used Edge gluing machines for sale

Description: • Edgebander • Serial number 2697 • Edge thickness in roll from 0.40 mm up to 3 mm • Worpiece thickness from 8 mm up to 40 mm • Feed motor 0.37 KW • Edge feeder, edge magazine for one edge coil • Gluing unit with pot for granulated hot melt adhesive • Pressure group with (1+2) rollers • End trimming unit • Fine trimming unit, 2 x motor 0.36 KW-12000 rpm, tiltingApprox. Onsite Dimension. (l x w x h): 2,800 x 980 x 1,450 mm, weight approx.: 700 kg

Technical details: - Premilling Unit - Corner Rounding Unit - Maximum panel thickness: 65 mm - Operating Units: 9

Description: - Edge banding machine - Serial number 37082 - Total installed power 32 KW - Edge thickness in strips up to 20 mm - Edge thickness in the roll from 0.30 mm to 3 mm - Workpiece thickness from 10 mm up to 60 mm - Adjustable feed speed from 10 m/min up to 24 m/min - Feed motor 5.50 KW - Motorized height adjustment - CNI control - Joint cutting unit, 2 x motor - Edge feeder for strips and roll, edge magazine for one edge roll - NORDSON MC 12 gluing unit for PUR adhesive - Pressure unit with (1+6) rollers - Snipping unit, 2 x motor - Rough trimming unit, 2 x motor (upper motor missing) - Fine trimming unit, 2 x motor 0.65 KW-12000 rpm - Profile trimming unit, 2 x motor - Profile scraper unit - Trimming unit swivels from 0° to 90°, motor 3 KW-3000 rpm - Flat scraping unit - Edge buffing unit, 2 x motor - Hot air blower unitApprox. Onsite Dimension. (l x w x h): 10,700 x 1,250 x  ...

Description: serial number: 1000017130 control: BIESSE  , max. glue thickness: 3 mm max. glue-on height: 65 mm max. thickness of roll material: 3 mm min. workpiece length: 100 mm min. workpiece width: 150 mm max. workpiece thickness: 90 mm max. feed rate: 25 m/min.  , comfortable looptec system BIESSE 2 glueing units in the row (exchange of color from panel) CNC set up off all machine from panel maximum thickness of panel: up to 90 mm Nordson system for PUR included (wtih conecton to one gluing unit) airforce system change of glue + tape based on the barcode CNC grooving unit  , please also have a look at the video and the PDF documents of this machine serial number: 1,000,017,130, workpiece thickness: 90 mm, feed: 25 m/min, control: BIESSE, Approx. Onsite Dimension. (l x w x h): 12,000 x 3,500 x 2,000 mm, weight approx.: 12,000 kg

Description: serial number: 36789 Technical specifications: total installed power 33 kW, 63A, 50Hz panel length - min 150 mm - max 3200 mm panel width - min 120 mm - max 3200 mm panel height -min 10 mm - max 60 mm edge thickness in the roll from 0.30 mm to 3 mm workpiece thickness from 10 mm up to 60 mm edgebanding strip height - min 15 mm - max 65 mm working line height 950 mm panel projection from drive belt 50mm adjustable feed speed from 10 m/min up to 24 m/min motorized height adjustment CNI control, display replaced with a flat screen anti adhesive spraying device joint cutting unit, 2 x motor 5kW, 12.000 rot/min edge feeder for roll, edge magazine for two edge rolls gluing unit for EVA adhesive, granulated 2 gluing units: 1 unit that apply the glue on the panel edge and 1 unit wich apply glue on the edge, for softforming applications. These units must change depending on the des ...

EDGE BANDING machine BIMATIC B 220 IR-S second hand machine for edging veneer, PVC, Abs , wood volt. 220 ( 3 phases ) . by applying a 9 kW electric transformer the machine operates at 380 volts. composed by : 1. glue pot 2. edge cutting shear 3. end trimming unit 4. trimming unit / tilting chamfering unit technical details : edge thickness min. / max. mm. 0,4 / 10 panel height mm. 60

