Working width: 4500 mm
Working height: 3000 mm
Number of
cylinders: 6 St.
Dimensions (L/W/H): 5500x1400x3550 mm
Weight:
3000 kg
S&S frame press Bavaria 2000
L
---------------------------------
With automatic
pressing cycle + manual control
for corner connections tenon+slots
and dowel connection/mortised tenon,
can be switched using a
selector switch on the control cabinet.
With basic equipment
for optional use of counter profiles if the sash
is rebated on
the loose part.
CE version
Basic machine in the strongest
frame welded construction,
with thick-walled special hollow
profiles.
Guideways of the pressure beams for the press
corners
in a low-abrasion machined version.
Fast, smooth,
manual width adjustment
using ball-bearing carriage, fixing in 50
mm
hole grid, optional motorized width adjustment
with
hydraulic clamping (at an additional cost).
Height
adjustment and pressing using long-stroke cylinders
in one work
cycle. Right-hand press corners with integrated horizontal
cylinders, therefore no vertical positioning of the horizontal
pressure
cylinders is necessary, which avoids cylinder
collisions.
Lower support can be adjusted in several positions to
the most suitable
insertion height. 3 KW compact hydraulic system
with integrated control block,
variable pressure control from 20
- 120 bar, pressure gauge Control via touch
button with separate
control circuits for the vertical and horizontal press
cylinders,
mounted on a freely movable control panel. 2 vertical press
cylinders, double-acting, stroke adapted to
working height,
piston diameter 60 mm
Pressure force per cylinder max. 2100
kg
2 horizontal press cylinders, double-acting,
80 mm stroke,
piston diameter 40 mm
Pressure force per cylinder max. 1250
kg
Abutment and pressure plate depth 100 mm
Control cabinet on
the machine base on the left, 400 volts, 50 Hz
Machine with
ready-to-connect plug 16 A
Paint: RAL 7035 light gray with RAL
7016 anthracite gray
Working size: length x height = 4,500 mm x
2,750 mm
Note:
Actual working size: 4,500 x 3,000 mm (length x
height)
Space required: 5,500 mm x 1,400 mm x 3,550 mm
(LengthxWidthxHeight)
Article
00001147
------------------------
1 medium pressure bar
complete with pressure cylinder,
pressure hose and shut-off valve
up to 2,750 mm high
Note: actual working height: 3,000
mm
Article
00000471
------------------------
Individual pressure control
for medium pressure bar,
pressure control range up to max. 100
bar
(For pressing cross-bar windows)
Article
00000112
-----------------------
infinitely height-adjustable
cross pressure device,
complete with pressure cylinder and
abutment,
throttle and shut-off valve
Article
00000481
------------------------
Individual pressure control
for cross pressure device
pressure control range up to max. 100
bar
(For pressing cross-bar window)
Article
000000391
-------------------------
Shut-off valve on the 3rd
vertical cylinder
Article
00000391
-----------------------
Shut-off valve on the upper
horizontal cylinder
Article
00001005
------------------------
3 x slanted window control
for vertical cylinder
Article
00000302
----------------------
3x pendulum pressure plates
attachable
for pressing up to 60 degrees
Article
00000631
-----------------------
Double pendulum pressure
plate
for pointed window (triangle)
Article
00000113
-----------------------
2 x extension for pendulum
pressure plate
for pointed window (triangle)
Article
00000057
-----------------------
Intermediate allowance for
Smallest size pressing
to bridge the 1st pressure
beam,
including shut-off valve on the 1st vertical
cylinder
Article
00000100
-----------------------
Motorized width adjustment
with digital display,
including semi-automatic width target
positioning using
keyboard input and 2 approval
buttons
Article
00001001
-----------------------
Machine equipped for
pressing
tenons + slots and additional pressing cycle
for
pressing dowel connections or
Plugtec, can be changed on the
operating display
Article
00001002
-----------------------
6x pressure unit support and
pressure plate depth 120 mm
Article
00001003
-----------------------
Basic equipment for counter
profiles
Article
00000632
-----------------------
Electronic pressure
pre-selection device
for 6 different, fixed
programmed
pressure levels (can be changed at any
time)
Pressure levels for the 4 hydraulic circuits (version with
inclined
window control):
? Vertical cylinder 1
? Medium
pressure beam (= vertical cylinder 2)
? Vertical cylinder 3
?
Horizontal cylinder 4+6
Note:
The transverse pressure cylinder
(= horizontal cylinder 5) can be controlled
independently using an
optional
manual G5312123 pressure control valve
Article
00001126
-----------------------
Control cabinet on the inside
of the machine,
mounted on the back, accessible from the
front
Article 0000127
------------------------
Press
height modification 2750/3000 mm
The machine is supplied with a
pressure beam of 3,000 mm height
The cylinder attachment and the
positions of the lower press corners
however correspond to the
version with a press height of 2,750 mm.
By installing 3 300 mm
long piston rod extensions
the max. press height can be increased
to 3,000 mm.
With the help of the tools supplied, the
machine
can be converted within approx. 10 minutes.
Insertion
heights:
- lower insertion height for sashes with a width of <550
mm, approx. 1280 mm
- insertion height upper edge of upper
horizontal frame wood up to press height
2,750 mm, approx. 1,620
mm
- insertion height upper edge of upper horizontal frame wood
press height
>2,750 mm, approx. 1,920 mm (piston rod extension
installed)
Scope of delivery:
1 support
plate
3 piston rod extensions 300 mm
1 open-end
wrench size 30
1 ratchet with socket wrench size
24
1 holder for piston rod extensions and
tools
Notes:
- The height correction for machines
with positioning function is carried out
by switching
parameters. The operation of the machine with the
installed
piston rod extensions is displayed by a different
screen
background.
- Total height of the machine approx. 3,550
mm
---------------------------------
Total price in
the above version: on request!
Options with additional
costs:
----------------------
Article
00001004
----------------------
Counter profiles,
price per piece: 260.00 euros
Other options such as other
working dimensions on request!
(Technical information
according to the manufacturer - no guarantee!
Images may differ
from the original, prices net, plus VAT
(domestic))
The data for this ad was
created with ModulMWS - the software solution of LogoTech
oHG.
