lacquer machines used for sale

Drying Varnishing Trolley 20/2X Arm length 780mm Distance between arms 120mm Min/Max material length 300/2650 mm Number of arms 19

A complete paint shop is available. 1) Sergiani S.p.A. Monomatic S, year of construction: 2001. 2) Finnrose FLT 6, year of construction: 1993. 3,4,5) Three identical Bürkle DAL1-1300 presses, year of construction: 1993. 6) Karl Heesemann FGA 6 EX, year of construction: 1993. 7) Finnrose FLT-4.5, year of construction: 1993. 8) Bürkle DAL2-1300, year of construction: 1985. Hackemack KTR 2040, year of construction: 1996. All machines are part of a paint shop. On-site inspection is possible.

Lifting device control MRC 2 220 - 240 VAC 50 Hz 3000 VA Lifting device control comes from operating resolution . Spare parts, filters, powder guns, wear parts in stock. Tel. 05242 / 43186 email info@pradler.com Filter cell Gema ITW 592 x 592 x 292 mm from operating resolution in stock Filter cartridge D = 327 x 605 mm for Wagner etc. in stock TS Residual filter D = 115 mm x 605 mm please enquiries / many pos. at the camp Mfg. Pradler Machine Service Tel. 05242 / 43186

Glue spreader with 4 roller Brand: Omma Type: GS Technical data: Working width: 1.360 mm Max throughfeed height 80 mm Speed: 16,5 m/min. Working height: 905 mm Diameter of application rolls: 200 mm Diameter of metering rolls: 185 mm Connected value 1,3 kW Colour RAL 7035 Operation side left Electric 400/50/3 Technical equipment: - Each 1 drive motor for the upper and lower spreading unit for highest precision and to get a low-noise vibrational free run. - Rubber coated application roller with sanded surface - Hard rubber coated dosing rollers with sanded surface - Display for height adjustment of application rollers, precision: 1/10 mm - Manual adjustment of dosing rollers depends on the application rollers for an even glue application - Special tighted bearing to prevent sluggishness, blockages and overheating. - Safety grid as a safety device at mach ...

Control station Gema / ITW until the relocation of the plant 2009 the plant was maintained by ITW Gema, all units in the top state. 6 times unit static pistols 100 KV 2 times unit lifting device control for up to 4 pistols. Steering position and images to be followed by lifting devices as well as automatic pistols. If you have any questions, please, to the technology. In operation, handling .etc. of course I like to advise . Please send a short info to my AB with tel. I will contact you immediately . Mfg. Pradler Machine Service 05242 / 43186 Mobile 0171 / 4513691 email: info@pradler.com

Glue application machine Make: OMMA Type: FSC-1.300 for water-based glues working width: 1.260 mm maximum working thickness: 90 mm working speed: 19 m/min. height of working level: 905 mm application rolls Ø: 185 mm standard grooving lines: 14 inch installed power: 0,5 kW colour: RAL 7035 command side (compared to working direction) right standard voltage: 400 V/50 cycles /3 ph. technical equipment: - rubbered application rolls, coated with grinded surface - thickness graduate indicator - top & bottom glue dosing tanks in grinded steel with ground profile and micrometric glue regulation - parallelism regulation between application rollers - rollers protection with security plate and foot control in front of the machine that stops immediately the machine if activate - security front foot barrier - steel zinc collecting tank of the cleaning water - electr ...

High voltage unit EPE 726 , Gema high voltage unit for two powder guns 100 KV , plug-in adjustable high voltage , dosing air and conveying air Switchable Pistol 1 / Pistol 2 / Pistol 1 + 2 Insert from maintenance general overhauled. Powder guns , spare parts in stock Tel.05242 / 43186 email: info@pradler Filter cells for Gema 592 x 592 x 292 mm 298.00 € per pc net see pictures . ! Prices Net excluding MWsT. Mfg Pradler Machine Service Tel. 05242 / 43186 email: info@pradler

Infrared drying system Schiele IR dryer (HIR stationary dryer) Including approx. 20 trolleys for quick drying of workpieces on trolleys with infrared radiators and blowers. Special price from location for self-dismantling and self-collection., Hordes: approx. 20 pieces, length: 7.000 mm, width: 2.500 mm, Technical specifications: See PDF

Automatic Spraying Machine / Surface Spraying Machine Workpiece transport: Vacuum conveyor belt with paper loading 4 x Spray Guns 4 x Paint Pumps

Housing parts made of stainless steel, timer, fresh rinsing nozzle---------- Technical Data ----------Dimensions (LxWxH): 670 x 510 x 370 mm, compressed air: 6 barSold as is, without technical inspection

