used WITTMANN w6

5955 WITTMANN W621 ROBOT, LINEAR ROBOT Wittmann W621 - 2149 Manufacturer: Wittmann Model: W621 - 2149 Year of construction: 2006 Condition: very good (used) Weight: 255 kg Load capacity: 10 kg Dimensions: 2400 x 1000 x 2500 mm Axis: X: -350 J: -1000 Z : -1500 B: left 180° - right 180° Control: Wittmann, Teach Box

Wittmann Accessories Type: W620M -636, Robot System Control: C61-585 Built: 2003 Dimensions and weights Machine weight Kg: 500 Other Removal X- Axis 300 mm PNE Vertical Y- Axis 1000 mm PNE Horizontal Z-axis 1250 mm MOT

Robot WITTMANN W643, Control: CNC 6.2 Horizontal axis Z : 10000mm Demoulding axis X : Robot 1: 1200mm, Robot 2: 1200mm Vertical axis Y : Robot 1: 2600mm, Robot 2: 2600mm 2 vacuum, 3 pressures Euromap 12

Wittmann W613 linear cartesian robot for sale in good condition This is a 3-servo tandem robot suitable for multiple uses. 1., suitable for larger machines (150-250T) as a traditional robot (Z axis perpendicular to the injection molding machine) Fn7ri29 2., suitable for smaller machines (65-120T) as a traditional robot (X axis perpendicular to the injection molding machine) 3., suitable for two smaller machines (65-120T) as a tandem robot (Z axis perpendicular to the injection molding machine) x=900 mm, y=1000 mm, z=2250 mm, c=90 It can be viewed in action and on video. please check out our other ads as well

axis X axis dimension 900mm Y axis dimension 1800mm Z axis dimension 3500mm Torsion axles B i C Drive servo

X axis dimension 900mm Y axis dimension 1800mm Z axis dimension 3500mm Other Torsion axles B i C Drive servo

5 axis robot: 3 axes driven by servo motors, A movement, C axis Rides in the following axes: X-550, Y-1200, Z-2000 The servo inverters are built into the Z axis crossbeam Touch control panel - Teach Box - Control: Teach Box - Stroke (Y): 1.200 mm - Stroke (X): 550 mm - Stroke (Z): 2.000 mm - Driving method: servo

- Pneumatic C 0-90 rotation - Vacuum circuits: 1 - Clamp circuits:2 - Robot support height 450mm. Including - Compatible machine: 450 - 500 t - Control: CNC 6.2 - Stroke (Y): 1.600 mm - Stroke (X): 500 mm - Stroke (Z): 2.000 mm - Payload: 15 Kg - Driving method: servo

Description Sprue Taker Manipulator X axis: 100 mm Y axis: 700 mm Z axis: 45°- 90° Engines: no - Pneumatic axles Gripper rotation: Yes together with Z axis Clamp tipping: No Sprue clamp: Yes Voids: 1 Gripper control: Yes Euromap 12

Offer Conveyor belt Wittmann PA 300x80x80-130cm with photoelectric sensors Year 2018 as good as new ev. unused Image 1-11 The display will be updated even further. We offer the following conveyor belt from a restructuring of our customer: Conveyor belt Wittmann FB 300x80x80-130cm with light barriers control and interface to the machine adjustable in height and angle, fixed on 2 stands, belt is as good as new ev. Unused functional. Was originally designed for use on a Wittmann/Battenfeld injection molding machine. Has not happened. Manufacturer: Wittmann Robot Systeme GmbH Type: PA Series No. .,74774 Machine No.: 5850016886 Year of construction: 2018 Dimensions band: 300 x 80 cm Dimensions plant: 300 x 100 cm Height: adjustable approx., 80-130 cm Angle: adjustable by different height of the stands Belt speed: 2-3 m/min estimated Mobile: no Connection: 400V 5 ...

Offer Injection moulding machine Wittmann Battenfeld SmartPower 110/130H/130L 2K with robot, turntable, conveyor belt Year of construction 2018 The display will be updated even further. We offer the following injection molding machine from a restructuring of our customer: 1. SmartPover Combimould 110/130H/130L Unilog B8 1387649-100 (2 K) with robot, turntable (separate), conveyor belt, danger zone demarcation Figure 1 - 8 Specifications: Voltage: 230/400V/3p 24V control Supply line 1/2: 100/50A Pneum. Pressure range: 6-8 bar Operating hours: 4643 Weight: 6000 kg Injection unit: 130 Screw D: 25mm, LD ratio 22 Spray pressure: 2218 bar Displacement: 61.4 cm³ Injection weight (hp): 55.8 g Injection unit: 130 Screw D: 18, LD ratio 22 Spray pressure: 3000 bar Displacement: 22.9 cm³ Injection weight (hp): 20.8 g Clamping unit: 1100 kN Tie bar distance: 52 ...