Description: BIMATIC edgebander model SYNCRO 4105.8 : - control panel with electronic control - panel thickness from 8 to 45 mm - feed speed 10 mt/min - overall dimensions approx. 5.1 x 1.2 x h=1.6 m - Operating groups: - gluing unit with: hot-melt glue tank with rapid heating (approx. 5/6 min.) loader and cutter for roll material from 0.4 to 3 mm loader for solid strips up to 8 mm - double vertical end trimmers, hp motors 0.3+0.3, tiltable 0 - 15° - overlapping trimmers, non-tilting, hp motors 0.5+0.5 - trimmers inclinable 0 - 25°, hp motors 0,5+0,5 - edger with 1 hp motor 0,5 - straight edge sander, hp motor 2Approx. Onsite Dimension. (l x w x h): 5,100 x 1,200 x 1,600 mm, weight approx.: 1,360 kg

Description: machine number: 0-261-20-8279 workpiece thickness: 8 - 50 mm edge material thickness: 0,4 - 3 mm feed speed: 11 m/min extraction diameter: 3x80/1x100 mm pneumatics: 6 bar  , please also have a look at the PDF document of this machine serial number: 0-261-20-8279, edge thickness: 3 mm, workpiece thickness: 8 - 50 mm, feed: 11 m/min, Approx. Onsite Dimension. (l x w x h): 4,153 x 1,525 x 2,182 mm, weight approx.: 1,300 kg

BRANDT KDF 660 Profiline single-sided edge banding with joint milling, pre-milling, fine milling, 2-fold corner copying, radius drawing blade, flat-drawing blade and babble units Type: KDF 660 Profiline Specifications: BRANDT KDF 660 Profiline with joints and corner rounds Preheating of the tool stucco IR preheating Edge thickness 0,4 - 15mm Banding height max. 66 mm, with program high adjustment Caps from the roll at 3mm thickness max 45mm height or 0.8 65mm Plate thickness max. 8-60 mm for corner copying max 40mm Control PC20+ link control (loss of contact), with modem for remote service/maintenance 1. Joint unit program Adjustment of the infeed line 2. Bandkapmesser 3a. Radiant heater High-strength bonding by workpiece preheating 3b. Spray anti-adhesive 3c. Quickmelt Glue Mel Mel Application Unit with Quick Change 3d. Leimangabe by means of glue rol ...

Key data: 3 mm, 50 mm, 4150 mm

I am selling a fully equipped edge banding machine BRANDT Ambition 1220, built in 2010: Configuration: Manually adjustable entrance stop Manually adjustable joint milling Edge Banding EVA Glue Manually adjustable material pressure zone Pneumatically adjustable cross-cut saws Radius milling top + bottom manually adjustable Round unit 1 motor manually adjustable Radius scraper R2 pneumatically shut-off Control panel Working height adjustable by servo motor Material height 8-50mm Edge material thickness 0.4-3mm Feed speed 10m/min. Overall length including feed plate 4150mm Total weight 1320kg Very good condition, fully functional!

Edge banding machine with joint/form milling machines Brandt Highflex 1220 FC YOC 2015 Workpiece thickness 8 - 60 mm Edge thickness 0.4 - 3.0 mm Feed speed 10 m/min Joining Milling – DIA Tools Gluing unit Contact heating shoe Pressure zone Pneumatic Package Cross-cut unit Flush milling unit Profile drawing blade unit Schwabbelaggregat Electronics control Machine length 4200 mm Machine dimensions W x H 1300 x 2180 mm Weight 1400 kg

Edge glue Brandt Type: KD 86 Built: 1993 Edge thickness up to 12 mm Glueing of roll up to 3 mm with pneumatic cross-cut station Glued part with Quickmelt pre-melting tank Heavy pressure zone with one driven and three reprint rollers Saw cutting station for the front and rear overstanding Milling station flush / chamfer Second milling station radius milling R 3 mm Corner copying with pass Radius drawing blade R 3 mm Chip catching box Schwabbelstation Pneumatic package for post-processing agregates Extendable support for large parts Control panel at eye level Space requirement approx. 6100 mm

One-sided edge gluing machine in right version for hot melt adhesive gluing. equipment: - Glued part for hot melt adhesive granules - Autom. Edge magazine with roller plate - Pre-cap scissors - Pressure zone with hooded pressure roller and 2 trailing rollers - centrally adjustable upper pressure - Cap unit 2 x 0.27 kW - Büdig milling unit 2 x 0.35 kW - Drawing blade unit for PVC edges (chamfers/rounds of pre-milled PVC edges) - Swib ledunit 2 x 0.18 kW specifications: Edge thickness 0.4 - 5 mm Roller separation max. 3 x 30 mm (PVC) or 0.8 x 60 mm Workpiece thickness 10 - 50 mm Workpiece width min. 70 mm Workpiece length min. 160 mm Feed 11 m/min. Electric400 Volt - 3 Ph. - 50 Hz Connection value approx. 5 kW Pneumatic connection 6 bar Total length 4000 mm Weight approx. 1050 kg

