Seller: Innovac GmbH
Nominal power: 400kVA, rotational speed: 1500/min, weight: 1.27t.
Seller: Innovac GmbH
Two identical machines are available, power 1/2: 5000/9000VA, speed: 1800/3150/min, length: 700mm, width: 440mm, height: 580mm, weight: 126kg, with documentation, the generators are unused.
Seller: Innovac GmbH
A Siemens rotary converter (pendulum machine) is available. Generator operation: max. voltage: 600V, max. current: 343A, speed: 6000rpm, power consumption: 220kW. Motor operation: max. voltage: 520V, max. current: 315A, speed: 5000rpm, power output: 148kW.
Seller: Innovac GmbH
Three identical Atmos generators are available. Rated output: 500kVA, rated voltage: 400V, rated current: 722A, power factor: 0.8, internal/external tank volume: 2000l/2300l, residual diesel: approx. 1000l per generator, weight: approx. 5600kg, control system: ComAp InteliCompact. Generator dimensions X/Y/Z: approx. 4500mm/1450mm/2600mm, external container dimensions X/Y/Z: approx. 2800mm/1800mm/2700mm, operating hours: Generator 1: 35h, Generator 2: 292h, Generator 3: 271h. Documentation available. On-site inspection is possible.
Seller: Innovac GmbH
Drive rotational speed: 1.9/min, torque: 2300Nm, Anschlussleistung: 1,1kW.
Seller: Innovac GmbH
There are 26 motors available.
Seller: Innovac GmbH
Ambient temperature: 0°C/+40°C, max. altitude over sea level: 1000m, rated voltage: 6kV/50Hz, rated speed: 1500rpm, rated power: 14MW (14000kW), design: B3 (floor-mounted), protection class: IP54, efficiency: over 95%, cooling system: air-water cooling, operating mode: continuous operation, starting method: direct starting, direction of rotation: bidirectional, insulation class: F (B), weight: approx. 25500kg. Including DC excitation, external lubrication unit, 6x RTD in stator windings and anti-condensation heating. Documentation available. On-site inspection is possible. The machine is as good as new and is in its original packaging.
Seller: Innovac GmbH
There are one Electric Motor AC ACM 160MB-2/HE and two ASEA IEC 34-1 available.
Seller: Innovac GmbH
Power: 22/25,3kW, rotational speed: 1470/min, weight: 185kg, the motor was never used.
Seller: Innovac GmbH
Three identical VEM three-phase high-voltage asynchronous motors are available. Rated power: 8.5MW (8500kW), voltage: 6000V, frequency: 50Hz, speed: 1500rpm, protection class: IP55, cooling: water, insulation class: F, bearings: roller bearings, vibration class: A, weight: approx. 30000kg. Including an oil lubrication unit overhauled in 2019 and 2x exciter cabinets. Documentation available. On-site inspection is possible.
Seller: Innovac GmbH
Voltage: 460V, Torque: 1161Nm, Power: 500kW, Speed: 2300rpm, Insulation class: H, Operating mode: Continuous operation (S1), Protection class: IP 23 S, Ventilation: IC 06, Shaft diameter: 95mm, Machine dimensions X/Y/Z: approx. 1350mm/550mm/550mm. On-site inspection is possible.
Seller: Innovac GmbH
A complete system consisting of generator, turbine, gearbox, housing, exhaust gas duct and stack is available. 1) Gas turbine: Nominal output at ISO conditions: 1850kWe, fuel: natural gas, calorific value (LHV): 38.8MJ/kg, mass flow rate: 8.7kg/s, max. exhaust gas temperature: 571°C, max. exhaust gas flow: 221kg/s, turbine speed: 26000rpm, operating hours: approx. 20000h. 2) Generator: Type: Synchronous generator LSA 53 VL80/4p, rated power: 2316kVA/10.5kV, 127A, speed: 1500rpm. 3) Gearbox: Type: 2-stage planetary system GB24-1500, transmission ratio: 6.7:1, weight: approx. 350kg. Total system operating hours: 81269h. Documentation available. On-site inspection is possible.
Seller: Innovac GmbH
Three identical ABB electric motors are available. Voltage supply: 380V-690V, motor type: three-phase motor, switching frequency: 2kHz, max. overload time: 10s, cooling time: 10min. PTC sensor included. Documentation available. On-site inspection is possible.
Seller: Innovac GmbH
Max. steam output: 250kg/h, including documentation.
Seller: Innovac GmbH
With Burner W. Oertli AR-4.
Seller: Innovac GmbH
Nominal heating power: 80kW, length: 710mm, width: 1805mm, height: 1072mm.
Seller: Innovac GmbH
Nominal oil/gas output: 460kW, max. rated power input: 1000W, were maintained regularly.
Seller: Innovac GmbH
Operating pressure: 1 bar, volume: 790 kg, output: 800 kg/h, heating surface: approx. 6 m².
Seller: Innovac GmbH
A Bosch steam boiler with Weishaupt oil burner is available. 1) Bosch ECO 1, year of manufacture: 2021, volume: 51l, max. permissible pressure: 31bar, test pressure: 51bar, max. temperature: 238°C, heat output: 87kW. 2) Bosch UL-S 2000, year of manufacture: 2021, volume: 3315l, max. permissible pressure: 13bar, test pressure: 24.7bar, max. temperature: 195°C, steam output: 2000kg/h. 3) Weishaupt WM-L20, year of manufacture: 2021, oil output min./max.: 275kW/2000kW, heating oil pressure: 30bar. Including Siemens Simatic HMI control, water treatment, economizer and attachments. Documentation available.
Seller: Innovac GmbH
Output at 45 PSIG: 440kg/h, max. pressure: 8bar, max. temperature: 121°C, material: stainless steel, steam: sterile, machine dimensions X/Y/Z: approx. 1200mm/800mm/2850mm. On-site inspection is possible.
