Seller: Innovac GmbH
Includes aggregate weigher, cement weigher, water weigher, additive weigher, special material weigher, Schlossermixer and Biotronik control system, documentation available, on-site inspection is possible.
Seller: Innovac GmbH
An automatic valve bag filling system for cement bags Rotopacker is available. Packaging capacity: 2400 bags/h, number of filling stations: 8, filling station type: spouts, cylinder: Festo pneumatic cylinder, cylinder stroke: 150mm. Documentation available. On-site inspection is possible.
Seller: Innovac GmbH
Power: 290kW, Fuel: Diesel, TÜV: until 07.2025, Payload: 18775kg, Wheelbase: 4250mm, Displacement: 10700cm³, Rated torque: 1900rpm. Machine dimensions X/Y/Z: approx. 6200mm/2500mm/3300mm, weight: approx. 32000kg, mileage: 49873km. Documentation available. On-site inspection is possible.
Seller: Innovac GmbH
Scraper capacity 20m: 108m³/h, outreach: 20m, boom angle of attack: 15°, slewing radius: 2080mm, clearing bucket width: 1170mm, volume: 1050l, steep angle: 320°, max. tractive force: 62kN, max. load torque: 322kNm, connected load: 47kW. Machine dimensions X/Y/Z: approx. 3200mm/2150mm/2350mm, weight: approx. 4600kg. On-site inspection is possible.
Seller: Innovac GmbH
With articulated carrier DC26, load: 108kW, max. driving speed 16km/h, tyre size: 14.00 R24 A, 2x drill arm BUT 35, Diesel Power Generator Deutz BF4M 1013C, drill mounts BMH 6414, max. drill rod length: 4321mm, max. drilling depth: 4020mm, loading platform HL 210, CE standard, air/water flushing, heat exchanger and high-pressure pump Swellex, without drill hammers.
Seller: Innovac GmbH
Motor power: 179kW, length: 9655mm, width: 2490mm, height: 2630mm, weight: 18.7t, with documentation.
Seller: Innovac GmbH
Engine: CAT 3054 DI-T(EPA), power/speed: 78.5kW(107hp)/2300rpm, max. power: 80.5kW (110hp), diesel tank capacity: 160l. Hydraulic system: Hydraulic pumps: 1) circuit: 92l/min, 2) circuit: 73.6l/min, 3) circuit: 18.4l/min, 4) circuit: 8l/min, system pressure: 250bar, hydraulic tank capacity: 350l. Crawler chassis: type: B1, tractive force: 75kN, travel speed: 2.2km/h, specific ground pressure: 5.3N/cm², total width: 2200mm, length of crawler tracks: 1900mm, ground clearance: 390mm, oscillation possibility: +18°/-8°. Drilling equipment: permissible torque: 20kNm, total length: 5765mm, feed length: 4300mm, max. boom length: 4000mm, feed force: 40kN, retraction force: 60kN, feed speed: 9m/min, retraction speed: 9m/min, fast feed: 47m/min, fast retraction: 47m/min. Transport dimensions X/Y/Z: 6470mm/2200mm/2560mm, weight: 8500kg. Documentation available.
Seller: Innovac GmbH
Load capacity: 227kg, max. tilt angle: 3.5°, max. wind speed: 9.4m/s, platform height: 5800mm, operating pressure: 207bar, max. tire load: 570kg, weight: 1312kg. The battery is defective and the machine cannot be moved for long. Replacing the battery will probably solve the problem. Documentation available.
Seller: Innovac GmbH
Wire diameter (single wire): 6mm-14mm, wire diameter (double wire): 6mm-10mm, maximum bending angle: 180°, motor power: 22kW, feed rate: 1.5m/s, bending speed: 1000°/s, cutting time: 0.4s, hydraulic tank volume: 300l. Machine dimensions X/Y/Z: approx. 4900mm/1640mm/2200mm, weight: approx. 3300kg. Control system defective. Documentation available. On-site inspection is possible.
Seller: Innovac GmbH
Power: 403kW, max. drilling depth: 108m, max. drilling diameter: 311mm, chassis: crawler chassis, dimensions X/Y/Z: approx. 10500mm/2500mm/3800, weight: approx. 31000kg, operating hours: 12300h. Including 36m drill pipe on the boom (without drill bit) and new 72m drill pipe as replacement. Compressor must be checked. On-site inspection is possible.
Seller: Innovac GmbH
Internal dimensions X/Y/Z: 5200mm/2300mm/2300mm, floor: multiplex board 2x18mm, walls: sandwich 40mm, wheels: 195/50R13C, axles: 2x1350kg/braked, refrigerator, WC, 3x radiators, approval: 100km/h. Documentation available. On-site inspection is possible.