Offer Injection moulding machine Wittmann Battenfeld SmartPower 180/525H/210L 2K with turntable, conveyor belt year of construction 2018 The display will be updated even further. We offer the following injection molding machine from a restructuring of our customer: 1. SmartPover 3Combimould 180/525H/210L Unilog B8 139036-100 (2 K) with turntable (separate), conveyor belt, danger zone demarcation Figure 1-8 Specifications: Voltage: 230/400V/3p 24V control Supply line 1/2: 125/50A Pneum. Pressure range: 6-8 bar Operating hours: 2995 Weight: 8750 kg Injection unit: 525 Screw D: 35mm, LD ratio 22 Spray pressure: 2743 bar Displacement: 193 cm³ Injection weight (HP): 175 g Injection unit: 210 Screw D: 35mm, LD ratio 22 Spray pressure: 1500 bar Displacement: 144 cm³ Injection weight (hp): 131 g Clamping unit: 1800 kN Tie bar distance: 570x520 mm Tool ins ...

Offer Injection moulding machine Wittmann Battenfeld SmartPower 350/2250H/350L 2K with turntable, robot, conveyor belt built 2018 The display will be updated even further. We offer the following injection molding machine from a restructuring of our customer: 1. SmartPover 350/2250H/350L Unilog B8 138743-100 (2 K) with turntable, robot conveyor belt, hazard zone demarcation Year 2018 Fig. 1-14 Specifications: Voltage: 230/400V/3p 24V control Rated power: 1. supply line 125 A, 2supply line 34 A Pneum.Pressure range: 6-8 bar Weight: 19500 kg Footprint: 34 m" Injection unit: 1 Screw: D= 65mm (55) LD ratio 22 Spray pressure: 2070 bar Displacement: 1078 cm³ Injection weight (HP): 981 g Injection unit: 2 Snail: D= 40 (18) LD ratio 22 Spray pressure: 1595 bar Displacement: 220 cm³ Injection weight (HP): 202.2 g Closing unit: 3500 kN Tie bar distance: 800x7 ...

Offer Temperature control unit Wittmann Tempro plus D160 3~380V 10kW Year 2018 ca.1000Bh (Pictures 1-7) 7 pieces available - price is per device Original price: 10200 € net 12138 gross Manufacturers:wittmann Vienna Series: TP+ D-S-1:160,SO-A. E.I.6. Type: Tempro D 3 TV00000917+204 Art.Nr TX 00001468 Operating hours: approx. >1000 different Year of construction 05/2018 Technical data (series) Self-optimized microprocessor +- 0.2°C Automatic filling & level overw. Maxiamal temperature monitoring Automatic detection of the direction of rotation pump Control of the heating via solid state relay Dry-running protection Temperature measurement V&R run Pressure Outdoor sensor PT 100 Suction b. Mould change ? Woch timer Alarm contact Hour counter & service display Device-specific 1 circuit system for temperatures up to 160° Heating capacity:7.5-9 kW at 380 ...

Offer Injection moulding machines Wittmann Battenfeld CM 40/210 Unilog B8 Year 2018 The display will be updated even further. We offer the following injection molding machine from a restructuring of our customer: CM 40/210 Unilog B8 138744-100 Fig. 1-7 Specifications: Voltage: 230/400V/3p 24V control Supply line Nennatrom 1/2.: 51/34 A Pneum. Pressure range: 6-8 bar Specifications: Voltage: 230/400V/3p 24V control Supply pipe:? A Pneum. Pressure range: 6-8 bar Operating hours:

Key data: 3000 kN

Wittmann Battenfeld EcoPower 300/750 / Electric machine / production line with Wittmann W821 robot and conveyor belt Year of construction: 2012 Injection unit: Screw diameter: 45 mm Spray weight: 326 g Spray pressure: 2116 bar Dosing volume: 358 ccm Clamping unit: Clamping force: 300 t Tie bar spacing: 770x720 mm Size of clamping plates: 1250x1110 mm Ejector: electric Clamping unit: toggle lever Control: UNILOG B6S - Touchscreen Additional equipment: Production line with Wittmann W821 robot and conveyor belt Electric machine: high-speed, energy-saving and very quiet Perfect technical condition Euromap 67 Robot Interface Air valve x 2 Hydraulic core pull x 1 Hot runner control x 12 Injection unit hardened - Bimetal Automatic tool height adjustment It is possible to change the screw diameter for fi 35, 40, 50 mm Robot Wittmann W821 Year of construction: ...

