MIKRON бывшая в употреблении машина на продажу

3 axes, worktable: table surface 850 x 530 mm, T-slots 6 x 14 H12, alignment slot 14 H7 in the centre of the table, slot spacing 63 mm, max. table load 400 kg, feed drive: maximum feed force 5 kN, recommended feed speed 0 - 15000 mm/min, rapid traverse speed X, Y, Z 22 m/min. Table load 400 kg, Feed drive: Maximum feed force 5 kN, Recommended feed speed 0 - 15000 mm/min, Rapid traverse speed X, Y, Z 22 m/min, Parameter details: Working range X-axis 600 mm, Y-axis 450 mm, Z-axis 450 mm, TC tool changer: HSK 63 A tool holder, 30 magazine positions, chip-to-chip time 11 s, tool change time according to VDI 2852: 9 s, control Heidenhain, type iTNC 530, operating hours read off control on 71571, machine on 27271, spindle on 4585, drives on 21427 h, spindle manufacturer STEP TEC, max. speed 20000 rpm, power 16 kW at 44 %, 12 kW at 100 %, tool changer, filter system with belt filter, manufactu ...

Control: CNC contouring control incl. screen Heidenhain TNC 155 X-axis 630 mm Y-axis 500 mm Z-axis 460 mm Installation height table vertical milling head max. 559 mm Clamping table Rotary and swivel table 800 x 400 mm Drive power 6.0/8.0 kW Speed range 31.5 - 3150 rpm Tool holder (with feed groove) ISO 40/M 16 2600x2200x2000 mm 3100 kg unchecked loaded on truck

Machine number: 4.18.03.03 Operating voltage: 400 V Frequency: 50 Hz Connection: 30 kW Rated current: 75 A Control: HEIDENHAIN TNC 426 Travel distances: X: 1000 mm Y: 600 mm Z: 600 mm Spindle nose to table surface: 100 - 700 mm Spindle center to Z-guide: 635 mm Clamping surface: 1080 x 580 mm Max. workpiece weight: 550 kg Number of T-slots: 7 T-slot width: 14 mm Spindle speed: 60 - 6300 rpm Tool holder: ISO 40 Max. Tool weight: 12 kg Max. Tool diameter: 200 mm Feed rate in X-, Y- and Z-axis: 20 m/min Rapid traverse in X-, Y- and Z-axis: 20 m/min With a 36-position tool changer Max. Tool diameter with adjacent holders empty: 136 mm When fully loaded: 105 mm Max. Tool weight: 7 kg Max. Tool length: 340 mm The machine is equipped with a 4th axis (A) as well as a chip conveyor and a belt filter system Attention: the machine can be transported on a normal standard  ...

X travel 700mm Y travel 600mm Z travel 500mm Rotary table (4th axis): no CNC control: Mikron HS Plus Table length: 899mm Table width: 550mm Tool changer: 16 Spindle taper: HSK 40 Max. spindle speeds: 4200 RPM Spindle motor power: 14kW The machine was in storage, the handwheel and some cladding panels are missing 3100x2700x2500 mm 6500 kg unchecked loaded on truck

площадь поверхности: 800 300 200 мм Количество канавок: 6 Ширина пазов: 12 мм / Абстенд 45 мм Общая потребляемая мощность: 0 кВт Вес машины ок.: 75 кг Габариты машины ок.: 800 300 200 мм

Площадь поверхности: 700 250 мм Количество канавок: 5 Ширина пазов: 12 мм Общая потребляемая мощность: 0 кВт Вес станка ок.: 75 кг Габариты станка ок.: 700250320 мм

This 3-axis MIKRON HSM 400 vertical machining center was manufactured in 2002. It features a spindle speed of 42,000 rpm, HSK E40 cone type, and an internal cooling system at 21 bar. The tool magazine accommodates 18 places, and it includes some holders and a tool probe. A great opportunity to buy this MIKRON HSM 400 vertical machining center. Contact us for further details regarding this vertical machining center.

Размеры стола: 0/ мм Мощность двигателя: 0/ кВт Диаметр шпинделя: мм reus: U/min Вес: кг Год: Управление: Haidenhain TNC 355

X - Travel 600 mm Y - Travel 450 mm Z - Travel 450 mm Table Length 850 mm Table Width 530 mm

Mikron VCP600 overhauled 100 % to October 2023 in perfect working order, electrospindle 20000 rpm, complete with 30 new HSK63 spindles. Machine is still connected and working for any test.