Edge banding machine Brandt Optimat KDF 1600 GC YOC 2009 Edge thickness 0.4 - 12 mm Plate thickness 8 - 60 mm Feed 12 m/min Inlet ruler adjustable Pneumatic package Automation package Quickmelt Premelting Unit Joining milling unit 2 x 2.2 kW Cross-cut unit chamfer / Straight 2 x 0.35 kW Milling unit 2 x 0.55 kW Mould milling unit 2 x 0.35 kW (2 units) Drawing blade unit with quick-change heads Surface drawing blade for glue joint Schwabbelaggregat 2 x 0,18 kW Electronics control Connection value 11.5 kW Machine length approx. 6600 mm Weight 2900 kg

Description: Brand: Brandt Type: KDF 210 Year of construction: 2014 Machine number: 0-261- 20-7902 Control: Easy Control 10+ Speed-controlled track control with optical start-stop indication sensors Control screen: LCD, 4 lines of text, ergonomically integrated on the input side on the hood Configuration: Chain conveyor transport Central lubrication Upper pressure/ guidance: via central adjustment with 2 rows of rollers positioned offset to each other Joint cutters: (2x) 0.75 kW, 200 Hz Diamond-tipped tool, manual positioning (Siko counters), max. 3 mm overhang and max. 40 mm workpiece thickness Glue unit: A3 glue unit for hot-melt and possibility for PU glue application Glue output roller under workpiece in following or counterflow mode Heavy-duty cutter Pressure zone: Pneumatically driven 1st pressure roller, 2nd roller running freely ensures good compaction Hacksaws: (2x) 0.18 kW,  ...

Description: Machine-nr.: 0-261-26-5028 Control: EC 10+ Speed-controlled control with optical start-stop indicator sensors Operating switch: ergonomic LCD switch mounted on the head Border thickness: 0.3 mm / max. 8.0 mm Band cutting device: 0.4 - 3.0 mm (Max. 3.0x30 mm / 1.0x55 mm) Band width edges: max. (1x) 55 mm / (3x) 45 mm Workpiece thickness: 8 - 50 mm . Workpiece width: min. 60 mm Workpiece overhang: min. 38 mm Performance: 11 m/min Workpiece pre-heating Roll magazine: Max. ø800 mm Cut-off shear: 3 mm Glue aggregate1: Hot melt granule Glue pot under glue output roller Gluing roller in travel or - in counterflow Glue aggregate 2: Airteq Hot-Air glue aggregate Pressure zone: Pneumatically driven (1st pressure roller, 2nd roller running freely ensures good compaction) Air supply units: (2x) 2.2 kW, 200 Hz Includes mounted DIA cutters Gluing unit: workpiece preheating Pressure zone ...

Description: BRANDT KDF 660 Profiline with joint cutter and corner rounder PU glue (and hot melt glue) Workpiece preheating: IR preheating Edge material: 0.4 - 15.0 mm Max. width of edgebanding: max. 66 mm (at 1 mm band thickness) Edging material on the roll: Max. 6 mm to 45 mm, max.0.8 to 65 mm Workpiece thickness: Max. 8-60 mm Control: PC20+ Streckensteuerung with modem for teleservice 1. Joint milling 2. Chopping knife 3a. Pre-activation with IR heating 3b. Anti adhesive spray device 3c. Pre-melter, for quick change of adhesive 3d. Glue aggregate with glue application roller in follow-on or counterflow 3e. Program-controlled pressure zone 4. Capsaws - adjustable 0° - 15° 5a. Coarse milling (Bündig milling) -radial Milling units with 2-point adjustment, flat, phase radius up to 12 mm edge thickness 5b. Fine milling, with program-controlled adjustment for thickness, plane, phase or r ...

