compressors used for sale

Compressor always maintained by a professional with maintenance logbook, The inverter and motor are new It can be sold with its ATLAS CD 250 CE air dryer and OCS 355 oil separator Maximum working pressure: 7.5 bar Capacity: 125 l/s Rated power: 45 kW Rotational speed: 3000 rpm Compressor weight: 995 kg

Description Compressor type: Screw Max pressure: 10 Bar Flow rate: 186 m3/h Engine power: 22 Kw Motor controlled by inverter.

Sell set of 3 compressors with accessories; 1 ATLAS COPCO GA45VSD, Year: 2011 new inverter and motor Power and duration: 70537 1 KAESER CSD122, Year: 2009 Power & Time: 76940 1 KAESER CS 76, Year: 2002 Power & Time: 49624 + = 1 x OSC 355 Condensate Oil Separator 1 vertical atlas tank 1000L from 2016 in very good condition 1 horizontal atlas tank 1000L 1 ATLAS air dryer CD250CE The equipment was under maintenance contract and was always monitored and maintained by a specialized company

Description compressor type: piston max pressure: 10 BAR motor power: 4.1 kW complete with storage tank

Compressor in bob working condition, always monitored with maintenance book KAESER, CS, 76, 60 HP, ROTARY SCREW AIR COMPRESSOR, 160 PSI, 240 CFM, 460/3/60

Air compressor including compressed air dryer and oil trap with oil-water-separator. air compressor: - volume rate of flow: 8,02 m3/min - stage pressures: 13 bar g - suction pressure: 1 bar - installed motor capacity: 45 kW, Additional title: compressed air supply, Capacity: 8 m3/min, Stage pressures: 13 bar, Suction pressure: 1 bar, Drive: 4250 rpm, Power: 45 kW, Current: 97 A, Voltage: 400 V, Frequency: 50 Hz

Screw compressor, always maintained with maintenance and follow-up logbook.. . Type: Oil-injected screw compressor Year: 2009 Length (mm): 1650 Width (mm) : 1040 Height (mm) : 1865 Power (Kw) : 75 Pressure (bar): 8 Weight (kg) : 1330 Flow rate (M3/hour): 732

wisAIR oil-free air compressor including compressed air dryer and air filter. air compressor: - max. allowable working pressure: 13 bar - capacity: 146,5 l/s - motor power: 55 kW, Additional title: oil-free screw compressor, Capacity: 146 l/s, Max. working pressure: 13 bar, Motor drive: 5200 rpm, Power: 55 kW, Voltage: 400 V, Frequency: 50 Hz, Weight: 1195 kg

Inv. Num. : 6939 Type: S132 Producer: Ingersoll Rand Created: 2017 Parameters: Capacity:: 31500 l/min Operating pressure: 8.5 bar Speed: 2995 1/min Machine weight: 3400 kg Equipment: Compressed air dryer Ventilation

oil-free compressor, Additional title: oil-free screw compressor, Capacity: 1 m³/min, Working pressure: 8 kg/cm² = 7,8 bar, Max. pressure: 10 kg/cm² = 9,8 bar, Power: 22 kW, Voltage: 400 V, Frequency: 50 Hz/FU, Length: 1100 mm, Width: 1600 mm, Height: 1471 mm, Weight: 640 kg, Features: Swan-air compressor Type SDU-415N with 4 cylinders; MTA air dryer Type DEiT018

Inv. Num. : 6428 Type: ST 45 Produzent: ATMOS Erzeugt: 2021 Parametern: Einschaltstunden: 461 h Betriebsstunden: 78 h Drehzahl: 3600 1/min Motor: 45 kW Ausstattung: Der Luftschacht Entwässerungsfilter

Compressed air system with air compressor, refrigeration dryer, activated carbon filter and two compressed air tanks., Capacity: 202 m3/h, Operating pressure: 10 bar, Features: Air compressor; refrigeration dryer; activated carbon filter; 2 x compressed air tanks.