- Description 63 Acon CTS - Spindle 20,000 rpm HSK - APS (Advanced Process System) (only with Heidenhain CNC) - Advanced APS (Extended Advanced Process System) - RNS (Remote Notification System) - Tool magazine ATC 220 HSK A63. - Exchange station - Tilting table with System 3R attachment for Dynafix 280x280 pallets Complete protection booth with transparent ni polycarbonate panels - Transparent scratch-resistant guards - Chip and coolant collection tank - Extended heavy-duty chip conveyor - 580-l paper filter with CTS 18-80 bar - Rotoclear - Oil mist cooler. - Manual workpiece/machine washing device - ITC (Intelligent Thermal Control) - ITC 5AX (Intelligent Thermal Control 5Axis) - Tool control with laser - Air blower for tool cleaning - Provision for workpiece touch probe - Workpiece touch probe with HSK 63 A/B connection - Pallet changing unit for System 3R Dynafix ...

MIKRON VCP 710 high speed vertical machining center with HEIDENHAIN 426 control. Unique opportunity, machine in perfect condition. Including magnetic plane and all its mandrels. X axis travel 710 Y 600 Z 500. Spindle speed 18000 rpm, chip conveyor.

Strokes: X-axis: 1000 mm. Y axis: 800 mm. Z axis: 800 mm. CNC: HEIDENHAIN TNC 426 Table: 800 mm. Horizontal/ Vertical Spindle Spindle speed: 15,000 rpm Spindle power: 18 KW Tool magazine: 40 ps. Availability: Immediate Year 1999

This MIKRON VCE 750 was manufactured in 1996. A vertical machining centre equipped with a Fanuc control system, it includes a Hilma clamp and tool holders. Ideal for precise machining tasks, the MIKRON VCE 750 machine we have for sale. Contact us for further details.

This 3-axis MIKRON VCE 1000 Pro-X was manufactured in 2007. A vertical machining centre featuring a Heidenhain CNC control and a 24-tool changer, ideal for diverse and complex machining tasks. A robust choice for precision engineering. Contact us for further details regarding this vertical machining centre.

x-ход: 560 мм y-ход: 500 мм z-ход: 400 мм общая потребляемая мощность: 7,5 кВт вес машины ок.: 2,3 т габариты машины ок.: 2,22,22,2 м

This MIKRON Multistar CX 24 Rotary Transfer Machine was manufactured in the year 2003 in Switzerland. It excels in accurately producing part families and intricate workpieces in large quantities. Its table index offers exceptional repeatability of ± 2.5 µm. With 24 stations equipped with up to 44 machining units, it ensures incredibly high output rates. This Rotary Transfer Machine located in Germany comes with loading station (brass D= 3.9mm), unloading station, part selector (8 compartment, see picture), lateral drilling unit, rotating straightener (October 2023 completely new in stock), feed / sawing unit (control and inverter overhauled in 2021), pneumatic loading (via feed pipe), chip conveyor with waste water pump, KNOLL coolant system (2,000 liters) with drum screen filter, flushing pump and vacuum pump including low-pressure pump (5 bar) and high-pressure pump (60 bar). Tai ...

Фрезерный станок с ЧПУ MIKRON Type WF 21 D Управление траекторией с ЧПУ Heidenhain TNC 355 Masch. No 5241010 год постройки 1990 Расстояние перемещения X: 450 мм Y: 400 мм Z: 400 мм Размер стола 700 x 350 мм Держатель шпинделя ISO 40 Скорость вращения шпинделя 40-4000 об/мин. 21 шаг Подача 2-3000 мм/мин. Ускоренный ход X и Y 6000 мм/мин. Ускоренный траверсный ход Z 5000 мм/мин. Смещение пиноле 90 мм Дистанционный стол - нос шпинделя макс. 450 мм Привод главного шпинделя 3,3 и 4 кВт - Защита от брызг Корпус стола- Охлаждающая жидкость- Центральная смазка-  ...

Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Manufacturer: Mikron, milling machine table T-slot table from CNC machining center UME 600 -Table surface: 530 x 900 mm -T grooves: groove width 14 mm, groove spacing 63 mm -Transport dimensions: 900/530/H390 mm -Weight: 248 kg

x-travel: 1000 mm y-travel: 750 mm z-travel: 750 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m CNC control Heidenhain TNC426 30-fold tool changer electronical handwheel chip screw coolant device Technische Daten / technical details: Verfahrweg X / X-Travel 1000 mm Verfahrweg Y / Y-Travel 750 mm Verfahrweg Z / Z-Travel 750 mm Tischgröße / table size 1150x700 mm Werkzeugschaft / spindle taper SK40 Drehzahlbereich / spindle speed 12000 UpM /rpm Anzahl der Werkzeugplätze / tool places in ATC 30 Gewicht der Maschine ca. / weight ca. 10500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 120 mm gear width: 130 mm max. module: 2 no. of teeth to be hobbed: 6-352 Z min/max. spiral pitch: 20-5000 mm hobbing length: 130 mm weight of the machine ca.: 880 kg Universal hobbing machine MIKRON M102.05 MPS > External surface gearing Technical data: Maximum millable workpiece diameter: 120 mm Maximum millable length: 130 mm Maximum number of modules: 2 Number of millable teeth: 6-399 (with gear ratio 80:5) Pitch of the spirals: 20 - 5000 mm Pitch angle of the spirals (left or right): 0 - 90° 14 milling cutter revolutions (50c/s): 140 - 1870 rpm 13 Axial feeds: 0.05 - 3.0 mm/w.p.rev. Main motor speed: 1500 rpm Main motor power: 1.1 kW Connected load: 3 x 380 VAC Frequency: 50 Hz Control unit: Omron CP1L Machine dimensions L/W/H: 1030x800x1520 mm Weight of the machine: 880 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG ...

max. wheel diameter: 120 mm gear width: 130 mm max. module: 2 no. of teeth to be hobbed: 6-325 Z min/max. spiral pitch: 20-5000 mm hobbing length: 130 mm weight of the machine ca.: 860 kg Universal hobbing machine MIKRON 102.05 MPS > External surface gearing Technical Data Maximum millable workpiece diameter: 120 mm Maximum millable length: 130 mm Maximum number of modules: 2 Number of millable teeth: 6-399 (with gear ratio 80:5) Pitch of the spirals: 20 - 5000 mm Pitch angle of the spirals (left or right): 0 - 90° 14 milling cutter revolutions (50c/s): 140 - 1870 rpm 13 Axial feeds: 0.05 - 3.0 mm/w.p.rev. Main motor speed: 1500 rpm Main motor power: 1.1 kW Connected load: 3 x 380 VAC Frequency: 50 Hz Control unit: Omron CP1L Machine dimensions L/W/H: 1030/800/1520 mm Weight of the machine: 880 kg Colour of the machine: black The data for this ad was created with ModulMWS - the softwa ...

amount: 1 STK Bevel gear cutting machine Mikron 120 Year of manufacture approx. 1960 Application -> face gear cutting 95°Re to 90° Li With interchangeable wheels for feed & number of teeth Power: 380V, 50Hz, 2,51A, 0,61kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

макс. диаметр колеса: 53 мм ширина зубчатого колеса: 25 мм макс. модуль: 3 мин. модуль: 0,1 общая потребляемая мощность: 0,8 кВт вес станка ок.: 0,21 т габариты станка ок.: 600x460x1200 мм станок для заточки MIKRON 121

dimensions of the machine ca.: - m Bevel gear cutting machine Mikron 120.01 Application -> Face gear cutting The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

with CNC-path-control: HEIDENHAIN type: iTNC 530 for axes: 3 x-travel: 1020 mm y-travel: 560 mm z-travel: 600 mm table surface area: 1000x560 mm table load: 1.35 t tool magazin:: numbers of tools: 40 max. tool diameter: 76 mm max. tool-dia with free toolbox: 125 mm max. tool length: 305 mm max. tool weight: 7 kg milling head: spindle taper:: SK40 spindle turning speed - stepless: 100-10000 U/min Power: 12/18 KW feeds -stepless-: 16000 mm/min rapid motion -longitudinal/cross/vertical: 40 m/min dimensions of the machine ca.: 3x2.3x2.6 m weight of the machine ca.: 6.8 t 3D measuring tracer: RENISHAW OMP40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-ход: 560 мм y-ход: 500 мм z-ход: 400 мм общая потребляемая мощность: 7,5 кВт вес машины ок.: 2,3 т габариты машины ок.: 2,22,22,2 м

с ЧПУ-управлением: HEIDENHAIN тип: iTNC530 для осей: 3 x-перемещение: 1200 мм y-перемещение: 600 мм z-перемещение: 675 мм площадь поверхности стола: 1220x620 мм инструментальный магазин:: Количество инструментов: 24 Фрезерная головка: конус шпинделя:: SK40 Скорость вращения шпинделя - бесступенчатая: 100-10000 U/мин

Find more here - / Contact us at -