Dry Suction Wall Paint mist extraction wall Impact surface 2250 mm x 2250 mm Height with fan 2900 mm Fan approx. 1.5 kW Weight with pallet approx. 300 kg Loading dimensions approx. 2900 mm x 850 mm x H 2500 mm

Manufacturer: Giardina, Type: MCD, Year: 1992, Work piece width min-max mm: 80 - 240, Min.-max. workpiece height in mm: 80 - 240, Feeding speed m/min: 15 - 50, Electrical power consumption kW: 48, FREE TEXT: 6 UV Röhren - 30 KW, Year :1992

Automatic painting machine – Cattinair Rotoclean spraying machine Type: Roto-G Year of construction: 1998 Working width 1300 mm Left side Steel belt transport system Circular rotor with 8 spray guns 2 color wheels for solvent-based paints and water-based paints Paint cleaning or paint recovery incl. 1 paint pump in working order

Universal roller applicator Hymmen Type: ULX/ULX-B Komm.Nr. 36925 Machine No. 150243 Year of construction: 1979 Working width 1300 mm Roll length 1300 mm Passage height 3 – 80 mm with metal dosing roller diameter 175 mm Application roller foam rubber diameter approx. 235 mm, 25 Shore 3 relocating, driven. Brush rollers L 1300 mm, diam. 150 mm Working height-table height 1040 mm Feed speed 8 – 40 m/min. Operation page on the left with paint pump and return basin with 1 spare brush roller L 1300 mm, diameter 150 mm with 1 spare rubberized application roller, L 1300 mm, Diameter approx. 255 mm, 70 Shore with 1 cleaning tray made of sheet metal for the brush rollers Material transport via conveyor belt on the table Transport belt width 1200 mm With emergency stop ripcord Complete machine stands on wheels was used for the application of oil and wax Machine ...

Manufacturer: Kremlin, Type: 16-120 F, Transmission ratio: 16 : 1, Compressed air bar max: 96, Förderleistung l/min: 6, Druckluft max bar: 6, FREE TEXT: geprüft,

High pressure pump / Airless paint sprayer With high flow rate, ideal as a feed pump for airless sprayers (united for medium and low viscosity coating materials) Material guide in stainless steel (suitable for water-based paints) Gear ratio: 42:1 Air inlet pressure max. 8 bar Flow rate per double stroke 235 cm3 Flow rate max. 38 l/min. Maximum permissible operating pressure 335 bar Piston diameter of the air motor 230 mm Piston stroke of the air motor 120 mm

Manufacturer: Giardina, Type: G 84/20, Year: 1994, Control: yes, Brush type: gekordelt, Diameter of brushes: 150, Compressed air cleaning: yes, Number of units: 2, kW Leistung Motoren: ca.2, Number of rotations controlled: yes, Fast exchange device: no, Working width mm: 1400, Through running hight mm: 150, Vacuum belt: no, Feeding speed continous adjustable: yes, Feeding speed min-max m/min: 7-21, kW-Vorschub: ca.1,5, Operating side: rechts, Product detection: no, Electrical hight adjustment: yes, rotor jets: yes, Year :1994

WIWA High Pressure Pump 235.42R / 38042, YOC 2000 With high flow rate, ideal as a feed pump for airless sprayers (united for medium and low viscosity coating materials) Material guide in stainless steel (suitable for water-based paints) Gear ratio: 42:1 Air inlet pressure max. 8 bar Flow rate per double stroke 235 cm3 Flow rate max. 38 l/min. Maximum permissible operating pressure 335 bar Piston diameter of the air motor 230 mm Piston stroke of the air motor 120 mm

Manufacturer: Costa Inert Trocknung, Type: C X C 1350, Year: 2011, Work piece width min-max mm: 50-1350, Min.-max. workpiece height in mm: 3-120, Working widht max mm: 1300, Number of lamps: 1, kW power 1 lamp: 10, Gesamtlänge UV Modul mm: 1300, Lamps straight installation: yes, Adjustable: yes, Elektronische Leistungregelung: yes, Position of lamps: gerade, Power per lamp watt UV: 60-120, Feeding speed m/min: 5-20, Conveyor: Band, Exhaust air diameter mm: yes, Feedin speed m/min: 6-25, Belt conveyor: yes, Year :2011

SPECIFICATIONS: Working width: 5,000 mm Lamellar profile structure with collection container Double condensation veil Complete with: - Temperature display - 2 RL502 extractors with 2.2 KW