Inv. Num. : 6505 Type: UNIGY 11kW-8 Producer: Ingersoll-Rand Created: 2004 Parameters: Total power: 11 kW Max pressure: 22 bar Maximum temperature: 60 C Machine weight: 46 kg Equipment: Compressed air dryers

Complete compressed air system Aircenter SM13 with refrigerant dryer and a compressed air vessel. The Sigma Control 2 unit coordinates compressed air generation and consumption., Additional title: compressed air supply system, Operating hours: 2169, Flow: 1 cbm/min, Operating pressure: 8 bar, Compressed air vessel volume: 270 l, Power: 7,5 kW, Frequency: 50 Hz, Weight: 440 kg, Operation / Control: Operating terminal / Sigma Control 2, Base construction: screw compressor, mounted on frame, Features: compressed air vessel; refrigeration dryer; coalescence filter KE; activated carbon adsorber ACT 12; dust filter KD; coalescence filter KE

SOLLANT SLT 15 rotary screw compressor built in China in 2021 is a versatile device designed to deliver the highest quality compressed air. The compressor’s special modular design features a small number of parts and connectors, ensuring efficient and uninterrupted operation even during the most demanding industrial applications. The SOLLANT SLT 15 rotary screw compressor also features an integrated SOLLANT LGA-2.6 refrigeration dryer, which continuously removes moisture and water vapour from the compressed air, minimising the risk of corrosion. All key operating parameters are continuously monitored by a MAM-880 controller with electronic display and sensors. The total weight of the machine is 550 kg. Technical specifications of the SOLLANT SLT 15 compressor - power: 15 kW - maximum operating pressure: 1 MPa (10 bar) - capacity: 2.1 m3/min - drive type: direct drive - refri ...

Additional title: oil-free scroll compressor, Volume flow at 7,75 bar: 1 m³/min , Volume flow at 4 bar: 1 m³/min, Power: 12,9 kW, Voltage: 400 V, Frequency: 50 Hz, Length: 953 mm, Width: 1207 mm, Height: 1660 mm, Weight: 520 kg, Features: with integrated refrigerant dryer, frequency controlled

WORTHINGTON CREYSSENSAC RLR 20 CE rotary screw compressor was built in Italy in 2022. The easy-to-maintain compressor with innovative technology provides users with high-quality compressed air at low operating costs. The motor, inverter and other machine components are cooled by a separate airflow with a low operating temperature, and the use of direct-drive gearbox ensures high energy efficiency and operational reliability. The ROLLAIR 20 screw compressor has a capacity of 137 m3/h at a maximum operating pressure of 10 bar. The compressor’s internal water separator with automatic drain and DS13 refrigeration dryer immediately remove moisture from the compressed air, guaranteeing long and trouble-free machine operation. A state-of-the-art Airlogic² controller enables operation with different pressure ranges and allows continuous monitoring of key operating parameters. The total wei ...

AIRPOL K7 rotary screw compressor was built in Poland in 2015. The versatile device driven by belt transmission, provides the user with the highest quality compressed air and ensures uninterrupted operation even during heavy loads. All this is ensured by the compressor’s cooperation with a reliable MARK OP 20 (A3) refrigeration dryer, which removes moisture and water vapour from the compressed air to minimise the risk of corrosion. Combined with efficient ventilation and an oil separation system, the compressed air is also characterised by a very low oil concentration and a slightly higher temperature than ambient. AIRPOL screw compressor together with the dryer weighs a total of 395 kg. Technical data of the AIRPOL K7 compressor - working pressure: 10 bar - engine power: 7.5 kW - capacity: 57 m3/h - refrigeration dryer pressure dew point: +3°C - cooling air requirement: 1200  ...

Pressure: 8 bar Motor: 11 kW Free air delivery: 1,74 m³/min Measurement (WxHxD): 722 x 1555 x 1080 Weight: 424 kg Compressed air connection: 1

COMPAIR L11-7.5A screw compressor was built in 2014 in Italy. The compact oil-injected screw compressor with a capacity of 1820 l/min at an operating pressure of 7.5 bar delivers high-quality compressed air at low operating costs. All key operating parameters are continuously monitored by the state-of-the-art DELCOS PRO control, guaranteeing continuous and reliable operation throughout its service life. The screw compressor is additionally equipped with, among others, a refrigeration dryer, an oil separator and a 500 litre KOMNINO KPL-500/L-13 tank. The total weight of the machine is 219 kg. Technical specifications of the COMPAIR L11-7.5A compressor - capacity at maximum working pressure: 1820 l/min (1.82 m3/min) - maximum working pressure: 7.5 bar - suction pressure: 1 bar - motor speed: 3000 rpm - operating hours: 26399 h - operating hours under load: 4346 h - tank capacity: ...