Wittmann Battenfeld Injection Moulding Machine Here we offer you a SmartPower 210/1330 Thermoset machine. Wittmann Battenfeld injection moulding machine with UNILOG B8 control system Plant was serviced by the manufacturer WITTMANN BATTENFELD Deutschland GmbH in January 2021 / checked and brought up to date As part of the complete review, various updates were installed and the hydraulic oil (600 liters) was refilled. In addition to the already normally existing pressure switches, the system consists of the possibility to install additional internal mold pressure switches 2 pieces Kistler module for mold internal pressure switching range 1: 20,000 pC, range 2: 10,000 pC). The parts for the upgrade mold internal pressure switches are part of the scope of delivery. Injection molding machine: Series: SmartPower Machine type: 210/1330 Control type: UNILOG B8 Machine number: ...

Injection Molding 300T Wittmann, 2017 year at Germany. EcoPower 55 – 550 t EcoPower Xpress 160 – 550 t MicroPower 15 t MacroPower 400 – 2000 t SmartPower 25 – 400 t CM 40 – 80 t VM R 40 – 300 t VM 60 – 200 t VPower 120 – 300 t R WITTMANN BATTENFELD injection molding

Key data: 2000 kN

Wittmann Battenfeld VM 200/525H R1520 Servo Power / Hybrid machine with one turntable Year of construction: 2013 Injection unit: Screw diameter: 40 mm Injection weight: 228.4 g Spray pressure: 2100 bar Dosing volume: 251 ccm Clamping unit: Clamping force: 200 t Size of clamping plates: 0x0 mm Ejector: hydraulic Clamping unit: hydraulic Control: UNILOG B6 Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 38,000 in automatic mode Air Valve x 4 Hydraulic Core Pull x 6 Control with hot runners Injection unit hardened - Bimetal Turntable diameter: 1520 mm Main motor of the machine - servo motor driven by inverter Horizontal injection unit with automatic injection height adjustment The machine can work with a second vertical injection unit Holder for automatic tool clamping Proportional valve on the injectio ...

Key data: 2000 kN

Wittmann Battenfeld VM 200/1000 R1755 / Vertical injection moulding machine with rotary table / Operating hours: approx. 18,000 h in automatic mode Year of construction: 2017 Injection unit: Screw diameter: 55 mm Spraying weight: approx. 570 g Spray pressure: 1666 bar Dosing volume: 594 ccm Clamping unit: Clamping force: 200 t Tie bar spacing: 620x570 mm Size of clamping plates: 0x0 mm Ejector: hydraulic Clamping unit: hydraulic Control: UNILOG B6P - Touchscreen Additional equipment: Vertical Injection Molding Machine with Rotary Table Operating hours: approx. 18,000 h in automatic mode Euromap 67 Robot Interface Air Valve x 4 Core Pull Control Control with hot runners Injection unit hardened - Bimetal Turntable diameter: 1755 mm Infrared Protective Curtains The machine was serviced by the authorized service Wittmann Battenfeld Aluminium platform with st ...

Plastic dryer - Wittmann Drymax 100-150/150M Year of Make: 2006 Dryer with 2 molecular sieves and 2 suction conveyors, 2 silos Silo capacities: each silo 150 liters Silos are hermetically insulated with automatic suction conveyors from the Wittmann brand Silos can work separately and independently with different materials and temperatures Weight: 338 kg Price: On request

Granulator - Wittmann CM5 (3 pcs.) Location: Lodz, Poland Year of construction: 2011 Slow-moving granulator with gearbox Power: 1.1 kW 2 stator knives, 2 x pushers, rotor with the cutters Hopper inlet: 240x210 mm Grinding chamber opening: 240x116 mm Granulator without sieve, regulation of the grinding thickness by means of the hole adjustment between milling and stator knife Granule mill is used for grinding very hard details, waste - just like the crusher Hole for material case is prepared for connecting with suction conveyor All offered equipment is started by our service technicians before it is sold. It is possible to receive a video of the technical tests of the selected equipment or to participate in live technical tests at our company in Łódź. Price: On request

Dryer Wittmann Silmax E600 dryer Year of production 2012

Wittmann W828-0295 X-axis dimension 1100 mm Y-axis dimensions 1200 mm Z axis dimension 2500 mm Lifting capacity 8 kg B-steering axles Servo drive

Wittmann W828-0282 X-axis dimension 1100 mm Y-axis dimensions 1200 mm Z axis dimension 2500 mm Lifting capacity 8 kg B-steering axles Servo drive