Manufacturer: Purete, Type: PRT-U4113e, Year: neu, Work piece width min-max mm: 1.320, Min.-max. workpiece length in mm: 300, Min.-max. workpiece height in mm: 2 - 80, Number of lamps: 4, kW power 1 lamp: 17, kW power all lamps: 73, Lampenlänge mm: 1.478, Reflektor von oben abnehmbar: zur Bedienseite, Gesamtlänge UV Modul mm: 1.850, Lamps straight installation: yes, Lamps from below: no, Strahlereinheit UVM: yes, Adjustable: yes, Elektronische Leistungregelung: yes, Automatische Werkstückerkennung : yes, Automatischer Hochlauf der Lampe bei Einlauf Werkstück: yes, Power per lamp watt UV: 120, Abluftmenge cbm/h: 4 x 1.200, Leistung Abluftventilator kw: 0,5, Conveyor lenght mm: 2.940, Tragstangendurchmesser mm: 25, od distance mm: 38, Conveyor lenght mm: 2.940, Chain pitch mm: 35, Feeding speed m/min: 5 - 25, Conveyor: Stange, Drive power kW: 0,75, Exhaust air diameter mm: 200, Rod tr ...

Paint mist extraction mobile with 3 meters flexible slauch

Manufacturer: Hymmen Lackauftagswalze, Bürkle: yes, Rubber coating length cm: 1398, Shore Härte: 45, Approx. thickness of rubber coating in mm: 20, Sponge rubber: yes,

Ceetec's new A250 paint machine is here! As an official and exclusive sales partner for the German-speaking region, I am pleased to present our latest model to you. After almost 50 years of construction of the previous model since the beginning of the 1970s (better known as the GORI brush machine), the new model is now an extensive update with extended applications. Who is this machine suitable for? - Carpentry /carpentry that manufactures carports, facades, terraces, garden houses, etc. - Wood industry companies that paint, read or impregnate industrial boards / beams / slabs etc. Technical data: max. workpiece height: 250mm max. workpiece width: 250mm (or 380mm = Ceetec A380) Speed: 16-42m/min Connection: 400V / 1.5kw Benefits ggü. simple spray painting: 1. The wood protection is massaged evenly into all pores, which ensures a high resistance. 2. Different su ...

Manufacturer: Rippert, Type: Düsentrockner, Work piece width min-max mm: 1300, Channel length in mm: 14000, Revisionsklappen: yes, Gehäuse Wärmeisoliert mm: yes, Kanaltemperatur Grad: max.80, Ex geschützt: yes, Gesamthöhe mm : 2500, Temperature regulation: yes, Druckdifferrenzschalter: yes, Min.-max. workpiece height in mm: 10-80, Working widht max mm: 1300, Working height in mm: +/-950, Conveyor lenght mm: 14500, Through running hight mm: 100, Feedin speed m/min: 5-15, Belt conveyor: yes, Air speed in jets: ca.20, Round nozzle: yes, Heated by: Warmwasser, Damper register - items: 1, 1st Damper register kW: ca.70,

As the exclusive sales partner of Ceetec A/S for the German-speaking region, I am pleased to introduce you to our P40 coating machines. The operating principle is very simple: In the front area, the workpiece is flooded all around with lacquer material (lacquer/glaze/impregnation/oil) and in the rear area 3 counter-running brushes pull off the excess material and massage it into the pores at the same time, so that the wood protection is optimally applied. A feed pulls the workpiece (length from 800mm) through the machine at 25m/min. For an extra charge, we offer you a suitable roller conveyor set. They can be firmly connected to the machine. In the outlet, disc rollers are used, which leave only barely visible traces on the back (the paint material used arrives). To make the purchase of your new brush machine a complete success for you, we offer the following services: � ...

Manufacturer: IST, Type: AL-140-4-N-DL, Year: ca. 1992, Number of lamps: 1, Power per lamp watt UV: 80 W/cm, Working widht mm: 1400, Working widht mm: 1400, Conveyor lenght mm: 2500, Rod transportation: yes, Required space L x W x H mm: 2.500 X2.500X1.700, Wight approx. kg: ca. 500, Year :ca. 1992

I am selling a heating air drying tunnel BURKLE Model: Easy Dry JET 1300 Filter: TRDUE / 700 m3/h Fan 7,5kW / 6800m3/h / 35 m/s Working width 1400mm Overall length 6.00m Electrical connection 36.5kW Heating air system 12 bladder units Heating medium water up to 80°C Max. heating capacity 45 kW Max. temperature of heating surfaces 120°C Siemens Simatic Touch Control Panel Year of construction 2014. System NEW, already not used ! Available soon.