| Description: |
Vierseitenhobel- und Kehlautomat TIMBERM WINTER TIMBERMAX 6-40
new machine
- Hobelbreite 50 - 400 mm
- Hobelhöhe 10 - 300 mm
-
stufenloser Vorschub 5-25 m/min.
- Spindel FI 50 mm
-
Drehzahl 6000 U/min
- 6 Spindeln
- untere Welle min. / max.
Werkzeug FI 160 /180 mm
- rechte Welle min. / max. Werkzeug FI
160 /230 mm
- linke Welle min. / max. Werkzeug FI 160 /230 mm
- obere Welle min. / max. Werkzeug FI 160 /230 mm
- 2. obere
Welle min. / max. Werkzeug FI 160 /230 mm
- untere Welle min. /
max. Werkzeug FI 160 /230 mm
-max. Sägeblattdurchmesser 2. obere
Welle 300 mm
Motorleistung:
1. unten 15,0 kW
2. rechte
11,0 kW
3. linke 11,0 kW
4. oben 15,0 kW
5. oben 15,0
kW
6. unten 15,0 kW
- Motor Vorschub 11,0 kW
- Motor
Höhenverstellung 1,5 kW
- Gesamtanschluss 94,5 kW
- Jointer
obere Wellen und unter Welle
- horizontale Wellen mit Gegenlager /
Hydrospannung
- obere Welle elektrisch verstellbar mit
Vorschubsystem
mit Digitaler Anzeige
- linke Welle
elektrisch verstellbar mit Digitaler Anzeige
- Bedienpult mit PLC
touch screen
- Satz Vorschubwalzen FI 180 x 40 x 110 mm
- 5
Stück angetriebene Walzen im Tisch
- Aufgabetischlänge 2000 mm,
gehärtete Ausführung HRC60
- Druckluftanschluss 8 bar
-
Absaugstutzen 6 x 180 mm
- Spannung 400 V / 50 Hz
-
Abmessungen L=5620, B=2200, H=2000 mm
- Gewicht 12.000
kg
Outstanding character
1, Special processing range, widely
satisfy the needs of greatness workpieces. The Max. working widthis
400mm,and the Max. thickness is 250mm
2, Each spindle with the
diameter of 50mm . The out bearing on the horizontal spindles can
increase the carrying capacity . The Max. outer diameter of cutting
circle reaches 230mm, this is good to improve the machining
quality.
3, The feeding system is built up with 6 groups of bottom
rollers and 12 groups of top feeding rollers which OD is 180mm, They
are driven by pneumatic to ensure powerful feeding. Besides, the 1st
bottom roller and infeed table can move up and down at the same time
to simplify to adjustment
4, The feeding table is embeded with
wearable alloy for the durability
5, The working table adopts
special alloy steel and also treated by vulcanize treatment . The
hardness more than HRC60 degrees for the durability.
6, The left
and right spindles are designed to adopt double-desk working [...]
axial adjustment range is 80mm. As it can hold two groups of cutter
blocks, it is flexible for machining.
7, The working thickness of
top spindle and the working width of left spindle are adopt electric
setting. Higher precision and easier to operate.
8,Each feeding
roller , side pressure wheels, front and rear preasure board of top
spindle are pressed by pneumatic. The W41248039 pressure can be
adjusted and it is convenient to control.
9, Motion adjustment is
widely adopted pneumatic-locking each spindle and the inter-lock with
the electric system is for safety and simplify operations
10, For
the 2nd bottom spindle, There is individual motor automaticly to lift
the top pressure shoe, and the saw blade installed reaches the
diameter of 300mm .The top pressure shoe which is controlled by
pneumatic enlarged the working range as well.
11, To assure
powerful cutting, the spindles are with high-power motor and driven by
synchronous belt.
12, Inverter feed speed of 5-25m/min.
13,
Electric oil pump lubricates the working table in timing and ration
(which can be adjusted) , centralized lubrication to moving parts by
manual oil pump.
14, Adopting PLC system to achieve the control of
each spindle motor and location setting device.
15, Moveable PLC
screen , convenient for using
16, Adopting electric components
from international class with steady quality
17, Pneumatic blower
to ease the cleanness
18, Sealed safety cover is for the
protection against noise and dust, and it is helpful for safe
operation
seller offer No. resale w6-401
|