I am selling a fully equipped edge banding machine BRANDT ProfiLine KDF 790, built in 2006: Configuration: Input stop can be adjusted by menu Manually adjustable joint milling Edge banding with preheating tank Material pressure zone can be adjusted by servo motor Pneumatically adjustable cross-cut saws Heavy milling at the top + at the bottom manually adjustable Radius milling top + bottom servo motor adjustable Groove saw unit at the bottom Round unit 2-motor servo motor adjustable Radius scraper blade R2 pneumatically adjustable / second set R1 included Scraper blade surface Polishing brushes Separator injection at the front Clean injection at the rear Working height adjustable by servo motor Material height 6-60mm Edge material thickness 0.4-12mm Feed speed up to 20m/min. Overall length including feed plate 7860mm Mileage status 1,650,000 meters glued. Incl ...

Edge gluing machine Brandt Type: KTD 14 Built: 1996 Edge gluing machine with direct glue indication for gluing Edge materials on straight workpieces. Processing units: Install Glue indication Roller separation Flush milling Caps Workpiece thickness 10 - 40 mm Edge material thickness 0.4 - 1.2 mm Workpiece width min. approx. 50 mm Workpiece length min. approx. 260 mm Feed 6 m/min. Operating voltage 400 V+/- 10% - 3 Ph - 50 Hz Heating capacity 1.2 kW Connection value 3.04 kW Electrical connection cable length approx. 4.5 m Compressed air connection 7 bar Operating pressure 6 bar Weight: approx. 150 kg Space requirement: approx. 1800 x 1600 mm

Key data: 8 mm, 50 mm, 5860 mm

I am selling a fully equipped edge banding machine BRANDT Optimat KDF 550 C, built in 2006: Configuration: Manually adjustable entrance stop Manually adjustable joint milling Edge banding EVA Material pressure zone can be adjusted by servo motor Pneumatically adjustable cross-cut saws Radius milling top + bottom manually adjustable Round unit 2 motor manually adjustable Radius scraper R2 pneumatically shut-off Scraper blade surface Polishing brushes Control panel Power Control PC20+ Working height adjustable by servo motor Material height 8 - 50mm Edge material thickness 0.4 - 8.0mm Feed speed 11m/min. Assembly length including feed plate 5860mm Total weight 2660kg Very good condition, fully functional!

Single-sided edge banding machine Brandt type OPTIMAT KDF 650 C edition Specifications: • Feed rate (m/min.): 8 - 18 • Feed max. with form milling machine (m/min.): 14 • Working height (mm): 950 • Pneumatic connection (bar): min. 6 • Overall length (mm): 6,060 Workpiece and edge parameters: • Workpiece width min. at workpiece thickness 8 - 22 mm: 70 mm (depending on workpiece length) • Workpiece width min. for workpiece thickness 23 - 40 mm: 120 mm (depending on workpiece length) • Workpiece width min. at workpiece thickness 41 - 60 mm: 150 mm (depending on workpiece length) • Workpiece protrusion (mm): 38 • Workpiece thickness (mm): 8 - 60 • Edge height max. = workpiece height (mm): + 6 • Edge Material Roll (mm): 0.4 - 3 • Max. edge cross-section for PVC: 135 mm² • Max. edge cross-section for veneer: 100 mm² • Roll diameter max. ( ...

Equipment: - Quick-change gluing part for hot melt adhesive - Autom. Edge magazine with roll plate - Pressure zone with pneum. pressurized pressure roller and 2 free-running repressure rollers - Power Control PC 20+ control - Inlet ruler adjustable - Joining milling unit 2 x 2.2 kW - pneum. Adjustment caps, drawing blade, program adjustment side button rollers and pneum. 2-point adjustment vertical probe rollers - Cross-cut unit 2 x 0.18 kW - Milling unit 2 x 0.55 kW - Mould milling unit 1 x 0.35 kW - Drawing blade unit for PVC edges - Surface drawing blade glue joint - Cleaning agent specification workpiece - Schwabbelaggregat Specifications Edge thickness 0.4 - 8 mm Roller cutting max. 3 x 45 mm or 0.8 x 65 mm Workpiece thickness 8 - 60 mm Feed max. approx. 11 m/min. Electrics 400 V - 3 Ph. - 50 Hz Connection value approx. 10.5 kW Pneumatic connection 6 bar To ...

