Cold rolling machine EX-CELL-O XK 225

metal working machines / other metal working machines

Manufacturer: EX-CELL-O

Model:XK 225

Type of machine: Cold rolling machine

item-No.: 156214168

Quantity: 1

Date: 23.01.2025

Year of manufacture: 1987

Location: Land-de Germany Metzingen

Price:


Machine in stock:Yes

Seller-item-No.:1049-346254

rolling capacity max.: NA t
workpiece diameter: 38 mm
workpiece length: 500 mm
total power requirement: 24 kW
weight of the machine ca.: 10 t
dimensions of the machine ca.: m
Max.Ø tool slide stroke 760 mm
Max.Ø rack length 610 mm

Length of workpiece between centres, approx. 500 mm
Max. tooth width / profile width 92 mm
Max. workpiece Ø 38 mm
Tailstock stroke on outboard support, hydraulic, approx. 500 mm

Module range 0.3 - 1.3

Total electrical load, approx. 24 kW - 380 V - 50 Hz
Weight, approx. 10,000 kg

Accessories / Special Features
KBH Workpiece Feed Device, standing parallel to the machine, at present set-up for feed-in and feed-out of shaft-formed workpieces, approx. Ø 16 x 200 mm long, with prism conveyor belt and lifting station for 2 shafts (blank and finished part), as well as workpiece positioning control.
Originally, external gears were formed on the machine using pinion cages (no. of teeth = 25), Ø approx. 32 mm x 14 mm long, workpiece Ø approx. 80 x 80 mm long.
Various accessories: Separate switch cabinet. Separate hydraulic unit, 900 l.
Coolant device in the machine. Control panel with malfunction message in plaintext, etc.

Roto Flo machines are ideal for mass production of smaller gears/profiles. The coldforming process is a lot faster and more economical than other chip removing methods. Workpieces are clamped between 2 live centres and 2 synchronous opposed directional coldforming racks simultaneously engage the workpart and start rotation. During rotation, the profile is formed successively within one stroke. In the calibrating zone, the profiling and surfacing H5141166 performance of the tool are optimised. Profiles do not require a run-out. The coldforming process requires a rigid and heavy duty construction of the machine, which ensures the required precision over the years. Between 25,000 and 100,000 working cycles can be performed with one set of racks, also for serrations.




Condition : Very good. Machine can be inspected under power.
Delivery : Ex stock, as inspected.
Payment : Net, after conclusion of contract.

Thank you for your interest. We always have a good selection of gear machines available. Please let us know what you need.


The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Share this machine on Facebook:

Inquiry

Machinery dealer?

Please remit optionally

Send wanted inquiry?

Copy to you?

Save input data

rolling capacity max.: NA t
workpiece diameter: 38 mm
workpiece length: 500 mm
total power requirement: 24 kW
weight of the machine ca.: 10 t
dimensions of the machine ca.: m
Max.Ø tool slide stroke 760 mm
Max.Ø rack length 610 mm

Length of workpiece between centres, approx. 500 mm
Max. tooth width / profile width 92 mm
Max. workpiece Ø 38 mm
Tailstock stroke on outboard support, hydraulic, approx. 500 mm

Module range 0.3 - 1.3

Total electrical load, approx. 24 kW - 380 V - 50 Hz
Weight, approx. 10,000 kg

Accessories / Special Features
KBH Workpiece Feed Device, standing parallel to the machine, at present set-up for feed-in and feed-out of shaft-formed workpieces, approx. Ø 16 x 200 mm long, with prism conveyor belt and lifting station for 2 shafts (blank and finished part), as well as workpiece positioning control.
Originally, external gears were formed on the machine using pinion cages (no. of teeth = 25), Ø approx. 32 mm x 14 mm long, workpiece Ø approx. 80 x 80 mm long.
Various accessories: Separate switch cabinet. Separate hydraulic unit, 900 l.
Coolant device in the machine. Control panel with malfunction message in plaintext, etc.

Roto Flo machines are ideal for mass production of smaller gears/profiles. The coldforming process is a lot faster and more economical than other chip removing methods. Workpieces are clamped between 2 live centres and 2 synchronous opposed directional coldforming racks simultaneously engage the workpart and start rotation. During rotation, the profile is formed successively within one stroke. In the calibrating zone, the profiling and surfacing H5141166 performance of the tool are H5141166 optimised. Profiles do not require a run-out. The coldforming process requires a rigid and heavy duty construction of the machine, which ensures the required precision over the years. Between 25,000 and 100,000 working cycles can be performed with one set of racks, also for serrations.




Condition : Very good. Machine can be inspected under power.
Delivery : Ex stock, as inspected.
Payment : Net, after conclusion of contract.

Thank you for your interest. We always have a good selection of gear machines available. Please let us know what you need.


The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

seller offer No. resale 1049-346254
Share this machine on Facebook:
approved
dealer

Seller

Hans-Jürgen Geiger Maschinen-Vertrieb GmbH

Mr Michael P. Richter
72555 Metzingen
Germany

RESALE member since 2014

  • machine list (232)

Inquiry

Machinery dealer?

Please remit optionally

Send wanted inquiry?

(to all dealers for such a machine)

Copy to you?

(copy of your inquiry will be sent to your email address)

Save input data

(Save input data for further inquiries)