used WEINIG unimat 23

Key data: 5 , 230 mm, 140 mm

Four-sided slicer Weinig Type: Unimat 23 Year of construction: 1992 Planing width 20 - 230 mm for tool flight circle D = 140 mm Planing height 6 - 140 mm for tool flight circle D = 125 mm 5 waves: 1. Bottom 5.5 kW 2. Right 5.5 kW 3. Left 7.5 kW 4. Top 7.5 kW 5. Bottom 5.5kw Spindle diameter 40 mm Feed speeds 6 – 29 m/min. Waxilite Pump Manual with distributor for suction hoses complete with planer heads machine has always been well maintained and is in good, ready-to-use condition.

Capacity: 230 x 130 mm. Spindles: 7 Bottom 7,5 kW, right 7,5 kW, left 11 kW, right 7,5 kW, top 11 kW, bottom 11 kW, universal 11kW spindles 2, 3, 4 and 5 are 8000 tr/min straight jointer on 2nd bottom spindle Cardan shaft drive Pneumatic pressures Intermediate driven feedroller for short pieces 0,8 m infeed straightening table manual bed lubrication Spindle diameter: 50 mm. 5 driven rollers in table Feed: 6 - 36 m/min, motor 7,5 kW motor height adjustment

Four-side planer Weinig Unimat 23E cutting out the glazing bead - German production - year of production 2002 - total power 32 kW - pneumatic stroke of the spindles for cutting the glazing bead - 3866 mth TECHNICAL PARAMETERS: - planing width 230 mm - planing height 140 mm - spindle diameter 40 mm - electronic height and width adjustment - the possibility of programming fixed dimensions 1 lower spindle 4 kW 2 left spindle 3 right spindle 7.5 kW 4 right spindle 5.5 kW 5 top spindle 5.5 kW 6 lower spindle 4 kW - power of the feed motor 3 kW - feed speed 5-24 m/min - length of the pre-table 2480 mm - electric brakes - seven upper steel pulling rollers - one upper rubber pulling roller - one roller in the top pulling - air cushion in the countertop - pneumatic pressure - feed on cardan shafts - diameter of connections 140 mm TRANSPORT SIZE 470x220x240 cm  ...

Capacity: 230 x 130 mm. Spindles: 8 Bottom 7.5 kW, fence 7.5 kW, near 7.5 kW, 2nd fence 7.5 kW, 2nd near 7.5 kW, top 11 kW, bottom 7.5 kW universal 11 kW Grooved bed Cardan shaft drive Pneumatic pressures Intermediate driven feedroller for short pieces Automatic bed lubrication Spindle diameter: 40 mm. Spindle speed 8000 r/min 5 driven feedrollers in table Feed: 6 - 36 m/min, motor 5,5 kW Automatic hopperfeed Tooling not included

Four-way planer Weinig Unimat U 23 (Ref. No. 231-2615) with 7 waves Planer width 130 mm Planing height 140 mm Masch. Item no. 023-161 Year of construction 1991 The machine is in good condition, ready for operation. Subject to change, error, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 fax 0041 62 966 21 12

– German production – corrugated top – year of production 1996 – rollers in the countertop pulling TECHNICAL PARAMETERS: planing width 230 mm planing height 160 mm corrugated top spindle diameter 40 mm 1 bottom spindle 7.5 kW 2 right spindle 7.5 kW 3 left spindle 7.5 kW 4 upper spindle 11 kW 5 bottom spindle 7.5 kW smoothly adjustable feed 6-36 m/min feed motor power 5.5 kW six upper steel pulling rollers two top rubber pulling rollers three rollers in the countertop pulling pneumatic feed pressure pneumatic shoe pressure spindles with brakes length of the pre-worktop 1970 mm electric height adjustment central lubrication (split) connection diameter 140 mm dimensions of the machine (L/W/H) 410 / 200 / 180 cm weight ~ 3000 kg