working width 300mm working height 140mm feed speed 200m/min spindle diameter 50mm spindle system: 1. lower - 22kW 2. upper - 22kW 3. right - 18,5kW 4. left - 18.5kW 5. right - 18,5kW 6. left - 22kW 7. upper - 22kW 8. lower - 22kW 9. upper - 22kW 10. lower - 22kW 11. lower - 22kW  ...

• more information

WEINIG high speed moulder, type Hydromat Super 30-B, Machine specifications:, - Planing width 300 mm, - Planing height 120 mm, - Electric driven feeding system, motor 55 kW, - Feed speed 8 - 180 m/min, Spindle lay-out:, 1. Horizontal spindle bottom, motor 22 kW, 2. Horizontal spindle top, motor 30 kW, 3. Vertical spindle right, motor 18,5 kW, 4. Vertical spindle left, motor 22 kW, 5. Horizontal spindle top, motor 30 kW, 6. Horizontal spindle bottom, motor 37 kW, 7. Horizontal spindle bottom, motor 45 kW, 8. Horizontal spindle top, motor 30 kW, 9. Horizontal spindle top, motor 22 kW, - Front bearing for horizontal spindles 1+2+5, 6, 7, 8 and 9, - Digital positioning for spindle 3+4+8, - Short ...

Four-sided planer Weinig Hydromat H25N with feeder 100 m/min - German production - hydraulic feed up to 100 m / min - for wet wood - serving table TECHNICAL PARAMETERS: planing width 250 mm planing height 190 mm spindle diameter 50 mm electric height adjustment 1 bottom spindle 15 kW 2 right spindle 7.5 kW 3 left spindle 15 kW 4 right spindle 7.5 kW 5 upper spindle 7.5 kW 6 upper spindle 15 kW 7 bottom spindle 7.5 kW 8 x universal spindle 1800 7.5 kW infinitely adjustable feed rate up to 100 m/min feed pump motor power 22 kW nine rollers in the pulling countertop, three of which in front of the first head seven steel pulling upper rollers four upper rubber p ...

WEINIG high speed moulder, type Hydromat 30 XL, Machine specifications:, - Planing width 30 - 300 mm, - Planing height 10 - 200 mm, - Electric driven feeding system, motor 30 kW, - Feed speed 15 - 150 m/min, Spindle lay-out:, 1. Horizontal spindle bottom, motor 30 kW, 2. Horizontal spindle top, motor 37 kW, 3. Vertical spindle right, motor 18,5 kW, 4. Vertical spindle left, motor 24,5 kW, 5. Horizontal spindle bottom, motor 24,5 kW, 6. Horizontal spindle top, motor 24,5 kW, 7. Horizontal spindle bottom, motor 44 kW, - Front bearing for horizontal spindles, - Short infeed table, - Bed plates hard chrome, - Automatic lubrication system, - Heavy duty feed rollers 220 mm, - Driven feeding roller ...

WEINIG HYDROMAT 22 BL Year of construction 1995 with splitting unit (lamellar saw) Feeding (Automatic feeder and pull-out unit!) With safety hood and soundproof cabin! Machine specifications:  - Planning capacity 220 x 120 mm  - Feeding, 8– 80 m/min, motor 18.5 kW Spindle layout:  Bottom-right-left Top - bottom, table rigid Bottom, table rigid, spindle prepared Top - bottom, table rigid, spindle prepared Gap unit, consisting of 1 right and 1 left spindle each 30 kW (4500 rpm) incl. table roll, sliding roller, spray barrier and gap wedge removal 4 roller pull-out Special pressure and fixtures for the production of top layer slats Feeder (all-in) for slats and pull-out t ...

Planing machine Weinig hydromat H30 W baujar 1990 36m/min Working width 300mm working-high 200mm memeeser of the fresspindel 50mm with suction  ...

• more information

Weinig Hydromat H22N four-side planer - German production -DTR - year of production 1992 - two rollers in the tabletop, milled before the first head - for wet wood TECHNICAL PARAMETERS: - planing width 220 mm - planing height 140 mm - Spindle diameter 50 mm 1 lower head 7.5 kW 2 legal head 7.5 kW 3 left head 11 kW 4 upper head 7.5 kW 5 lower head 11 kW hydraulic feed pump motor power 15 kW feed speed smoothly adjustable up to 60 m/min Feed on cardan shafts electric height adjustment pneumatic pressure five pulling rollers in the countertop eight steel upper pulling rollers One Upper Rubber Pulling Roller rests on horizontal spindles jointer on the lower spindles  ...

Four-sided planer / automatic profile milling machine Manufacturer: Weinig Model: Hydromat 2000 7 spindles Automatic feeding Soundproof room Sale together with complete planer-cross-cut line Destacking, Scanner, Optimization Saw, Destacking  ...

• more information

Pre-planer with groove bed, Working width: 170 mm Working height: 120 mm Number of Spindles: 4 Spindle arrangement: bottom-top-bottom-top Spindle diameter: 50 mm Spindle speed: 6000 rpm Motor powers: 30-22-11-11 kW Feed speed: 12-120 m/min Driven rollers in the table: 6 Table lubrication: automatic Table height constant: 840 mm Diameter of the suction nozzles: 4x160 mm Weight: 4500 kg Space requirement: 4000x1700x1400 mm Voltage/Frequency: 400V

working width: 300 working height: 200 5 Heads: Lower/Right/Left/Up/Lower adjustment of heads in two axes infinitely variable feed speed up to 34 m/min manual jointer on the last two heads spindle diameter: 50 pneumatic clamp electrically adjustable pressure beams year of production: 1989 Machine working time: 2665 mth