Equipment: - Quickmelt gluing part for hot melt adhesive - Automatic edge magazine for rolls and fixed lengths - Heavy pressure zone with driven, pneumatically applied main pressure roller and 2 free-running repressure rollers. (adjustable by program) - motor-adjustable upper pressure. - Control panel on the machine inlet. - Electronic control power control PC 20+ - Feed variable 8-14 m/min - PU overpressure rollers - Inlet ruler adjustable by program - Joining milling unit 2 x 2.2 kW - Bevel cross-cut unit/straight 2 x 0.18 kW - Milling unit 2x0.55 kW (adjustable by program) with multiple roller pressing - Mould milling unit top+bottom, 2 x 0.35 kW - Drawing blade with quick-change heads and additional device for pointed workpieces - Glue joint drawing blade - Schwabbelaggregat - Automation package for 1-milling machines, consisting of: 3175 - Pneumatic Adjustment Caps ...

Equipment: - Quick-change Quickmelt gluing part for hot melt adhesive. - Automatic edge magazine with roll plate and autom. Edge feeder - extended inlet ruler, adjustable - heavy pressure zone (with pgroamm adjustment) with a driven main pressure roller, as well as 3 repressure rollers - Motor-adjustable upper pressure. - Control panel on the machine inlet. - Electronic control PC 16 - Modem for remote service and remote maintenance - Noise protection cladding - autom. Chain track central lubrication - Interface for return (electronic) DAHR01/02/15 Aggregate assembly - Release agent specification workpiece - Joining milling unit 2 x 2.2 kW - Cross-cut unit 2 x 0.35 kW, pneum. Adjustment chamfer/straight - Milling unit 0-25 degrees, 2 x 0.55 kW counter-rotation, to flush milling machine, pneum adjustable pneum. 2-point adjustment Vertical probe rollers - Milling unit ...

Equipment: - Machine stand throughout - Fixed stop side right - Paint finish Grey RDS 240 80 05 - Inlet ruler motorically adjustable, extended by 300 mm - Inlet lock pneumatically controlled - automatic edge feeder - Upper pressure: belt upper pressure - Height adjustment motorized - Position display and input centrally via the controller - Transport chain with rubber support, 80 mm wide - automatic central lubrication for the transport chain - Workpiece support in scissor design, approx. 1000 mm extendable - Noise protection equipment - Hood interior lighting 3 lamps - Control Power Control PC20+ Aggregate technology: - Joining milling unit 2 x 2.2 kW 200 Hz (60 mm joining milling cutter set) - Gluing unit A15 (workpiece preheating, QA34 application unit, infrared adhesive activation, magazine for rolls and fixed lengths, pressure zone with motorized adjustment, driv ...

for bill of exchange order unit

Brand 1110F - KDF110 Optimat Brand: Brandt Type: KDF 110 Year of construction: 2015 M-No.: 0-261-20-5386 Control: Easy Control 10+ Non-contact route control Feed controlled with start-stop optic-indicative sensors Screen: LCD, 420 letters, 4 program memories Configuration: Chain conveyor feed: Standard equipment with central lubrication for the transport chain. Top pressure rollers/product guidance: Zentra control, 2 roller conveyors positioned opposite each other Joint milling unit: 2 x 0.75 KW 200 HZ Including joint milling set in DIA design, with manual positioning via Siko counter, max. 3 mm removal and max. 40 mm workpiece thickness Gluing unit: A3 gluing part for hot melt glue and possibility for PU application, magazine, pressure zone with electro-pneumatic 2 point positioning via central control Pressure zone: 1st roller driven and 2 rollers running freely fo ...

Brand 1210F - KDF210 Optimat Brand: Brandt Type: KDF 210 -1210F Year of construction: 2014 Control: Easy Control 10+ Non-contact route control Feed controlled with start-stop optic-indicative sensors Screen: LCD, 420 letters, 4 program memories Configuration: Chain conveyor feed: Standard equipment with central lubrication for the transport chain. Top pressure rollers/product guidance: Zentra control, 2 roller conveyors positioned opposite each other Joint milling unit: 2 x 0.75 KW 200 HZ Including joint milling set in DIA design, with manual positioning via Siko counter, max. 3 mm removal and max. 40 mm workpiece thickness Gluing unit A3 gluing part for hot melt glue and possibility for PU application, magazine, pressure zone with electro-pneumatic 2 point positioning via central control Pressure zone: 1st roller driven and 2 rollers running freely for good and con ...

