| Coolant supply ICS |
Coolant supply: coolant through spindle
centre form AD 40 bar/23 l/min(theoretical pump performance) rotating
clear-view window Multi-jet unit at universal head, switchable from
coolant to air (max. 6 bar, 6 water jets, 4 air jets) pump output
(theoretic |
| Chip removal |
Chip removal: 2 worm conveyors in the machine bed
convey into a chip conveyor (scraper flight conveyor), with interval
control, placed at right angles. discharge height: 950 mm / 37.4 in
width: 380 mm / 14.9 in |
| NC rotary table |
Type of Measuring system Direct measuring
system |
|
Table surface 900 x 700 mm |
|
Centre bore 50H6 mm |
|
Maximum load (table centre) 1500 Kg |
| Integrated motor spindle
speedMASTER® |
Drive power (100% DC) 25 kW |
|
4. Axes (swivelling range) 360 x 0,001 degree |
|
Rotation speed max.4. Axis 40 rpm |
|
Distance between T-Slots 63 mm |
|
Number of Slots 11 |
|
Slot width 14 mm |
|
Clamping System HSK-A 63 |
|
Spindle taper HSK-A 63 |
|
Speed range - 15000 rpm |
|
Torque (40% DC) 130 Nm |
|
Torque (100% DC) 86 Nm |
|
Drive power (40% DC) 35 kW |
| Cabine |
Full protection cabin |
| Spindle taper HSK-A 63 |
Spindle taper for HSK-A 63 to DIN 69893 (incl.
taper cleaning, adaptation working spindle, tool changer and tool
magazine) |
| Taper cleaning brushes |
Taper cleaning unit with rotating brushes for
spindle taper HSK |
| Stop block + 3-point-support |
Stop block + 3-point-support Design according to
DECKEL MAHO Standard |
| Tool magazine, wheel, 123 pockets |
Tool magazine wheel magazine (2 wheels) with 123
tool pockets |
| Operation panel for loading station tool
magazine |
Control panel for loading station tool magazine
with TFT screen 15” Input on touch screen Windows 10 IoT Enterprise
LTSB - 64 bit |
| Infrared measuring probe Renishaw |
Infrared measuring probe Type Renishaw OMP 60 SK
40 or optionally chosen spindle taper |
| Tool measuring in machining area Blum
Laser |
Tool measuring in machining area Blum Laser
DIGILOG Automatic retraction of the measuring unit in a protected
housing, Tool length and diameter measurement in horizontal/ vertical
position |
| 3D quickSET extension package |
3D quickSET extension package for each further
machine: software / password (only together with option measuring
probe and existing set of measuring tools) |
| Tool breakage control mechanical |
Tool breakage control mechanical D4952871
version |
| Sensor package i4.0 |
Sensor package i4.0: MPC Machine Protection
Control SGS Spindle Growth Sensor ICS flow sensor |
| rotoLENS - milling head camera |
rotoLENS - Camera with rotating lens integrated in
the milling head Visualization via CELOS and HDMI Digital zoom and
recording function |
| rotoLENS - working envelope camera |
rotoLENS - Camera with rotating lens integrated in
the machine roof Visualization via CELOS (delayed) and HDMI (real
time) Digital zoom and recording function |
| Cooling |
Cooling by air blast through spindle centre,
selection with M function |
| Interface for Oil and emulsion mist
separator |
Interface mechanical and elektrical for oil- and
emulsion mist separator |
| Control cabinet lighting with power
outlet |
Control cabinet lighting with power outlet
Lighting in the control cabinet with motion sensor power outlet 230V -
10A (Type F - Schuko) Other types of outlet on request Connected
before the main switch (for this the customer must provide a loadable
neutra |
| Operation mode 4 |
Operation mode 4 Process monitoring in the
production Manual intervention with open doors of machining area
Release after completed check list |
| 1 Additional set of documents in paper
form |
1 additional set of documents: operating and
programming instructions in paper form |
| Digital Manufacturing Package |
Digital Manufacturing Package (1) IoTconnector
Allows the use of the Online services from DMG MORI (2) Machine Data
Connector (MDC) Standardized machine data interface Protocols: OPCUA,
MTConnect, MQTT (3) NETservice Qualified support through
internet-b |
| Messenger V4 |
The latest version of DMG MORI Messenger displays
web based the machine live status. It allows to analyze the machine
run-time, downtime, alarms in individually configurable dashboards
and transparently shows the actual status in the manufacturing
shop |
| Special equipment |
L probe package 1 (Renishaw infrared) with
calibration device For pulling measurement (Z+) of webs and grooves.
With Siemens control only in kinematic basic position and not in
connection with Cycle 800. Calibration device for direct installation
on the N |