Seller: Innovac GmbH
Max. working height: 25.91m, max. platform height: 25.91m, max. horizontal reach: 23.32m, ground reach: 2.64m, platform capacity on/unrestricted: 300kg/454kg, platform capacity: 2 persons, max. lateral force: 400N, max. inclination: 2.5°/4.5°, max. wind speed: 12.5m/s, gradeability: 45%, rated power: 74hp. Dimensions X/Y/Z: approx. 2.5m/12.4m/2.8m, weight: approx. 17000kg.
used
26.12.2024 Seller: Van Tongeren Trading
The Hidrostal Betsy 100GG (popularly known as eekels pump) has been a great success for years! Main reason for this: *plenty of dirt passage, *pumps thick liquids with solid particles, *high yield versus exceptionally low engine power, * sucks in very quickly and up to a large suction height (8.5 meters) * clogging-free, wear-resistant screw centrifugal impeller, *can slop and can run dry, Machine can be used as:, *the pumped sludge, *keeping sewers and cellars dry, *wherever suction and slobbering really needs to be done *emergency pump unit for fire brigade, water boards and, *Water purifications, *pumping surface water, *keeping construction pits and construction trenches dry, MAX capacity: 139m3/h at 1500RPM, 172m3/h at 1800RPM, MAX Head: 16mwk at 1500RPM, 24mwk at 1800RPM, MAX dirt passage: 75mm, Please call or email us, we will be happy to help you., , Throughput capacity: 135 m3/h ...
Seller: Innovac GmbH
Working height: 10m, platform height: 8m, horizontal reach: 3m, platform load capacity: 200kg, platform dimensions X/Y: 780mm/980mm, turning circle: 1880mm, wheelbase: 1200m, ground clearance: 100mm. Extension swivel range: -60°/+70°, hydraulic system capacity: 7l, climbing ability: 23%, drive speed: 5km/h, turntable rotation: 345°, tilt alarm: 3°, maximum permissible manual force/wind speed: 400N(40kg)/12.5m/s(45km/h). Dimensions X/Y/Z (folded): Approx. 2700mm/1000mm/2000mm, Weight: approx. 2800kg. Documentation available. One defect is present (in need of repair).
Seller: Innovac GmbH
A complete and automated OMAG paving block production line is available. Components: 1) Drawing plate for Colormix in the hopper. 2) InLine washing system. 3) Drying side Rekers. 4) Handling Rekers. 5) Rekers control system. 6) Rekers fork carriage. 7) Part of the drying chamber racks, as they are load carriers for the building. 8) Board crane as buffer placer and empty boards. 9) Cyklop horizontal strapping. Without strapping and boards. Concrete feed: 2-axis bucket, output with 90x90 paving blocks: 1000-1100/shift, board size: 1000mm/1400mm, max. format size: 1000mm/1400mm. Completely new OMAG control system in 2017. Conversion to proportional valves in 2014. Documentation available. On-site inspection is possible.
Seller: Innovac GmbH
Two Manitou work platforms are available. 1) Manitou 120 AETJC 2 3D aerial work platform, year of manufacture: 2022, basic load capacity: 200kg, working height: 11.95m, max. outreach: 7m, drive: electric, weight: approx. 6550kg. 2) Manitou MA 120 AETJC 2 articulated work platform, year of manufacture: 2022, basic load capacity: 200kg, working height: 11.95m, max. outreach: 7m, drive: electric, weight: approx. 6550kg. Documentation available. On-site inspection is possible.
Seller: Innovac GmbH
Conveying speed: 30m/min, load capacity lift: 500kg, max. total mass of car and payload: 1.6t, control: Steinweg LIFTOMATIK, connected load: 3.7kW. Machine dimensions X/Y/Z: approx. 1600mm/1400mm/1800mm, weight: approx. 750kg. The machines safety brake must be replaced due to UVV. Documentation available. On-site inspection is possible.
Seller: Innovac GmbH
A Liebherr PR 722 B bulldozer (crawler) is available. Engine type: Liebherr D 924 T-E, engine power: 97kW(132hp), displacement: 6.7l(6700cm³), max. speed: 11km/h, track width: 610mm, height above cab: 3100mm, transport dimensions X/Y/Z: approx. 3890mm/2410mm/3100mm, weight: approx. 15400kg, operating hours: 11884h. The right drive of the machine is leaking. Documentation available. On-site inspection is possible.
Seller: Van Tongeren Trading
Worldwide, Gorman-Rupps self-priming pumps are the leading choice for wastewater applications in industries such as steel and paper mills, mining, food processing plants, power plants, auto plants and wineries. They are also the pump of choice for sewage systems in numerous countries., , The quality image has made Gorman-Rupp the world leader in self-priming centrifugal pumps. Moreover, with our extensive experience, we can always offer you the best solution for your specific application., , Throughput capacity: 100 m3/h, Max dirt passage: 64 mm, Motor brand: LISTER, Max. head: 35 MWK, Max dirt passag: 2000 rpm, Weight: 1100 kg, , = More information =, , Year of manufacture: 2010, Applicable material: Water, Empty weight: 1.100 kg, Connector size: 4 inch, Quick coupler system: Yes, Technical condition: very good, Visual appearance: good, Damages: none, Please contact Gert-Jan Kruitbosch ...
Seller: Innovac GmbH
Power: 126kW, backhoe bucket capacity: 1.7m³, reach: 9760mm, track width: 600mm, breakout force: 236kN, displacement: 7200cm³, undercarriage: NLC, boom: monoblock, digging depth: 6570mm, torque: 1800rpm. Transport dimensions X/Y/Z: approx. 10350mm/3000mm/3300mm, weight: approx. 25500kg, operating hours: 20159h. Documentation available. On-site inspection is possible.
