutting area square 0°: 150 x 150 mm Cutting area flat 0°: 150 x 165 mm Cutting range round 45°: 115 mm Cutting area flat 45°: 115 x 130 mm Cutting range round 60°: 60 mm Cutting area flat 60°: 70 x 70 mm Working height approx.: 700 mm Band saw blade dimensions: 1735 x 13 x 0.65 mm Cutting speeds : 40 / 80 m/min Motor output power S1 100%: 0.75 kW Voltage : 400 V Machine dimensions : 1200 x 750 x 1250 mm Weight approx.: 85 kg Characteristics: • For cutting profiles, tubes, solid materials made of VA, iron and non-ferrous materials • For miter cuts, the saw bracket can be swivelled by up to 60° • Infinitely variable lowering via hydraulic lowering cylinder • Torsion-free, strongly dimensioned saw arm made of grey cast iron • 2 cutting speeds for optimal cutting results • Robust construction, therefore smooth and vi ...

No. 4428: 1 gebr. Horizontal band saw Fabr. SAMUR, type S-1000 V, Bauj. 1966 Arb.-Ber.: 800 mm throughlet width, Accessories: Table Dimensions: 610 x 610 mm Table extension on the left with welding device Other: Cutting height 350 mm Cutting speed 20-800 mm Sheet length: 4,550 mm. Blade width: 4 to 15 mm. Speed infinitely variable Cutting speed: 23-711 m / min Electric motor 380 V

Description: Cutting length: approx. 400 mmweight approx.: 300 kg, Approx. Onsite Dimension. (l x w x h): 2,000 x 1,100 x 1,600 mm

Description: 1 used small band saw make: Ulmia, model: BSD, built in 1984 Cutting height 140mm Projection 200 mm Roll diameter 210 mm Cutting speed 920 m/min. Belt length 1500 mm Table size 350 x 350 mmweight approx.: 25 kg, Approx. Onsite Dimension. (l x w x h): 760 x 440 x 365 mm