We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Description: Working size 20 - 100/105 mm - General conditions: the peeling head has been completely overhauled / according to the attached images, the system has been completely checked/cleaned. The plant has been completely checked/cleaned / the entry rollers are present but need to be checked/adjusted accordingly / the roller table in the exit area needs to be replaced. - Important note: the plant is equipped with a chip transport system. PLANT DISMANTLED WITHOUT DOCUMENTS For transport, the following are required: 4 hydraulic jacksweight approx.: 18,000 kg, Approx. Onsite Dimension. (l x w x h): 15,000 x 6,000 x 3,000 mm
used
○CNC CINCOM SYSTEM FS-32iB ○capacity - work piece 最大加工径 φ20mm 最大加工長 200mm 正面最大穴明け径 φ10mm 最大タップ M8 背面最大穴明け φ8mm 最大タップ M6 ○ Main Axis 正面主軸回転数 10000rpm 背面主軸回転数 8000rpm ( rare end ) ○ATC 21 tools くし刃 旋削5本+milling 4 tools 正面穴明け 4本 背面穴明け 8本 ○motor 主軸用 2.2/3.7kw 背面用 1.1/1.5kw ○機械の大きさ 寸法 幅2540mm+チップコン719mm×奥行1185mm×高さ2 152mm 重量 2200kg ○Bar feeder オートバー Alps ASR X-20ZCⅡ length 3.0m
used
Matching bar feeder DMG S Loader, year of construction 2010 unused, lateral sliding device. ( original price at that time 18000,- EUR) Bought for a Guildmaster CTX 310 but never used it.
used
Description: CNC lathe with feeder Control Mazatrol CAM t-2 Chuck Ø 200 mm Alarm on x-axisweight approx.: 11,000 kg, Approx. Onsite Dimension. (l x w x h): 4,100 x 1,800 x 2,200 mm
used
Year of construction: 2002 CNC controller: FANUC 18iTA Capacity X-axis travel mm: 565 Y-axis travel mm: ±80 Z-axis travel mm: 1.077 Turning length mm: 1.020 Max. turning diameter mm: ø 550 Swing over cross-slide mm: 599.4 Tool magazine Magazine places: 120 Tool length max. mm: 280 Tool diameter max. mm: 90-120 Tool weight max kg: 7 Upper turret Number of tool slots St .: 1 Speed driven tools RPM: 8.000 Lower turret Number of tool slots St .: 12 Speed driven tools RPM: 4.000 Indexing time s: 0.26 Main spindle Speed spindle rpm: 4.500 Drive power spindle kW: 22/15 Spindle bore mm: 73 Chuck type: Hollow Chuck (8") Manufacturer: KITAGAWA Spindle nose: JIS A2-6 Counter spindle Speed spindle rpm: 6.000 Drive power spindle kW: 15/11 Spindle bore mm: 56 Chuck type: Hollow Chuck (6") Ma ...
used
Designation: Bar feeder Manufacturer: SAMECA Type: Quick Sam 45 Year of construction 1996 Condition: used, functional Delivery: ex site, including truck loading Operating instructions are available
used
Curve Controlled Turret Bar Automatic Turning Machine max bar passage 26 mm max. speed 4750 rpm 6-fold star turret max. stroke of the turret slide 80 mm Coolant device Gearbox 2 Double Vertical Support 2 side supports with steel brackets - Reverse machining driven - Oil protection cover - Bar weight feed
used
TRAUB Sonim TND 200 CNC Lathe YOM 1994 CNC Lathe – Inclined Bed Type TRAUB TX8F CNC control Turning diameter 350 mm Turning length 200 mm Total power requirement 20 kW Turning diameter over bed slide 200 mm X-axis 180 mm Z-axis 300 mm Spindle bore 42 mm Spindle motor 12 kW Spindle turning speed range 10 – 5000 rpm Feed speed X:155, Z:250 mm/min Rapid Travel Speed X-Axis 15 m/min Rapid Travel Speed Z-Axis 25 m/min Weight of the machine ca. 4 t Dimensions of the machine ca. 6.5 × 1.5 × 1.75 m 12-fold revolving head Traub Bar loader 3-fold power chuck Chip conveyer
used
Description: CNC LATHE Serial number : 023822 Tong-tai CNC FANUC Year of manufacture : 2008 Maximum turning length: 1500 mm Bar capacity: 75 mm Chuck size : 254 mm Spindle nose : A2-8 Bar Pitch : 87 mm Maximum spindle speed : 4500 r.p.m. 12-position tool changer X-axis travel : 245 mm Z-axis travel : 1600 mm FAST X AXIS : 18 m/min FAST Z AXIS : 20 m/min Distance between points : 760 mm Hours according to counter : 5008 h Auto bar feeder FEDEK , Model : SN - 55152 Year of manufacture : 2008 Serial number : 15353905 Double dimension bar passage : 36 mm and 52 mm (see photo) , Dimensions : 3800 x 700 x 1300 mm Engine: 1450 W Tailstock, additional plate, tools included (see photos)weight approx.: 9,000 kg, Approx. Onsite Dimension. (l x w x h): 2,760 x 2,000 x 3,000 mm
used
Code 93024 Description Chucking lathe Make Warner & Swaswy Model 0 - AC Serial No. 2083651 Year 1972 Swing over bed 200 mm Swing over gap 200 mm Swing over crossslide 200 mm Spindle bore --- mm Longitude: 140 mm Cross: 100 mm Chuck : 160 mm Bore: 20 mm Number of spindle speeds 32 Spindle speeds 58 - 2507 rpm Feeds Longitude and cross Motor power 5,5 kW – 380 Volts Accessoiries hydraulic 3 chuck coolant Condition Machine is in good condition.