Description: COMPOSITION: Anti-adhesive group Grinding group Infrared lamp Glue tank group Pneumatic shear, pressure rollers, edge feeding system Trimming group Edge trimming group Edge scraping group Brush group TECHNICAL DATA Panel height 8 - 45 mm Edge thickness 0.4 - 3 mm (coil) / 0.4 - 5 mm (strips) Minimum panel width 95 mm Minimum panel length (edge side) 210 mm Panel feeding ,speed 7 m/min Infeed grinding motors (each) 200 Hz - 12,000 rpm - 0.75 kW Glue tank resistors 1490 W - 6 cartridges Trimming blade rotation speed 9,000 rpm Trimming motor 50 Hz - 0.18 kW Trimming motors (each) 200 Hz - 12,000 rpm - 0.22 kW Milling tools ,with WIDIA combined knives (radius/chamfer) Ø 75 mm Z4 - shaft ,Ø 16 mm (r=2 - 3 mm) Total installed power approx. 5 kW Approx. Onsite Dimension. (l x w x h): 2,450 x 800 x 1,450 mm, weight approx.: 450 kg

Cehisa EP-7 Edge Lijmer Brand: Cihesa Model: EP-7 Product gegevens: Edge thickness: 0.4 - 3.0mm (massief 5.0 mm) Banding height 10 - 60 mm Roll ø750 mm Panel thickness max. 8-60 mm Min. workpiece length: 120 mm Min. workpiece width: 75 mm Machine data: Control: Relay control 1. Tape capping 2. Gluing part 3. Cross-cut saw with HF motor 4. Flush milling - radius milling unit Feed: 10 m/min. Tool support radius mm Suction: MM Afzuig capaciteit: m³/hour Compressed air: 6 - 7 bar Dimensions LxWxH 2.9 1.2 1.5 mm (incl. plate 1.8 m) weight: 750 KG Electricity: 5,1 KW

I sell a new edge banding machine Cormak EBM300, year of construction 2022: LCD touchscreen display for setting the machine parameters and aggregates ON/OFF connection. Top feed belt 6 m/min. Element height 10 - 50 mm Edge thickness 0.4 - 3 mm  edge banding,  Sawing the final cut Radius R2 Milling Polishing brushes Total weight 400kg Length 2,30m (including edge plate 2,60m)! Feed zone only 1.30m long, convenient for the smallest workshop, or as an additional machine for edge banding the small work stucco quantities. New machine including warranty ratios, possible to try ! Full documentation and CE included. Available the same.

Hot air moulded part edge banding machine, pre-coated edges, Roller separation, stencil preference, second blower for edge heating.

Description: supply voltage 3 x 400 (50 Hz) V standard installed power 11 kW, with the airmotion option 16 kW feeding table with air cushion 1050 x 400 mm milling group application group cutting group at the ends rounding group at the ends radia finishing group surface finishing group finishing group with brushes constructive characteristics, standard working dimensions: the minimum width of the processed part - 70 mm the minimum length of the processed part - 140 mm the minimum height of the processed part - 8 mm the maximum height of the processed part - 60 mm the thickness of the applicable PVC/ABS edge film - 0.4 - 3.0 mm applicable thickness of solid wood wand - 0.4 - 12.0 mm compressed air working pressure (min/max) >,7 / 12 bar compressed air system pressure >,8 bar internal diameter of compressed air installation connection: 13 / 1/2' mm for more details see 4-Tempora F800. ...

The plant description will follow in the coming days

Description: Serial n°: 200.07.006.15 maximum adhesive thickness in 10 mm maximum panel thickness 60 mm maximum thickness of rolled material 3 mm minimum piece length 140 mm minimum workpiece width 70 mm maximum feed rate 12 m/min electric height adjustment pre-heating zone granular gluing system glue container below the food chain changeable glue tank suitable for PUR glue spraying system straightening unit End cutting unit 2 motors flush/radial/bevelling stations 1 Edge copying unit 1 motor scraping unit Edge scraper, Flat scraper polishing unit strip magazine synchronised aggregate NC axis(es) machine model from left to right machine length in 5.140 mm FORMAT 4 E-MOTION control Loading cost to be definedserial number: 200.07.006.15, edge thickness: 10 mm, workpiece thickness: 60 mm, feed: 12 m/min, control: FORMAT 4 E-MOTION, total power approx: 11 kW, Approx. Onsite Dimension. (l x  ...

