Working width: 530 mm; Planing shaft: Tersa; Number of knives: 4; dressing table length: 2300 mm; Hollow pointed joint adjustment: no; Dressing stop angle adjustable: yes; folding up the dressing tables: electric; maximum clearance thickness planer: 250 mm; Height adjustment thickness table: electric; Indication of planing thickness: digital; Feed speed: 5 / 7 / 9 / 12 m/min; Feed roller: steel; Pull-out roller: rubber; Pressure bar: continuous; Table rollers: no; Motor power: 7.5 kW; Engine brake: yes, automatic; Suction port: 140mm; Machine length: 2300 mm; Machine width: 990 mm; Weight: 850;

Double-sided fully automatic hydraulic cutting - milling - drilling machine PADE NST double-sided fully automatic hydraulic cutting - milling - drilling machine Production of chairs, tables, frames, and furniture parts Max work length 2100 mm Tilt-10° â +45° Rotation-10° â +50° 2 saw blades diameter 400 mm 2 drilling heads left, right can be rotated through 360 °, 8 spindle cross-shaped grid M2fi2 2 additional horizontal drilling heads from behind can be rotated by 360 °, 8 spindle cross-shaped grid 2 milling spindles bore wave 30 mm 1 motor for longitudinal adjustment of 1.5 kW 2 Saegemotore 2.2 kW 4 boring Motors 2.2 kW

Brand SASS Italy Model TRM 2200 Capacity 100 mm Spindle taper MT 6 Drilling depth 500 mm Spindle speed 18-1600 O-min. Horizontal movement 1845 mm Distance table spindle 2230 mm Colum diameter 550 mm T-slot base plate size 22 mm Floor dimensions 3500 x 1250 mm Power 11 Kw Weight 9000 Kg Dimensions L x W x H 3500 x1250 x 3700mm Extra Block table angle adjustable 760 x 1000 x 600 mm Blok table 1000 x 1000 x 600 mm

2 x 750kW Motors with water Cooler available! Description attached!  ...

• more information

Closing force: 180 T Platen dimensions: 1 020 x 1600 mm Max. mould height : 2000 mm Max. mold width : 1200 mm Min. mold thickness: 840 mm Max. mould opening stroke: 895 mm Screw diameter : 120 mm L/D ratio : 28 Max. injectable volume: 25 liters Number of parison programming points : 100 Die Diameter (min/max): 190/450 Voltage: 380 / 50

Code: 0332 Brand: AMASPRES (ITALY) Model: 3000 Membrane press Working size: mm 3000 x 1300 Opening mm 500 Working height mm 250 Cover opening and closing with vertical pneumatic pistons This press is suitable for veneer of shaped pieces , such as window sash frames, curved pieces Upper heating with hot air Heating of lower side with hot air Consuption about 9 kwt Working cycle: about 10 min. Complete compressor for lifting of cover and under cover Processing prevacuum adjustable up to 6.5 atm The machine is equipped with time alarm, thermostat, thermometer, warning lights for calories and pumps Overall dimensions press mm 4100 x 1700 x 2050 h - Weight kg 1800 Overall d ...

Code: 0106 Brand: OMEC - ITALY Model: 650-M Dovetailing machine Technical characteristics: Installed power on board machine Kw 0,75 Max working width mm 420 Center to center of indents mm 25-40-50-80 Overall dimensions: mm 800 x 720 x 1320 h Weight kg 130  ...

• more information

CAPACITY: -Plate width 3000 mm -plate thickness 50 mm -Pre-pinch thickness 40 mm -Minimum rolling dia. 550 mm. CONFIGURATION: -useful surface length on the rolls 3100 mm -upper roll size 480 mm -lower rolls size 440 mm Machine configuration and accessories installed: -Digital position readouts. -Hardening treatment of the 3 rolls. -3 rolls driven hydraulic motorized with independent axial gear box on each roll. -Conical plate bending tiltable side rolls hydraulic, hardened contrast pad. -Overload safety hydraulic protection -Synchronized hydraulic rotation -Hydraulic power unit 40Hp motor. 3phase 380/50 -High pressure hydraulic pow ...

Carriage length: 3200 mm; Cutting width at the width stop: 1250 mm; Cutting width at cut-to-length fence: 3200 mm; Cut depth: 200 mm; Scorer: no; Height adjustment saw blade: motorized; Swivel adjustment saw blade: motorized; Width stop adjustment: manual; Swivel range saw blade: 0Â to 45Â; Display saw blade angle: digital; Display cutting height: -; Display width stop: Scala; Display cutting ruler: Scala; Saw blade diameter: 550mm; Speeds: 3000 / 4000 / 5000 rpm; Motor power: 11 kW; Engine brake: yes / automatic; Suction port: 100mm and 120mm; Machine length: 3600mm; Machine width: 2000mm; Weight: 1000kg; Made in Italy

stone drive motor: 0.28 kw (2800 rpm)  ribbon feed motor: 0.18 kw (660 rpm)  motor for the peeling: 0,18 kw (660 rpm) 700x650x2500 mm 150 kg unchecked loaded on truck ...

• more information