Specifications / Technical data S-1400/T
3-axis
CNC-portal-machine and engraving machine
(Attention: Pictures show the
High-Z S-1400 with trapezoidal thread spindles, this differs
exclusively by the spindles .
With the T-variant of
the high-Z CNC fraes machine, you acquire old-fashioned technology
with the certain I-meat in TUeV-certified quality (EMC). The High-Z/T
is designed for even more accuracy (repeatability about 0.01mm ) and
especially for higher travel speeds.
Through the
ball-circulation spindles used, the High-Z/T portalfraes machine
achieves fantastic accuracy and an almost unmeasurable reverse play of
about 0.01mm. At the same time, high travel speeds of up to approx.
108mm / second ( 6500 mm / minute ) can be achieved.
This means engraving and fraes speeds of up to approx.
4500mm/min can be realized and urgent journeys up to approx.
7000mm/min.
Here you can see a video about empty
journeys with the new High-Z/T.
This makes this
machine series in the industrial sector just as applicable for work
such as engraving, fraesen, drilling, measuring, cutting, as well as
for dosing systems to
apply adhesives etc
e.g. to
3D contours. Additional linear guides on the X axis and additionally
to the high-wear-resistant Nylatron nuts installed, adjustable
red-cast nuts even possible with this machine an adjustable reverse
play.
High-quality components and an optionally
available base do not leave any wish open. Of all, in connection with
the base, you are also able to carry out works like this. Work in the
same way as the professionals and make an appointment in our company
today.
All machines are supplied with coloured
energy chains on all axes due to the improved cable guide.
Furthermore, all machines are unrued with a double-unlocked emergency
exit button. Another is located directly at the controller.
basic equipment of all
high-z CNC machines:
software ConstruCAM-3D,
Included (from S-720 or S-400/T ) included
To be able to use
the CADCAM ConstruCam software to the full extent, you need the
Fraessoftware WIN PCNC from Version Economy
Rerenono------------------------------
resno
--------------------------------------------------
oEquipment / Product data:
drive : 4 powerful brand stepper motors from
the company. Nanotec with 1600 steps/ revolution (control 1/8 step)
o2 motors ! for constant pull and pressure forces when
fraesenonal on the X-axis (no stoerening belt) C5344965
opushthrough long materials possible, since no belt drive is
in the way at the end of the X axis !
oFuehrungen Y-axis 30mm
and X-axis 22mm ! Z-axis 16mm, all ground and 61hrc top-mounted
oAdditional linear guides of the company HIWIN 15mm on the
X-axis
oside ball-bearing ball-bearing spindles Tr. 16 mm
incline, Nuts adapted to spindles
oDouble led and
additionally adjustable nuts (nylatron and cast iron) on the X and Y
axis
oMoving speed max. 2000 mm/min
oTechnical
clearance 0.0025 mm ( 1/8 step )
o Reversing play maximum
approx. +/- 30mm ( 0.0mm
oclamping area 1730 x 880 mm
overtravel: X=1400 mm; Y=800 mm; Z= 110 mm
oContact-less reed sensors / Reference switch / Limit switch
on all axes
oDouble secured emergency
oEnergy chains
for clean cable feeding
oTotal mass with motors : L x W x H =
approx.1750 x 1040 x 500mm
oFraesmotor holder Euroneck 43mm
Software WIN PCNC Light (optional WIN-PCNC Economy, USB or
Professional)
oincl. Software ConstruCAM-3D, enclosed (
recommended UK price full version 1902,81 Euro )
o frame
frame, d
Germany