Equipment/technical data: - Support plate for rolls - Gluing part with glue basin and pressure zone - Impact scissors - Cross-cut saw unit - Flush and radius milling unit - Pulling blade unit - Polishing unit with spraying unit - Hair dryer unit - Machine operation via touch screen - Workpiece width min. 60 mm - Workpiece length min. 140 mm - Workpiece thickness 10 - 55 mm - Roll material from 0.4 - 3 mm thickness - Strip material up to 8 mm thick - manual upper pressure adjustment by hand crank - Dimensions: 4,163 x 750 x 1,480 mm - Suction connection Ø 2 x 120 mm - electr. Connection: 400V; 50Hz; 12kW; 40.5A Technical data subject to actual equipment

Equipment/technical data: - e-Motion control with 21" smartouch instead of 10" tempora F 800 Ser - Upper pressure beam motor-controlled, adjustable workpiece height 8-60 mm - Chain feed 12 m/min, 1.5 kW, Minimum workpiece length 140 mm - Turntable edge magazine for roll edge material 0.4 - 3 mm and strip magazine for 12 pieces 10 mm edges - Edge feeding for roll and strip material - pneum. Controlled gluing unit, Teflon-coated, for 1.5 kg EVA granules, with synchronized glue roll and quick-change system. (for PUR adhesive processing, taking into account the Adhesive processing guidelines) - Pneumatically operation-controlled pressure unit e-motion (one driven, two conical contact rollers) tempora 60.12/2: 0-12mm - Impact shears for roll material - Cross-cut saw with 2 motors - Joining milling unit 2 x 1.5 kW - Upper and lower combination milling unit, 0.75 kW each, flush a ...

The workpiece return transport consists of an air cushion table with pneumatic tilting movement, complete with pusher, return conveyor with motorised belt and a not-driven roller conveyor. The panel comes out of the edge banding machine onto the air cushion table which tilts over and drops it, with the aid of the pusher, onto the return belt, situated at a lower level. The air cushion table has transfer belts to takeover the parts from the edge banding machine. Dimensions of air cushion table 1.200 x 2.400 mm Belt width 1.300 mm Installed power 3 kW workpiece return transport is deliverable for basic edge banding machine length 3.500 up to 12.500 mm

SPECIFICATIONS: Workpiece thickness max mm: 60 Edge material thickness mm: min 0.5 - max 3.0 Minimum radius border min mm: 20 Solid wood max mm: 8 Cutting scissors CW: 2.5

Description: FRAVOL manual edgebander model A16/AC for pre-glued edgesApprox. Onsite Dimension. (l x w x h): 750 x 650 x 1,000 mm, weight approx.: 100 kg

Approx. Onsite Dimension. (l x w x h): 3,100 x 900 x 1,650 mm, weight approx.: 1,000 kg

Description: serial number: 201011RX000004 machine type: monolateral, left side total installed power 21,8 KW, 59A, 50Hz panel length - min 120 mm panel width - min 60 mm panel height -min 10 mm - max 60 mm edge thickness in the roll from 0.4 mm to 3 mm edge thickness for strip: 3-16mm min length for strips: 180mm minimum distance between 2 panels: 800mm edge banding strip height - min 12 mm - max 63 mm adjustable feed speed from 10 m/min up to 20 m/min motorized height adjustment CN control, anti adhesive spraying device edge feeder for roll, edge magazine for two edge rolls gluing unit for EVA adhesive, granulated pressure unit for straight edges snipping unit, 2 x motor 0,5kw, 12.000 rpm rough trimming unit, 2 x motor 1,1 kw, 12.000 rpm fine trimming unit, 2 x motor 0.37 KW-12.000 rpm corner rounding unit, 2 x motor, 12.000 rot/min profile scraper unit  , serial number: 201011RX0 ...

Description: - Hot use of pre-glued strips for finishing linear and shaped panels - Main motor 3.95 kW - Accidental burn protection - Height adjustable edge guide - Rubber pre-tape roller - Double flat scrapers on both sides of the panel - Edge header - Edge thickness 0.8 - 2 mm - Min/Max panel thickness 12/43 mm - Working speed: 7 m/min The item that is delivered is NOT the one shown in the pictures, but an equal oneApprox. Onsite Dimension. (l x w x h): 2,000 x 670 x 1,260 mm, weight approx.: 470 kg