Pressure: 8 bar Motor: 11 kW Free air delivery: 1,74 m³/min Measurement (WxHxD): 1072 x 1555 x 1080 Weight: 524 kg Compressed air connection: 1

Compressor AIRPOL 15 manufactured in 2008. Technical data : - capacity: 120 m3 - overpressure: 10 bar - engine speed: 3000 / min - engine power: 15 kW - dimensions (length x width x height): 1100 x 650 x 1180 mm - weight: 340 kg

Pressure: 10 bar Motor: 11 kW Free air delivery: 1,76 m³/min Measurement (WxHxD): 1610 x 1380 x 915 Weight: 505 kg Compressed air connection: 1

The WALTER SF 37 KS screw compressor was manufactured in 2014 by the WALTER Kompressortechnik brand. The freestanding screw compressor has direct drive and built-in inverter. The compressor is offered as a set with a 3000 dm3 vertical expansion tank and WDFC 396 refrigeration dryer, with an integrated control panel and a built-in filter 1 and 0.01 u. Technical parameters of the screw compressor: - pressure: 10 bar - capacity: 5.8 m3 / min - power: 37 kW - connection: R 1 1/4 " - volume: 71 db (A) - weight: 715 kg - length: 1575 mm - width: 1030 mm - height: 1750 mm Technical data of the refrigeration dryer: - capacity: 396 m3 / h - capacity: 6.6 m3 / min - connection: 2 " - voltage: 230/1/50 V - refrigerant: R134.a - pressure drop: 120 mbar - working pressure: 16 - built-in 2 micron filters: 1 and 0.01 - dehumidifier weight: 120 kg - length: 750 mm - width: 700  ...

Pressure: 10 bar Motor: 22 kW Free air delivery: 3,21 m³/min Measurement (WxHxD): 1072 x 1735 x 1056 Weight: 561 kg Compressed air connection: 1

Compressor system consisting of two compressors Elektra + Boge which are connected together: 1. Boge Type S R 1830-45 No. 273287 from 1982 Maximum operating pressure 10 bar Displacement 1830l/min Speed 950 rpm. 2. Elektra compressor with accumulator Type LP1000/11/500 Factory No. 3114 Year of manufacture 1974, operating pressure 11 bar, Boiler capacity 500ltr., suction capacity 1000ltr./min. Flow rate 710ltr./min. Compressor speed 1360 rpm. Power requirement 10 hp Attention: two pressure gauges on the container are damaged/transport damage The plant is in a technically good condition and was dismantled and dismantled and removed during a company relocation and is no longer needed. This system was used for the use of several air nailers for pallet production. Transportation is done by buyer. Sale only without guarantee and warranty Changes and errors in technical  ...

Pressure: 13 bar Motor: 18,5 kW Free air delivery: 2,32 m³/min Measurement (WxHxD): 1610 x 1380 x 915 Weight: 550 kg Compressed air connection: 1

REF-2357 WORTHINGTON CREYSSENSAC ROTARY-SCREW AIR COMPRESSOR Rotary-screw air compressor. Manufacturer: Worthington Creyssensac. Brand: ROLLAIR. Model: ROLLAIR 75. Compressor: - Rated power: 55kW/75HP - Refrigerated air volume: 9,000m3/h - Sound level: ± 70dB - Weight: ± 1,400kg - Compressed air outlet Ø: 2” - Operating pressure: 12.5 bar Compressor motor: - Manufacturer: LEROY SOMER - Model: AP180LGU-T - Power: 55kW/75HP - 2,945 Rpm - 400V/100A Complete with instruction manual.

Pressure: 10 bar Motor: 30 kW Voltage: 400 Volt / 50 Hz Free air delivery: 4,1 m³/min Measurement (WxHxD): 1350 x 1585 x 900 Weight: 590 kg Compressed air connection: 1 1/4