Description: - Hot gluing of pre-glued strips for finishing linear and shaped panels - Main motor 3.59 Kw -Protection against accidental burns - Height adjustable edge guide - Pre-tape rubber roller - Double flat scrapers on both sides of the panel - Edge header - Edge thickness 0.4 - 2 mm - Min/max panel thickness 12/43 mm - Working speed: 7 m/minApprox. Onsite Dimension. (l x w x h): 2,000 x 670 x 1,260 mm, weight approx.: 485 kg

single-sided edge banding machine with pull-out workpiece support, end trimming unit and combi-unit. Power consumption: 400 V / 50 Hz / 3 pH / 7 kW Compressed air supply: 6 bar Dimensions: approx. 4,000 x 1.300 (1,780) x 1520 mm Edition extendable to 800 mm Working height: 820 mm Roller plate ø 700 mm

Key data: 1 mm

Equipment and technical data: Edge banding machine for pre-coated edge material High-performance heat gun Roll capping electromagnetic Edge milling machine Sytem Hebrock End capping: Cross-cut module for flush cutting the front Edge protrusion Feed: 3-roller system Boom on both sides Add-on trolley, mobile max. edge thickness approx. 1 mm max. workpiece height approx. 50 mm min. workpiece length approx. 170 mm min. workpiece width approx. 50 mm Feed rate approx. 4 m/min. Ready for use: approx. 1 minute Dimensions 1730 x 690 x1240 mm Weight approx. 115 kg Sale takes place in the ACTUAL state Technical information, description of condition, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale In the case of used machines, any warranty is excluded, it is valid to buy as well  ...

Description: Quick melt glue pot Heated infeed fence Roll trimmer: pneumatic up to 3 mm HF End trim saw 1st Top/Bottom trimming station 2nd Top/Bottom trimmimg station undercarriageedge magazine with: 1 -fold roller, edge thickness: 0.4 - 5 mm, workpiece thickness: 40 mm, workpiece pre heater: ✔, snipping unit: ✔, fine trimming unit: ✔, total power approx: 11 kW, packing measure approx (l x w x h): 4,000 x 1,800 x 1,600 mm, Approx. Onsite Dimension. (l x w x h): 3,600 x 1,400 x 1,200 mm, weight approx.: 690 kg

Description: Cross-cut saw unit : 1 motor / Flush trimming / Raidus trimming / Flat scraper blade Buffing unit Glue thickness max : 8 mm Thickness of roll material max : 3 mm Units synchronised : pneumatic Gluing height max : 50 mm Workpiece length min : 300 mm - Workpiece width min : 90 mm Feed rate max : 10 m/min Strip magazine : Yes Total connection : 12.6 kW ' Some of the technical data is taken from the manufacturer's brochure. Actual values may differ' Machine length : 4,300 mm Milling motors have slight bearing noises - tools must be changed - slight leakage at the DL cylinders. PRICED IN FUNCTIONALLY TESTED CONDITION , SOLD WITHOUT WARRANTY! Data is taken from the manufacturer's brochure/documents and may differ from the actual values. ATTENTION: It is expressly pointed out that this lot only corresponds to the scope of the lot description. , If the photo shows obje ...

Hebrock AKV3003DK-F edge banding machine with joints and two scraper blades. Edge thickness roll approx. 0.4 - 2mm Banding up to 8mm Workpiece height approx. 8 - 45mm Feed rate approx. 10m/min Noise protection hood Extendable workpiece support Suction connection 80 +140mm Aggregates: Manual overpressure adjustment with SIKO counter Infeed ruler manual adjustment with SIKO counter Edge thickness manual adjustment with SIKO counter Grooving mills with slide mills Gluing part with automatic edge retraction for rolls up to 3mm, switchable for synchronization and counter-rotation Pressure zone with 4 rollers Cross-cut saw Integrated collection container for edge pieces Combination milling unit, R2 with pneumatic adjustment between thin and thick edge Radius scraper R2, pneumatically retractable Glue joint scraper blade can be pneumatically inserted ...

Hebrock AKV3005DK-F edge banding machine with joints, corner copying and two scraper blades. Very neat machine from small business in excellent condition. Touch-screen interface with PLC control for easy operation of the machine, 12 operating programs can be saved. Edge thickness roll approx. 0.4 - 3mm Workpiece height approx. 8 - 53mm Feed rate approx. 10m/min Noise protection hood Extendable workpiece support, optional equipment extendable by 950mm Suction connection 80 +140mm Aggregates: Quick-change basin with glue outlet, there are two glue basins available, both of which are included in the scope of delivery (1 basin was used for EVA glue and one for PU glue), the PU glue basin is practically as good as new, was purchased only for one order. Manual overpressure adjustment with SIKO counter Infeed ruler manual adjustment with SIKO counter Edge thickness ma ...